airopdate.sh

Aircrack-ng is an 802.11 WEP and WPA-PSK keys cracking program that can recover keys once enough dat

#! /bin/bash

# Program:	Airopdate                                                          
# Authors:	Base Code by Daouid
#		Continued by XayOn
# Date:	        21.10.2008

DUMP_PATH=`mktemp -d`

# leave this alone (if you edit this, it will screw up the menu)
CHOICES="1 2 3 4 5"

function chooseversion {
while true; do
  clear
  echo "_____________AIRCRACK__________________"
  echo "##    Select aircrack-ng version     ##"
  echo "##                                   ##"
  echo "##    1) Legacy 0.9.3                ##"
  echo "##    2) Latest Version (1.0-rc1)    ##"
  echo "##    3) Specific revision           ##"
  echo "##___________________________________##"
  read yn
  case $yn in
    1 ) VER="0.9.3"; svn co http://trac.aircrack-ng.org/svn/tags/0.9.3/ aircrack-ng-$VER ; installsvn ; break ;;
    2 ) VER="1.0-rc2"; svn co http://trac.aircrack-ng.org/svn/trunk/ aircrack-ng-$VER ; installsvn ; break ;;
    3 ) svnrev ; break ;;
    * ) echo "unknown response. Try again" ;;
  esac
done 
}

function installsvn {
	cd aircrack-ng-$VER
	make clean && make uninstall && make && make install && cd $DUMP_PATH 
}

function svnrev {
	  echo "_________________SVN___________________"
	  echo "#       Input revision number         #"
	  echo "#_____________________________________#"

	read rev
	echo You typed: $rev
	set -- ${rev}

	svn co -r $rev http://trac.aircrack-ng.org/svn/trunk/ aircrack-ng-r"$rev"
	cd aircrack-ng-r"$rev"

	make clean
	make uninstall
	make
	make install

	cd $DUMP_PATH
}

# This is for airoscript
function airoscript {
	svn co http://trac.aircrack-ng.org/svn/branch/airoscript/ airoscript
	cd airoscript
	make install

	cd $DUMP_PATH
}

# Here goes the section of drivers
function choosedriver {
while true; do
  clear
  echo "#######################################"
  echo "##   Select driver/chipset version  ###"
  echo "##   Currently outdated use         ###"
  echo "##   airdriver-ng instead           ###"
  echo "##    1) ASPj's rt2570 drivers      ###"
  echo "##    2) rt2500                     ###"
  echo "##    3) Madwifi-ng                 ###"
  echo "##    4) Prism54                    ###"
  echo "##    5) Hostap                     ###"
  echo "##    6) Wlanng                     ###"
  echo "##    7) rt61                       ###"
  echo "##    8) rt73                       ###"
  echo "##    9) r8180-sa2400               ###"
  echo "##                                  ###"
  echo "#######################################"
  read yn
  case $yn in
    1 ) rt2570 ; break ;;
    2 ) rt2500 ; break ;;
    3 ) madwifi ; break ;;
    4 ) prism54 ; break ;;
    5 ) hostap ; break ;;
    6 ) wlanng ; break ;;
    7 ) rt61 ; break ;;
    8 ) rt73 ; break ;; 
    9 ) r8180sa2400 ; break ;;
    * ) echo "unknown response. Try again" ;;
  esac
done 
}

function r8180sa2400 {
	ifconfig wlan0 down
	rmmod r8180

	wget http://ovh.dl.sourceforge.net/sourceforge/rtl8180-sa2400/rtl8180-0.21.tar.gz
	wget http://patches.aircrack-ng.org/rtl8180-0.21v2.patch
	tar -xvzf rtl8180-0.21.tar.gz
	cd rtl8180-0.21
	patch -Np1 -i ../rtl8180-0.21v2.patch

	make && make install
	
	depmod -a
	modprobe r8180

	cd $DUMP_PATH
}

function rt61 {
	wget http://rt2x00.serialmonkey.com/rt61-cvs-daily.tar.gz
	tar xvfz rt61-cvs-daily.tar.gz
	cd rt61-cvs-*
	cd Module

	make
	make install

	modprobe rt61

	cd $DUMP_PATH
}

function rt73 {
	wget http://rt2x00.serialmonkey.com/rt73-cvs-daily.tar.gz
	tar xvfz rt73-cvs-daily.tar.gz
	cd rt73-cvs-*
	cd Module

	make
	make install

	modprobe rt73

	cd $DUMP_PATH
}

function hostap {
	ifconfig wlan0 down
	wlanctl-ng wlan0 lnxreq_ifstate ifstate=disable
	/etc/init.d/CardBus stop
	rmmod prism2_pci
	rmmod hostap_pci

	wget http://hostap.epitest.fi/releases/hostap-driver-0.4.9.tar.gz
	tar -xvzf hostap-driver-0.4.9.tar.gz
	cd hostap-driver-0.4.9
	wget http://patches.aircrack-ng.org/hostap-driver-0.4.7.patch
	patch -Np1 -i hostap-driver-0.4.7.patch

