adpcm.2

IP网络语音通讯软件源代码. 不可多得的语音源代码

.TH ADPCM 2 "7 June 1992"
.SH NAME
adpcm - Adaptive delta compression for audio samples
.B
#include "adpcm.h"
.br
adpcm_coder(short inbuf[], char outbuf[], int nsample,
.br
	struct adpcm_state *state);
.br
adpcm_decoder(char inbuf[], short outbuf[], int nsample,
.br
	struct adpcm_state *state);
.SH DESCRIPTION
These routine convert 16 bit linear PCM samples to 4 bit ADPCM code
and vice versa. The ADPCM code used is the Intel/DVI ADPCM code which
is being recommended by the IMA Digital Audio Technical Working Group.
.PP
\fIAdpcm_coder\fP converts \fInsample\fP 16 bit samples from
\fIinbuf\fP and stores the 4 bit codes, packed two per byte, in
\fIoutbuf\fP. \fIState\fP points to a structure containing the coder
state information, a short and a char. It should be initialized to
zero before the first call. The coder updates the state record, and it
should be passed to each subsequent call.
.PP
\fIAdpcm_decoder\fP converts \fInsample\fP 4 bit codes from
\fIinbuf\fP to 16 bit samples and stores these in \fPoutbuf\fP.
\fIState\fP is a state record similar to that used by the coder.
.PP
If you compress audio to transmit it across a lossy network it is a
good idea to send the compressor state along with each packet. (This
must be the state as it was \fIbefore\fP the call to
\fIadpcm_coder\fP, not the state after the return). This state record
can then be fed to the decompressor. This way the decompressor can
tolerate packet loss.
.SH NOTES
The routines have not been tested against an official Intel/DVI coder
yet, so incompatabilities might exist.
.br
The state record is not byte-order-independent. Remember this when
transmitting it across the network.
.SH "SEE ALSO"
Proposal for Standardized Audio Interchange Formats, IMA compatability
project proceedings, Vol 2, Issue 2, May 1992.
.SH AUTHOR
Jack Jansen, CWI, Amsterdam
.br
[e-mail]