usbdcallbacks_resumed.lst

本代bootloader通过usb下载代码首先存放在sdram中

###############################################################################
#                                                                             #
#                                                       28/Apr/2009  09:28:24 #
# IAR ARM ANSI C/C++ Compiler V5.11.0.20622/W32 EVALUATION                    #
# Copyright 1999-2007 IAR Systems. All rights reserved.                       #
#                                                                             #
#    Cpu mode     =  arm                                                      #
#    Endian       =  little                                                   #
#    Source file  =  E:\workplace\bootloaderOK\at91lib\usb\device\core\USBDCa #
#                    llbacks_Resumed.c                                        #
#    Command line =  E:\workplace\bootloaderOK\at91lib\usb\device\core\USBDCa #
#                    llbacks_Resumed.c -D at91sam7se512 -D flash -D           #
#                    TRACE_LEVEL=4 -lC E:\workplace\bootloaderOK\at91sam7se-e #
#                    k\basic-dataflash-project\ewp\at91sam7se512_flash\List\  #
#                    --remarks --diag_suppress Pe826,Pe1375 -o                #
#                    E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\at91sam7se512_flash\Obj\ --no_cse            #
#                    --no_unroll --no_inline --no_code_motion --no_tbaa       #
#                    --no_clustering --no_scheduling --debug --endian little  #
#                    --cpu ARM7TDMI -e --fpu None --dlib_config "D:\Program   #
#                    Files\arm\ARM\INC\DLib_Config_Full.h" -I                 #
#                    E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\..\..\..\at91lib/peripherals\ -I             #
#                    E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\..\..\..\at91lib\ -I                         #
#                    E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\..\..\..\at91lib/memories\ -I                #
#                    E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\..\..\..\at91lib/boards/at91sam7se-ek\ -I    #
#                    "D:\Program Files\arm\ARM\INC\" --interwork --cpu_mode   #
#                    arm -Oh                                                  #
#    List file    =  E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\at91sam7se512_flash\List\USBDCallbacks_Resum #
#                    ed.lst                                                   #
#    Object file  =  E:\workplace\bootloaderOK\at91sam7se-ek\basic-dataflash- #
#                    project\ewp\at91sam7se512_flash\Obj\USBDCallbacks_Resume #
#                    d.o                                                      #
#                                                                             #
#                                                                             #
###############################################################################

E:\workplace\bootloaderOK\at91lib\usb\device\core\USBDCallbacks_Resumed.c
      1          /* ----------------------------------------------------------------------------
      2           *         ATMEL Microcontroller Software Support 
      3           * ----------------------------------------------------------------------------
      4           * Copyright (c) 2008, Atmel Corporation
      5           *
      6           * All rights reserved.
      7           *
      8           * Redistribution and use in source and binary forms, with or without
      9           * modification, are permitted provided that the following conditions are met:
     10           *
     11           * - Redistributions of source code must retain the above copyright notice,
     12           * this list of conditions and the disclaimer below.
     13           *
     14           * Atmel's name may not be used to endorse or promote products derived from
     15           * this software without specific prior written permission.
     16           *
     17           * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
     18           * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
     19           * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
     20           * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
     21           * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
     22           * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
     23           * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
     24           * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
     25           * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
     26           * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     27           * ----------------------------------------------------------------------------
     28           */
     29          
     30          //------------------------------------------------------------------------------
     31          //         Headers
     32          //------------------------------------------------------------------------------
     33          
     34          #include "USBDCallbacks.h"
     35          #include "USBD.h"
     36          #include <utility/led.h>
     37          
     38          //------------------------------------------------------------------------------
     39          //         Exported function
     40          //------------------------------------------------------------------------------
     41          
     42          //------------------------------------------------------------------------------
     43          /// Invoked when the USB device leaves the Suspended state. By default,
     44          /// configures the LEDs.
     45          //------------------------------------------------------------------------------

   \                                 In section .text, align 4, keep-with-next
     46          void USBDCallbacks_Resumed(void)
     47          {
   \                     USBDCallbacks_Resumed:
   \   00000000   01402DE9           PUSH     {R0,LR}
     48              // Initialize LEDs
     49              LED_Configure(USBD_LEDPOWER);
   \   00000004   0000A0E3           MOV      R0,#+0
   \   00000008   ........           BL       LED_Configure
     50              LED_Set(USBD_LEDPOWER);
   \   0000000C   0000A0E3           MOV      R0,#+0
   \   00000010   ........           BL       LED_Set
     51              LED_Configure(USBD_LEDUSB);
   \   00000014   0100A0E3           MOV      R0,#+1
   \   00000018   ........           BL       LED_Configure
     52              LED_Clear(USBD_LEDUSB);
   \   0000001C   0100A0E3           MOV      R0,#+1
     53          }
   \   00000020   0050BDE8           POP      {R12,LR}
   \   00000024   ........           B        LED_Clear        ;; tailcall
     54          

   Maximum stack usage in bytes:

     Function              .cstack
     --------              -------
     USBDCallbacks_Resumed      8


   Section sizes:

     Function/Label        Bytes
     --------------        -----
     USBDCallbacks_Resumed   40

 
 40 bytes in section .text
 
 40 bytes of CODE memory

Errors: none
Warnings: none