	make && make install

	mv -f /etc/pcmcia/wlan-ng.conf /etc/pcmcia/wlan-ng.conf~
	/etc/init.d/pcmcia start
	modprobe hostap_pci &>/dev/null

	cd $DUMP_PATH
}

function wlanng {
	ifconfig wlan0 down
	wlanctl-ng wlan0 lnxreq_ifstate ifstate=disable
	/etc/init.d/pcmcia stop
	rmmod prism2_pci
	rmmod prism2_usb
	rmmod prism2_cs
	rmmod p80211
	rmmod hostap_pci

	find /lib/modules \( -name p80211* -o -name prism2* \) -exec rm -v {} \;
	wget ftp://ftp.linux-wlan.org/pub/linux-wlan-ng/linux-wlan-ng-0.2.8.tar.bz2
	wget http://patches.aircrack-ng.org/linux-wlan-0.2.5.packet.injection.patch
	tar -xjf wlanng-0.2.8.tar.bz2
	cd linux-wlan-ng-0.2.8
	patch -Np1 -i ../linux-wlan-0.2.5.packet.injection.patch

	make autoconfig && make all && make install

	mv /etc/pcmcia/hostap_cs.conf /etc/pcmcia/hostap_cs.conf~
	/etc/init.d/pcmcia start
	modprobe prism2_pci &>/dev/null

	cd $DUMP_PATH
}

function rt2570 {
	ifconfig rausb0 down
	rmmod rt2570

	wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt2570-k2wrlz-1.6.1.tar.bz2
	tar -xvjf rt2570-k2wrlz-1.6.1.tar.bz2
	cd rt2570-k2wrlz-1.6.1/Module

	make && make install

	modprobe rt2570
	
	cd $DUMP_PATH
}

function rt2500 {
	ifconfig ra0 down
	rmmod rt2500

	wget http://rt2x00.serialmonkey.com/rt2500-cvs-daily.tar.gz
	tar -xvzf rt2500-cvs-daily.tar.gz
	cd rt2500-cvs-**********/Module

	make && make install

	modprobe rt2500

	cd $DUMP_PATH
}

function madwifi {
	ifconfig ath0 down
	ifconfig wifi0 down
	
	rmmod wlan_wep ath_rate_sample ath_rate_onoe ath_pci wlan ath_hal ath_rate_amrr 2>/dev/null

	svn checkout http://svn.madwifi.org/trunk/ madwifi-ng
	wget http://patches.aircrack-ng.org/madwifi-ng-r2277.patch
	cd madwifi-ng
	patch -Np1 -i ../madwifi-ng-r2277.patch

	make
	make install
	
	depmod -ae
	modprobe ath_pci

	cd $DUMP_PATH
}

function prism54 {
	ifconfig eth1 down

	rmmod prism54

	wget "http://svnweb.tuxfamily.org/dl.php?repname=prism54+%28prism54%29&path=%2Ftrunk%2F&rev=531&isdir=1" -O prism54_r531.tar.gz
	wget http://patches.aircrack-ng.org/prism54-svn-20050724.patch
	tar -xvzf prism54_r531.tar.gz
	cd trunk
	patch -Np1 -i ../prism54-svn-20050724.patch

	make modules && make install

	wget http://prism54.org/firmware/1.0.4.3.arm

	mkdir -p /usr/lib/hotplug/firmware
	mkdir -p /lib/firmware
	cp 1.0.4.3.arm /usr/lib/hotplug/firmware/isl3890
	mv 1.0.4.3.arm /lib/firmware/isl3890
	depmod -a

	modprobe prism54

	cd $DUMP_PATH
}

# Too bad, I suppose this was copied from main source but... Why? It doesn't make any sense to me.
#function menufonction {
#xterm $HOLD $TOPRIGHT -title "Fake function to jump to menu" -e echo "Aircrack-ng is a great tool, Mister_X ASPj HIRTE are GODS"
#}

# menu listing command	
function menu {
  echo "____________Select_Action_____________________"
  echo "##  1) Aircrack-ng - Get aircrack-ng        ##"
  echo "##  2) Drivers     - Get drivers (outdated) ##"
  echo "##  3) Airoscript  - Get airoscript         ##"
  echo "##  4) Quit        - Exit this script       ##"		
  echo "##__________________________________________##"
}

#######################################################################
# script start
	
	cd $DUMP_PATH
	clear
	menu	

select choix in $CHOICES; do					
	if [ "$choix" = "1" ]; then
		clear
		chooseversion
		clear
		menu			
	elif [ "$choix" = "2" ]; then
		clear
		echo -e "Please use airdriver-ng instead\n"
		menu					
	elif [ "$choix" = "3" ]; then
		clear
		echo "Downloading and installing lastest airoscript version"
		airoscript
		clear
		echo "Installed lastest airoscript version"
		menu	
	elif [ "$choix" = "4" ]; then
		clear
		echo -e "Script terminated\n"
		exit			
	else
		clear
		echo "Wrong number entered"
		menu
	fi
done
#END