📄 rfc2787.txt
字号:
STATUS current DESCRIPTION "In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `vrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vrrpOperEntry 8 } vrrpOperAuthType OBJECT-TYPE SYNTAX INTEGER { noAuthentication(1), -- VRRP protocol exchanges are not -- authenticated. simpleTextPassword(2), -- Exchanges are authenticated by a -- clear text password. ipAuthenticationHeader(3) -- Exchanges are authenticated using -- the IP authentication header. } MAX-ACCESS read-create STATUS current DESCRIPTIONJewell & Chuang Standards Track [Page 16] RFC 2787 VRRP MIB Management Objects March 2000 "Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { noAuthentication } ::= { vrrpOperEntry 9 } vrrpOperAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, vrrpOperAuthKey always returns an Octet String of length zero." ::= { vrrpOperEntry 10 } vrrpOperAdvertisementInterval OBJECT-TYPE SYNTAX Integer32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements." DEFVAL { 1 } ::= { vrrpOperEntry 11 } vrrpOperPreemptMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether a higher priority virtual router will preempt a lower priority master." DEFVAL { true } ::= { vrrpOperEntry 12 } vrrpOperVirtualRouterUpTime OBJECT-TYPEJewell & Chuang Standards Track [Page 17] RFC 2787 VRRP MIB Management Objects March 2000 SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'." ::= { vrrpOperEntry 13 } vrrpOperProtocol OBJECT-TYPE SYNTAX INTEGER { ip (1), bridge (2), decnet (3), other (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on the standards track." DEFVAL { ip } ::= { vrrpOperEntry 14 } vrrpOperRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `vrrpOperAdminState', can be modified. Prior to setting the `vrrpOperRowStatus' object from `active' to a different value, the `vrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3).Jewell & Chuang Standards Track [Page 18] RFC 2787 VRRP MIB Management Objects March 2000 In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `vrrpOperVrId' has been set and there is at least one active row in the `vrrpAssoIpAddrTable' defining an associated IP address for the virtual router." ::= { vrrpOperEntry 15 }-- *******************************************************************-- VRRP Associated IP Address Table-- ******************************************************************* vrrpAssoIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addresses associated with this virtual router." ::= { vrrpOperations 4 } vrrpAssoIpAddrEntry OBJECT-TYPE SYNTAX VrrpAssoIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpOperIpAddrCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'." INDEX { ifIndex, vrrpOperVrId, vrrpAssoIpAddr } ::= { vrrpAssoIpAddrTable 1 } VrrpAssoIpAddrEntry ::= SEQUENCE { vrrpAssoIpAddr IpAddress, vrrpAssoIpAddrRowStatus RowStatus } vrrpAssoIpAddr OBJECT-TYPE SYNTAX IpAddressJewell & Chuang Standards Track [Page 19] RFC 2787 VRRP MIB Management Objects March 2000 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The assigned IP addresses that a virtual router is responsible for backing up." ::= { vrrpAssoIpAddrEntry 1 } vrrpAssoIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated address from the virtual router. The use of other values is implementation-dependent." ::= { vrrpAssoIpAddrEntry 2 }-- *******************************************************************-- VRRP Router Statistics-- ******************************************************************* vrrpRouterChecksumErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an invalid VRRP checksum value." ::= { vrrpStatistics 1 } vrrpRouterVersionErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received with an unknown or unsupported version number." ::= { vrrpStatistics 2 } vrrpRouterVrIdErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS currentJewell & Chuang Standards Track [Page 20] RFC 2787 VRRP MIB Management Objects March 2000 DESCRIPTION "The total number of VRRP packets received with an invalid VRID for this virtual router." ::= { vrrpStatistics 3 }-- *******************************************************************-- VRRP Router Statistics Table-- ******************************************************************* vrrpRouterStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of virtual router statistics." ::= { vrrpStatistics 4 } vrrpRouterStatsEntry OBJECT-TYPE SYNTAX VrrpRouterStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the table, containing statistics information about a given virtual router." AUGMENTS { vrrpOperEntry } ::= { vrrpRouterStatsTable 1 } VrrpRouterStatsEntry ::= SEQUENCE { vrrpStatsBecomeMaster Counter32, vrrpStatsAdvertiseRcvd Counter32, vrrpStatsAdvertiseIntervalErrors Counter32, vrrpStatsAuthFailures Counter32, vrrpStatsIpTtlErrors Counter32, vrrpStatsPriorityZeroPktsRcvd Counter32, vrrpStatsPriorityZeroPktsSent Counter32, vrrpStatsInvalidTypePktsRcvd Counter32, vrrpStatsAddressListErrors Counter32, vrrpStatsInvalidAuthTypeJewell & Chuang Standards Track [Page 21] RFC 2787 VRRP MIB Management Objects March 2000 Counter32, vrrpStatsAuthTypeMismatch Counter32, vrrpStatsPacketLengthErrors Counter32 } vrrpStatsBecomeMaster OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of times that this virtual router's state has transitioned to MASTER." ::= { vrrpRouterStatsEntry 1 } vrrpStatsAdvertiseRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisements received by this virtual router." ::= { vrrpRouterStatsEntry 2 } vrrpStatsAdvertiseIntervalErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router." ::= { vrrpRouterStatsEntry 3 } vrrpStatsAuthFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received that do not pass the authentication check." ::= { vrrpRouterStatsEntry 4 } vrrpStatsIpTtlErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS currentJewell & Chuang Standards Track [Page 22] RFC 2787 VRRP MIB Management Objects March 2000 DESCRIPTION "The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255." ::= { vrrpRouterStatsEntry 5 } vrrpStatsPriorityZeroPktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets received by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 6 } vrrpStatsPriorityZeroPktsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of VRRP packets sent by the virtual router with a priority of '0'." ::= { vrrpRouterStatsEntry 7 } vrrpStatsInvalidTypePktsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of VRRP packets received by the virtual router with an invalid value in the 'type' field." ::= { vrrpRouterStatsEntry 8 } vrrpStatsAddressListErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received for which the address list does not match the locally configured list for the virtual router." ::= { vrrpRouterStatsEntry 9 } vrrpStatsInvalidAuthType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with an unknownJewell & Chuang Standards Track [Page 23] RFC 2787 VRRP MIB Management Objects March 2000 authentication type." ::= { vrrpRouterStatsEntry 10 } vrrpStatsAuthTypeMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType')."⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -