rfc1461.txt

中、英文RFC文档大全打包下载完全版 .

                  mioxPeerIndex
                          PositiveInteger,
                  mioxPeerStatus
                          INTEGER,
                  mioxPeerMaxCircuits
                          PositiveInteger,
                  mioxPeerIfIndex
                          PositiveInteger,
                  mioxPeerConnectSeconds
                          Counter,
                  mioxPeerX25CallParamId
                          InstancePointer,
                  mioxPeerEnAddr
                          OCTET STRING,
                  mioxPeerX121Address
                          X121Address,
                  mioxPeerX25CircuitId
                          InstancePointer,
                  mioxPeerDescr
                          DisplayString
                  }

          mioxPeerIndex   OBJECT-TYPE
                  SYNTAX  PositiveInteger



Throop                                                         [Page 11]

RFC 1461        Multiprotocol Interconnect on X.25 MIB          May 1993


                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "An index value that distinguished one entry
                          from another.  This index is independent of
                          any other index."
                  ::= { mioxPeerEntry 1 }

          -- Systems can claim conformance with this MIB without
          -- implementing sets to mioxPeerStatus with a value of
          -- clearCall or makeCall.
          -- All other defined values must be accepted.
          -- Implementors should realize that allowing these values
          -- provides richer management, and implementations
          -- are encouraged to accept these values.
          mioxPeerStatus OBJECT-TYPE
                  SYNTAX  INTEGER {
                                  valid (1),
                                  createRequest (2),
                                  underCreation (3),
                                  invalid (4),
                                  clearCall (5),
                                  makeCall (6)
                                  }
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "This reports the status of a peer entry.
                          A value of valid indicates a normal entry
                          that is in use by the agent.  A value of
                          underCreation indicates a newly created
                          entry which isn't yet in use because the
                          creating management station is still setting
                          values.

                          The value of invalid indicates the entry is
                          no longer in use and the agent is free to
                          delete the entry at any time.  A management
                          station is also free to use an entry in the
                          invalid state.

                          Entries are created by setting a value of
                          createRequest.  Only non-existent or invalid
                          entries can be set to createRequest.  Upon
                          receiving a valid createRequest, the agent
                          will create an entry in the underCreation
                          state.  This object can not be set to a
                          value of underCreation directly, entries can



Throop                                                         [Page 12]

RFC 1461        Multiprotocol Interconnect on X.25 MIB          May 1993


                          only be created by setting a value of
                          createRequest.  Entries that exist in other
                          than the invalid state can not be set to
                          createRequest.

                          Entries with a value of underCreation are
                          not used by the system and the management
                          station can change the values of other
                          objects in the table entry.  Management
                          stations should also remember to configure
                          values in the mioxPeerEncTable with the same
                          peer index value as this peer entry.

                          An entry in the underCreation state can be
                          set to valid or invalid.  Entries in the
                          underCreation state will stay in that state
                          until 1) the agent times them out, 2) they
                          are set to valid, 3) they are set to
                          invalid.  If an agent notices an entry has
                          been in the underCreation state for an
                          abnormally long time, it may decide the
                          management station has failed and invalidate
                          the entry.  A prudent agent will understand
                          that the management station may need to wait
                          for human input and will allow for that
                          possibility in its determination of this
                          abnormally long period.

                          Once a management station has completed all
                          fields of an entry, it will set a value of
                          valid.  This causes the entry to be
                          activated.

                          Entries in the valid state may also be set
                          to makeCall or clearCall to make or clear
                          X.25 calls to the peer.  After such a set
                          request the entry will still be in the valid
                          state.  Setting a value of makeCall causes
                          the agent to initiate an X.25 call request
                          to the peer specified by the entry.  Setting
                          a value of clearCall causes the agent to
                          initiate clearing one X.25 call present to
                          the peer.  Each set request will initiate
                          another call or clear request (up to the
                          maximum allowed); this means that management
                          stations that fail to get a response to a
                          set request should query to see if a call
                          was in fact placed or cleared before



Throop                                                         [Page 13]

RFC 1461        Multiprotocol Interconnect on X.25 MIB          May 1993


                          retrying the request.  Entries not in the
                          valid state can not be set to makeCall or
                          clearCall.

                          The values of makeCall and clearCall provide
                          for circuit control on devices which perform
                          Ethernet Bridging using static circuit
                          assignment without address recognition;
                          other devices which dynamically place calls
                          based on destination addresses may reject
                          such requests.

