📄 cciddriver.c
字号:
/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
//------------------------------------------------------------------------------
/// \unit
///
/// !Purpose
///
/// CCID driver
///
/// !Usage
///
/// Explanation on the usage of the code made available through the header file.
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// Headers
//------------------------------------------------------------------------------
#include <board.h>
#include <utility/trace.h>
#include <usb/device/core/USBD.h>
#include <usb/device/core/USBDDriver.h>
#include <usb/common/core/USBGenericRequest.h>
#include <usb/common/core/USBStringDescriptor.h>
#include <usb/device/ccid/cciddriver.h>
#include <usb/device/ccid/cciddriverdescriptors.h>
#include <iso7816/iso7816_4.h>
#include <string.h>
//------------------------------------------------------------------------------
// Local definition
//------------------------------------------------------------------------------
/// Constants: IDs: Device product ID.
#define CCIDDriverDescriptors_PRODUCTID 0x6129
/// Constants: IDs: Device vendor ID.
#define CCIDDriverDescriptors_VENDORID 0x03EB
/// Constants: IDs: Device release number.
#define CCIDDriverDescriptors_RELEASE 0x0100
/// Returns the minimum between two values.
#define MIN(a, b) ((a < b) ? a : b)
//------------------------------------------------------------------------------
// Types
//------------------------------------------------------------------------------
/// CCIDDriverConfiguration Descriptors
/// List of descriptors that make up the configuration descriptors of a
/// device using the CCID driver.
typedef struct {
/// Configuration descriptor
USBConfigurationDescriptor configuration;
/// Interface descriptor
USBInterfaceDescriptor interface;
/// CCID descriptor
CCIDDescriptor ccid;
/// Bulk OUT endpoint descriptor
USBEndpointDescriptor bulkOut;
/// Bulk IN endpoint descriptor
USBEndpointDescriptor bulkIn;
/// Interrupt OUT endpoint descriptor
USBEndpointDescriptor interruptIn;
} __attribute__ ((packed)) CCIDDriverConfigurationDescriptors;
//------------------------------------------------------------------------------
// Types
//------------------------------------------------------------------------------
/// Driver structure for an CCID device
typedef struct {
/// Standard USB device driver instance
USBDDriver usbdDriver;
/// CCID message
S_ccid_bulk_in_header sCcidMessage;
/// CCID command
S_ccid_bulk_out_header sCcidCommand;
/// Interrupt message answer
unsigned char BufferINT[4];
/// Buffer data of message
unsigned char ProtocolDataStructure[10];
/// Protocol used
unsigned char bProtocol;
/// SlotStatus
/// Bit 0 = Slot 0 current state
/// Bit 1 = Slot 0 changed status
/// Bit 2 = Slot 1 current state
/// Bit 3 = Slot 1 changed status
/// Bit 4 = Slot 2 current state
/// Bit 5 = Slot 2 changed status
unsigned char SlotStatus;
} CCIDDriver;
//------------------------------------------------------------------------------
// Local variables
//------------------------------------------------------------------------------
/// Static instance of the CCID device driver.
static CCIDDriver ccidDriver;
/// Standard USB device descriptor.
static const USBDeviceDescriptor deviceDescriptor = {
sizeof(USBDeviceDescriptor),
USBGenericDescriptor_DEVICE,
USBDeviceDescriptor_USB2_00,
0,
0,
0,
BOARD_USB_ENDPOINTS_MAXPACKETSIZE(0),
CCIDDriverDescriptors_VENDORID,
CCIDDriverDescriptors_PRODUCTID,
CCIDDriverDescriptors_RELEASE,
1, // Index of manufacturer description
2, // Index of product description
3, // Index of serial number description
1 // One possible configuration
};
/// List of configuration descriptors.
static const CCIDDriverConfigurationDescriptors configurationDescriptorsFS = {
// Standard USB configuration descriptor
{
sizeof(USBConfigurationDescriptor),
USBGenericDescriptor_CONFIGURATION,
sizeof(CCIDDriverConfigurationDescriptors),
1, // One interface in this configuration
1, // This is configuration #1
0, // No associated string descriptor
BOARD_USB_BMATTRIBUTES,
USBConfigurationDescriptor_POWER(100)
},
// CCID interface descriptor
// Table 4.3-1 Interface Descriptor
// Interface descriptor
{
sizeof(USBInterfaceDescriptor),
USBGenericDescriptor_INTERFACE,
0, // Interface 0
0, // No alternate settings
3, // uses bulk-IN, bulk-OUT and interrupt朓N
SMART_CARD_DEVICE_CLASS,
0, // Subclass code
0, // bulk transfers optional interrupt-IN
0 // No associated string descriptor
},
{
sizeof(CCIDDescriptor), // bLength: Size of this descriptor in bytes
CCID_DECRIPTOR_TYPE, // bDescriptorType:Functional descriptor type
CCID1_10, // bcdCCID: CCID version
0, // bMaxSlotIndex: Value 0 indicates that one slot is supported
