ssd1779g.c

ssd192X_LPC2210_V2.0 LPC2210的16位数据口控制SSD1926

#include "ssd1779.h"
#include "os.h"
#include "mainsublcd.h"
#include "io.h"

int MAINSUBLCD_WIDTH=128;//128;
int MAINSUBLCD_HEIGHT=128;
int MAINSUBLCD_INTERFACE_TYPE=MAINSUBLCD_INTERFACE_8080;
int MAINSUBLCD_PANEL_TYPE=MAINSUBLCD_PANEL_CSTN;

void mainsublcd_hw_init(void)
{
	 SSD_REGWB(REG_Sub_Type,0x80); // Write through 6800 mode
	 SSD_REGWB(REG_Sub_Ctl_0,0x01); // E count hold high for 1 clock
	 SSD_REGWB(REG_Sub_Ctl_1,0x01); // E count hold low for 1 clock

	SSD_REGWB(REG_Sub_Type,SSD_REGRB(REG_Sub_Type)&~0x03);
	SSD_REGWB(REG_Sub_Type,SSD_REGRB(REG_Sub_Type)|0x5);
	SSD_REGWB(REG_Sub_Bpp,0x02);       //2 byte per pixel (16 bpp)
	SSD_REGWB(REG_Sub_CLK_Divide,0x3);        // Clock Divide
        SubCmdWriteByte(0xe2);        // reset

	SubCmdWriteByte( 0x94);
	SubCmdWriteByte( 0xD1);
	SubCmdWriteByte( 0x20);
	SubArgWriteByte( 0x0F);
	
	SubCmdWriteByte( 0x81);
	SubArgWriteByte( 0x15); // 0x15
	SubArgWriteByte( 0x04);// 0x04
	SubCmdWriteByte( 0xAF);
	SubCmdWriteByte( 0x15);
	SubArgWriteByte( 0x04);
	SubArgWriteByte( 0x83);
	SubCmdWriteByte( 0x75);
	SubArgWriteByte( 0x00);
	SubArgWriteByte( 0x7F);
	SubCmdWriteByte( 0x5C);
	SubCmdWriteByte( 0xBB);
	SubArgWriteByte( 0x01);
	SubCmdWriteByte( 0xBC);
	SubArgWriteByte( 0x02);
	SubArgWriteByte( 0x00);
	SubArgWriteByte( 0x00);
	SubCmdWriteByte( 0xFB);
	SubArgWriteByte( 0x03);
	SubCmdWriteByte( 0xF3);
	SubArgWriteByte( 0x90);
	SubArgWriteByte( 0x05);
	SubArgWriteByte( 0x60);
	SubArgWriteByte( 0x84);
	SubCmdWriteByte( 0xF2);
	SubArgWriteByte( 0x05);
	SubArgWriteByte( 0x26);
      	SubCmdWriteByte(0x5c);//write data

}