                          An agent that (re)creates a new entry
                          because of a set with createRequest, should
                          also (re)create a mioxPeerEncTable entry
                          with a mioxPeerEncIndex of 1, and a
                          mioxPeerEncType of 204 (hex CC)."
                  ::= { mioxPeerEntry 2 }

          mioxPeerMaxCircuits OBJECT-TYPE
                  SYNTAX  PositiveInteger
                  ACCESS  read-write
                  STATUS    mandatory
                  DESCRIPTION
                          "The maximum number of X.25 circuits allowed
                          to this peer."
                  DEFVAL { 1 }
                  ::= { mioxPeerEntry 3 }

          mioxPeerIfIndex OBJECT-TYPE
                  SYNTAX  PositiveInteger
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "The value of the ifIndex object for the
                          interface to X.25 to use to call the peer."
                  DEFVAL { 1 }
                  ::= { mioxPeerEntry 4 }

          mioxPeerConnectSeconds OBJECT-TYPE
                  SYNTAX  Counter
                  ACCESS  read-only
                  STATUS  mandatory
                  DESCRIPTION
                          "The number of seconds a call to this peer
                          was active.  This counter will be
                          incremented by one for every second a
                          connection to a peer was open.  If two calls



Throop                                                         [Page 14]

RFC 1461        Multiprotocol Interconnect on X.25 MIB          May 1993


                          are open at the same time, one second of
                          elapsed real time will results in two
                          seconds of connect time."
                  ::= { mioxPeerEntry 5 }

          mioxPeerX25CallParamId OBJECT-TYPE
                  SYNTAX  InstancePointer
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "The instance of the index object in the
                          x25CallParmTable from RFC 1382 for the X.25
                          call parameters used to communicate with the
                          remote host.  The well known value {0 0}
                          indicates no call parameters specified."
                  DEFVAL { {0 0} }
                  ::= { mioxPeerEntry 6 }

          mioxPeerEnAddr  OBJECT-TYPE
                  SYNTAX    OCTET STRING (SIZE (0..128))
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "The Encapsulation address of the remote
                          host mapped by this table entry.  A length
                          of zero indicates the remote IP address is
                          unknown or unspecified for use as a PLE
                          default.

                          The first octet of this object contains the
                          encapsulation type, the remaining octets
                          contain an address of that type.  Thus for
                          an IP address, the length will be five
                          octets, the first octet will contain 204
                          (hex CC), and the last four octets will
                          contain the IP address.  For a snap
                          encapsulation, the first byte would be 128
                          (hex 80) and the rest of the octet string
                          would have the snap header."
                  DEFVAL { ''h }
                  ::= { mioxPeerEntry 7 }

          mioxPeerX121Address OBJECT-TYPE
                  SYNTAX  X121Address
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "The X.25 address of the remote host mapped



Throop                                                         [Page 15]

RFC 1461        Multiprotocol Interconnect on X.25 MIB          May 1993


                          by this table entry.  A zero length string
                          indicates the X.25 address is unspecified
                          for use as the PLE default."
                  DEFVAL { ''h }
                  ::= { mioxPeerEntry 8 }

          -- Systems can claim conformance to this MIB without
          -- implementing sets to mioxPeerX25CircuitId.
          -- However systems that use PVCs with RFC1356
          -- are encouraged to implement sets.
          mioxPeerX25CircuitId OBJECT-TYPE
                  SYNTAX  InstancePointer
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "This object identifies the instance of the
                          index for the X.25 circuit open to the peer
                          mapped by this table entry.  The well known
                          value {0 0} indicates no connection
                          currently active.  For multiple connections,
                          this identifies the index of a multiplexing
                          table entry for the connections.  This can
                          only be written to configure use of PVCs
                          which means the identified circuit table
                          entry for a write must be a PVC."
                  DEFVAL { {0 0} }
                  ::= { mioxPeerEntry 9 }

          mioxPeerDescr   OBJECT-TYPE
                  SYNTAX  DisplayString (SIZE (0..255))
                  ACCESS  read-write
                  STATUS  mandatory
                  DESCRIPTION
                          "This object returns any identification
                          information about the peer.  An agent may
                          supply the comment information found in the
                          configuration file entry for this peer.  A
                          zero length string indicates no information
                          available."