VOLTS_5_0, // bVoltageSupport
PROTOCOL_TO, // dwProtocols
3580, // dwDefaultClock
3580, // dwMaxClock
0, // bNumClockSupported
9600, // dwDataRate : 9600 bauds
9600, // dwMaxDataRate : 9600 bauds
0, // bNumDataRatesSupported
0xfe, // dwMaxIFSD
0, // dwSynchProtocols
0, // dwMechanical
//0x00010042, // dwFeatures: Short APDU level exchanges
CCID_FEATURES_AUTO_PCONF | CCID_FEATURES_AUTO_PNEGO | CCID_FEATURES_EXC_TPDU,
0x0000010F, // dwMaxCCIDMessageLength: For extended APDU level the value shall be between 261 + 10
0xFF, // bClassGetResponse: Echoes the class of the APDU
0xFF, // bClassEnvelope: Echoes the class of the APDU
0, // wLcdLayout: no LCD
0, // bPINSupport: No PIN
1 // bMaxCCIDBusySlot
},
// Bulk-OUT endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_OUT, CCID_EPT_DATA_OUT ),
USBEndpointDescriptor_BULK,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_DATA_OUT),
USBEndpointDescriptor_MAXBULKSIZE_FS),
0x00 // Does not apply to Bulk endpoints
},
// Bulk-IN endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_IN, CCID_EPT_DATA_IN ),
USBEndpointDescriptor_BULK,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_DATA_IN),
USBEndpointDescriptor_MAXBULKSIZE_FS),
0x00 // Does not apply to Bulk endpoints
},
// Notification endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_IN, CCID_EPT_NOTIFICATION ),
USBEndpointDescriptor_INTERRUPT,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_NOTIFICATION),
USBEndpointDescriptor_MAXINTERRUPTSIZE_FS),
0x10
}
};
#ifdef BOARD_USB_UDPHS
static const CCIDDriverConfigurationDescriptors configurationDescriptorsHS = {
// Standard USB configuration descriptor
{
sizeof(USBConfigurationDescriptor),
USBGenericDescriptor_CONFIGURATION,
sizeof(CCIDDriverConfigurationDescriptors),
1, // One interface in this configuration
1, // This is configuration #1
0, // No associated string descriptor
BOARD_USB_BMATTRIBUTES,
USBConfigurationDescriptor_POWER(100)
},
// CCID interface descriptor
// Table 4.3-1 Interface Descriptor
// Interface descriptor
{
sizeof(USBInterfaceDescriptor),
USBGenericDescriptor_INTERFACE,
0, // Interface 0
0, // No alternate settings
3, // uses bulk-IN, bulk-OUT and interrupt朓N
SMART_CARD_DEVICE_CLASS,
0, // Subclass code
0, // bulk transfers optional interrupt-IN
0 // No associated string descriptor
},
{
sizeof(CCIDDescriptor), // bLength: Size of this descriptor in bytes
CCID_DECRIPTOR_TYPE, // bDescriptorType:Functional descriptor type
CCID1_10, // bcdCCID: CCID version
0, // bMaxSlotIndex: Value 0 indicates that one slot is supported
VOLTS_5_0, // bVoltageSupport
PROTOCOL_TO, // dwProtocols
3580, // dwDefaultClock
3580, // dwMaxClock
0, // bNumClockSupported
9600, // dwDataRate : 9600 bauds
9600, // dwMaxDataRate : 9600 bauds
0, // bNumDataRatesSupported
0xfe, // dwMaxIFSD
0, // dwSynchProtocols
0, // dwMechanical
//0x00010042, // dwFeatures: Short APDU level exchanges
CCID_FEATURES_AUTO_PCONF | CCID_FEATURES_AUTO_PNEGO | CCID_FEATURES_EXC_TPDU,
0x0000010F, // dwMaxCCIDMessageLength: For extended APDU level the value shall be between 261 + 10
0xFF, // bClassGetResponse: Echoes the class of the APDU
0xFF, // bClassEnvelope: Echoes the class of the APDU
0, // wLcdLayout: no LCD
0, // bPINSupport: No PIN
1 // bMaxCCIDBusySlot
},
// Bulk-OUT endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_OUT, CCID_EPT_DATA_OUT ),
USBEndpointDescriptor_BULK,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_DATA_OUT),
USBEndpointDescriptor_MAXBULKSIZE_HS),
0x00 // Does not apply to Bulk endpoints
},
// Bulk-IN endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_IN, CCID_EPT_DATA_IN ),
USBEndpointDescriptor_BULK,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_DATA_IN),
USBEndpointDescriptor_MAXBULKSIZE_HS),
0x00 // Does not apply to Bulk endpoints
},
// Notification endpoint descriptor
{
sizeof(USBEndpointDescriptor),
USBGenericDescriptor_ENDPOINT,
USBEndpointDescriptor_ADDRESS( USBEndpointDescriptor_IN, CCID_EPT_NOTIFICATION ),
USBEndpointDescriptor_INTERRUPT,
MIN(BOARD_USB_ENDPOINTS_MAXPACKETSIZE(CCID_EPT_NOTIFICATION),
USBEndpointDescriptor_MAXINTERRUPTSIZE_HS),
0x10
}
};
/// Qualifier descriptor
const USBDeviceQualifierDescriptor deviceQualifierDescriptor = {
sizeof(USBDeviceQualifierDescriptor), // Size of this descriptor in bytes
USBGenericDescriptor_DEVICEQUALIFIER, // Qualifier Descriptor Type
USBDeviceDescriptor_USB2_00, // USB specification 2.00
0x00, // Class is specified in interface
0x00, // Subclass is specified in interface
0x00, // Protocol is specified in interface
BOARD_USB_ENDPOINTS_MAXPACKETSIZE(0),
0x01, // One possible configuration
0x00 // Reserved for future use, must be zero
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -