x9111控制_opt.bak

51单片机控制X9111的程序,用的是C语言,在KEIL2下运行成功,可直接调用

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,2,0,0,1,1,0,<E:\电子类\程序工程\X9111控制\STARTUP.A51><STARTUP.A51> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,132,0,0,0,162,0,0,0,70,3,0,0,246,1,0,0 }
OPTFFF 1,2,1,67108864,0,1,8,0,<.\X9111控制.c><X9111控制.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,194,2,0,0,84,1,0,0 }
OPTFFF 1,3,5,2,0,1,1,0,<.\SPI.h><SPI.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,110,0,0,0,135,0,0,0,44,3,0,0,215,1,0,0 }
OPTFFF 1,4,5,0,0,1,1,0,<.\X9111.h><X9111.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,22,0,0,0,27,0,0,0,216,2,0,0,111,1,0,0 }

ExtF <.\SPI.h> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,110,0,0,0,135,0,0,0,44,3,0,0,215,1,0,0 }
ExtF <.\X9111.h> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,22,0,0,0,27,0,0,0,216,2,0,0,111,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=33000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0851.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pAT52)(S8051.DLL)()(TP51.DLL)(-pAT52)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTDF 0x2
  OPTLE <>
  OPTLC <>
EndOpt