rfc2758.txt

中、英文RFC文档大全打包下载完全版 .

         default for this object and a value MUST be specified
         prior to activating this entry when monitorMinRate(0)
         is selected.

         Note: The corresponding slapmPolicyMonitorControl
         BITS setting, enableAggregateTraps(3), MUST be selected
         in order for any notification relating to this entry to
         potentially be generated."
      ::= { slapmPolicyMonitorEntry 12 }

   slapmPolicyMonitorMaxRateHigh OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "kilobits per second"
      MAX-ACCESS  read-create
      STATUS      deprecated
      DESCRIPTION
         "The threshold for generating a
         slapmMonitoredEventNotAchieved notification, signalling
         that a monitored maximum transfer rate has been exceeded.

         A slapmMonitoredEventNotAchieved notification is not
         generated again for an slapmPolicyMonitorEntry until the
         maximum transfer rate fails below
         slapmPolicyMonitorMaxRateLow (a slapmMonitoredEventOkay
         notification is then transmitted) and then raises above
         slapmPolicyMonitorMaxRateHigh.  This behavior reduces the
         slapmMonitoredEventNotAchieved notifications that are
         transmitted.

         A value of zero for this object is returned when the
         slapmPolicyMonitorControl monitorMaxRate(1) is not
         enabled.  When enabled the default value for this object
         is the max rate value specified in the associated
         action definition plus 10%.  If the action definition



White                         Experimental                     [Page 25]

RFC 2758                       SLAPM-MIB                   February 2000


         doesn't have a max rate defined then there is no
         default for this object and a value MUST be specified
         prior to activating this entry when monitorMaxRate(1)
         is selected.

         Note: The corresponding slapmPolicyMonitorControl
         BITS setting, enableAggregateTraps(3), MUST be selected in
         order for any notification relating to this entry to
         potentially be generated."
      ::= { slapmPolicyMonitorEntry 13 }

   slapmPolicyMonitorMaxRateLow OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "kilobits per second"
      MAX-ACCESS  read-create
      STATUS      deprecated
      DESCRIPTION
         "The threshold for generating a slapmMonitoredEventOkay
         notification, signalling that a monitored maximum
         transfer rate has fallen to an acceptable level.

         A value of zero for this object is returned when the
         slapmPolicyMonitorControl monitorMaxRate(1) is not
         enabled.  When enabled the default value for this object
         is the max rate value specified in the associated
         action definition minus 10%.  If the action definition
         doesn't have a max rate defined then there is no
         default for this object and a value MUST be specified
         prior to activating this entry when monitorMaxRate(1)
         is selected.

         Note: The corresponding slapmPolicyMonitorControl
         BITS setting, enableAggregateTraps(3), MUST be selected in
         order for any notification relating to this entry to
         potentially be generated."
      ::= { slapmPolicyMonitorEntry 14 }

   slapmPolicyMonitorMaxDelayHigh OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      deprecated
      DESCRIPTION
         "The threshold for generating a
         slapmMonitoredEventNotAchieved notification, signalling
         that a monitored maximum delay rate has been exceeded.

         A slapmMonitoredEventNotAchieved notification is not



White                         Experimental                     [Page 26]

RFC 2758                       SLAPM-MIB                   February 2000


         generated again for an slapmPolicyMonitorEntry until
         the maximum delay rate falls below
         slapmPolicyMonitorMaxDelayLow (a slapmMonitoredEventOkay
         notification is then transmitted) and raises above
         slapmPolicyMonitorMaxDelayHigh.  This behavior reduces
         the slapmMonitoredEventNotAchieved notifications that are
         transmitted.

         A value of zero for this object is returned when the
         slapmPolicyMonitorControl monitorMaxDelay(4) is not
         enabled.  When enabled the default value for this object
         is the max delay value specified in the associated
         action definition plus 10%.  If the action definition
         doesn't have a max delay defined then there is no
         default for this object and a value MUST be specified
         prior to activating this entry when monitorMaxDelay(4)
         is selected.

         Note: The corresponding slapmPolicyMonitorControl
         BITS setting, enableAggregateTraps(3), MUST be selected
         in order for any notification relating to this entry to
         potentially be generated."
      ::= { slapmPolicyMonitorEntry 15 }

   slapmPolicyMonitorMaxDelayLow OBJECT-TYPE
      SYNTAX      Integer32
      UNITS       "milliseconds"
      MAX-ACCESS  read-create
      STATUS      deprecated
      DESCRIPTION
         "The threshold for generating a slapmMonitoredEventOkay
         notification, signalling that a monitored maximum delay
         rate has fallen to an acceptable level.

         A value of zero for this object is returned when the
         slapmPolicyMonitorControl monitorMaxDelay(4) is not
         enabled.  When enabled the default value for this object
         is the max delay value specified in the associated
         action definition minus 10%.  If the action definition
         doesn't have a max delay defined then there is no
         default for this object and a value MUST be specified
         prior to activating this entry when monitorMaxDelay(4)
         is selected.

         Note: The corresponding slapmPolicyMonitorControl
         BITS setting, enableAggregateTraps(3), MUST be selected
         in order for any notification relating to this entry to
         potentially be generated."



White                         Experimental                     [Page 27]

RFC 2758                       SLAPM-MIB                   February 2000


      ::= { slapmPolicyMonitorEntry 16 }

   slapmPolicyMonitorMinInRateNotAchieves OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The number of times that a minimum transfer in rate
          was not achieved."
      ::= { slapmPolicyMonitorEntry 17 }

   slapmPolicyMonitorMaxInRateExceeds OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The number of times that a maximum transfer in rate
          was exceeded."
      ::= { slapmPolicyMonitorEntry 18 }

   slapmPolicyMonitorMaxDelayExceeds OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The number of times that a maximum delay in rate
          was exceeded."
      ::= { slapmPolicyMonitorEntry 19 }

   slapmPolicyMonitorMinOutRateNotAchieves OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The number of times that a minimum transfer out rate
          was not achieved."
      ::= { slapmPolicyMonitorEntry 20 }

   slapmPolicyMonitorMaxOutRateExceeds OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The number of times that a maximum transfer out rate
          was exceeded."
      ::= { slapmPolicyMonitorEntry 21 }

   slapmPolicyMonitorCurrentDelayRate OBJECT-TYPE



White                         Experimental                     [Page 28]

RFC 2758                       SLAPM-MIB                   February 2000


      SYNTAX      Gauge32
      UNITS       "milliseconds"
      MAX-ACCESS  read-only
      STATUS      deprecated
      DESCRIPTION
          "The current delay rate for this entry.  This is
          calculated by taking the average of the TCP
          round trip times for all associating
          slapmSubcomponentTable entries within a interval."
      ::= { slapmPolicyMonitorEntry 22 }

   slapmPolicyMonitorRowStatus  OBJECT-TYPE
      SYNTAX       RowStatus
      MAX-ACCESS   read-create
      STATUS       deprecated
      DESCRIPTION
        "This object allows entries to be created and deleted
         in the slapmPolicyMonitorTable.  An entry in this table
         is deleted by setting this object to destroy(6).

         Removal of a corresponding (same policy and traffic profile
         names) slapmPolicyStatsEntry has the side effect of the
         automatic deletion an entry in this table."
      ::= { slapmPolicyMonitorEntry 23 }

   -- Subcomponent Table

   slapmSubcomponentTable OBJECT-TYPE
       SYNTAX      SEQUENCE OF SlapmSubcomponentEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
            "Defines a table to provide information on the
            individually components that are mapped to
            a policy rule (or old traffic profile).

            The indexing for this table is designed to support
            the use of an SNMP GET-NEXT operation using only
            the remote address and remote port as a way for
            a management station to retrieve the table entries
            relating to a particular client."
       ::= { slapmTableObjects 3 }

   slapmSubcomponentEntry OBJECT-TYPE
       SYNTAX      SlapmSubcomponentEntry
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION



White                         Experimental                     [Page 29]

RFC 2758                       SLAPM-MIB                   February 2000


            "Describes a particular subcomponent entry.  This
            table does not have an OwnerIndex as
            part of its indexing since this table's contents
            is intended to span multiple users."
       INDEX {
               slapmSubcomponentRemAddress,
               slapmSubcomponentRemPort,
               slapmSubcomponentLocalAddress,
               slapmSubcomponentLocalPort
             }
       ::= { slapmSubcomponentTable 1 }

   SlapmSubcomponentEntry ::=
       SEQUENCE {
            slapmSubcomponentRemAddress            OCTET STRING,
            slapmSubcomponentRemPort               Integer32,
            slapmSubcomponentLocalAddress          OCTET STRING,
            slapmSubcomponentLocalPort             Integer32,
            slapmSubcomponentProtocol              INTEGER,
            slapmSubcomponentSystemAddress         OCTET STRING,
            slapmSubcomponentPolicyName            SlapmNameType,
            slapmSubcomponentTrafficProfileName    SlapmNameType,
            slapmSubcomponentLastActivity          DateAndTime,
            slapmSubcomponentInOctets              Counter32,
            slapmSubcomponentOutOctets             Counter32,
            slapmSubcomponentTcpOutBufferedOctets  Counter32,
            slapmSubcomponentTcpInBufferedOctets   Counter32,
            slapmSubcomponentTcpReXmts             Counter32,
            slapmSubcomponentTcpRoundTripTime      Integer32,
            slapmSubcomponentTcpRoundTripVariance  Integer32,
            slapmSubcomponentInPdus                Counter32,
            slapmSubcomponentOutPdus               Counter32,
            slapmSubcomponentApplName              SnmpAdminString,
            slapmSubcomponentMonitorStatus         SlapmStatus,
            slapmSubcomponentMonitorIntTime        DateAndTime,
            slapmSubcomponentMonitorCurrentInRate  Gauge32,
            slapmSubcomponentMonitorCurrentOutRate Gauge32,
            slapmSubcomponentPolicyRuleIndex       Unsigned32
         }

   slapmSubcomponentRemAddress OBJECT-TYPE
      SYNTAX      OCTET STRING (SIZE(0 | 4 | 16))
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
         "Indicate the remote address of a subcomponent.
         A remote address can be either an ipv4 address in which
         case 4 octets are required or as an ipv6 address that



White                         Experimental                     [Page 30]

RFC 2758                       SLAPM-MIB                   February 2000


         requires 16 octets.  The value of this subidentifier
         is a zero length octet string when this entry relates
         to a UDP listener."
      ::= { slapmSubcomponentEntry 1 }

   slapmSubcomponentRemPort OBJECT-TYPE
      SYNTAX      Integer32(0..65535)
      MAX-ACCESS  not-accessible
      STATUS      current
      DESCRIPTION
         "Indicate the remote port of a subcomponent.
         The value of this subidentifier
         is 0 when this entry relates to a UDP listener."
      ::= { slapmSubcomponentEntry 2 }

   slapmSubcomponentLocalAddress OBJECT-TYPE
      SYNTAX      OCTET STRING (SIZE(4 | 16))
      MAX-ACCESS  not-accessible
      STATUS