ram_lnk_lm3.xcl

ARM7例程程序

//*****************************************************************************
//
// standalone.xcl - Linker script for EW-ARM.
//
// Copyright (c) 2006-2007 Luminary Micro, Inc.  All rights reserved.
// 
// Software License Agreement
// 
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
// 
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws.  All rights are reserved.  You may not combine
// this software with "viral" open-source software in order to form a larger
// program.  Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
// 
// THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 1928 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************

//
// Set the CPU type to ARM.
//
-carm

//
// Define the size of flash and SRAM.
//
-DROMSTART=20000000		// 00000000-2008-3-18 8:47
-DROMEND=2000FFFF		// 0003FFFF- 0x3000-12K 24k
-DRAMSTART=20000000		//2-代表bit29＝1-RAM 0x200=512 bytes 32*3*4=0x180
-DRAMEND=2000FFFF		// 64k

//
// Define the sections to place into flash, and the order to place them.
//
-Z(CODE)INTVEC=ROMSTART-ROMEND

//-Z(CODE)INTVEC=20000000-20000100
-Z(CODE)ICODE,DIFUNCT=ROMSTART-ROMEND
-Z(CODE)CODE=ROMSTART-ROMEND
-Z(CONST)CODE_ID=ROMSTART-ROMEND
-Z(CONST)INITTAB,DATA_ID,DATA_C=ROMSTART-ROMEND
-Z(CONST)CHECKSUM=ROMSTART-ROMEND

//
// Define the sections to place into SRAM, and the order to place them.
//
-Z(DATA)VTABLE=RAMSTART-RAMEND
-Z(DATA)DATA_I,DATA_Z,DATA_N=RAMSTART-RAMEND
-Z(DATA)CODE_I=RAMSTART-RAMEND

//
//_Define	Stack and heap segment
//
-D_CSTACK_SIZE=2048
-D_HEAP_SIZE=2048

-Z(DATA)CSTACK+_CSTACK_SIZE=RAMSTART-RAMEND
-Z(DATA)HEAP+_HEAP_SIZE=RAMSTART-RAMEND