lcm1602.h.bak

CLOCK 网上看到的电子钟 源码 附图

#include <reg51.h>
#include <intrins.h> 

#define LCM_Data  P1							  
#define Busy 0x80 //用于检测LCM状态字中的Busy标识

sbit LCM_RW = P2^0; //定义引脚
sbit LCM_RS = P2^1;
sbit LCM_E = P2^2 ;

void WriteDataLCM(unsigned char WDLCM);
void WriteCommandLCM(unsigned char WCLCM,BuysC)reentrant;
//unsigned char ReadDataLCM(void);
unsigned char ReadStatusLCM(void);
void LCMInit(void);
void DisplayOneChar(unsigned char X, unsigned char Y, unsigned char  DData);
void DisplayListChar(unsigned char X, unsigned char Y, unsigned char  *DData);
void Delay5Ms(void);
void Delay400Ms(void);
//**********************************************写数据
void WriteDataLCM(unsigned char WDLCM)
{
  ReadStatusLCM(); //检测忙
  LCM_Data=WDLCM;
  LCM_RS = 1;
  LCM_RW = 0;
  LCM_E = 0; //若晶振速度太高可以在这后加小的延时
  LCM_E = 0; //延时
  LCM_E = 1;
}
//*******************************************写指令
void WriteCommandLCM(unsigned char WCLCM,BuysC)reentrant //BuysC为0时忽略忙检测
{
  if (BuysC) ReadStatusLCM(); //根据需要检测忙
  LCM_Data = WCLCM;
  LCM_RS = 0;
  LCM_RW = 0; 
  LCM_E = 0;
  LCM_E = 0;
  LCM_E = 1; 
}
/******************************************读数据	 
unsigned char ReadDataLCM(void)
{
  LCM_RS = 1; 
  LCM_RW = 1;
  LCM_E = 0;
  LCM_E = 0;
  LCM_E = 1;
  return(LCM_Data);
}
//*****************************************读状态	*/
unsigned char ReadStatusLCM(void)
{
 //LCM_Data = 0xFF; 
 LCM_RS = 0;
 LCM_RW = 1;
 LCM_E = 0;
 Delay5Ms();             //延时不够，可以再加
 LCM_E = 1;
 while (LCM_Data & Busy); //检测忙信号
 return(LCM_Data);
}

void LCMInit(void) //***************************LCM初始化
{
  LCM_Data = 0;
  WriteCommandLCM(0x38,0); //三次显示模式设置，不检测忙信号
  Delay5Ms(); 
  WriteCommandLCM(0x38,0);
  Delay5Ms(); 
  WriteCommandLCM(0x38,0);
  Delay5Ms(); 

  WriteCommandLCM(0x38,1); //显示模式设置,开始要求每次检测忙信号
  WriteCommandLCM(0x08,1); //关闭显示
  WriteCommandLCM(0x01,1); //显示清屏
  WriteCommandLCM(0x06,1); // 显示光标移动设置
  WriteCommandLCM(0x0C,1); // 显示开及光标设置
}

//**********************************************************************************按指定位置显示一个字符
void DisplayOneChar(unsigned char X, unsigned char Y, unsigned char  DData)
{
  Y &= 0x1;
  X &= 0xF; //限制X不能大于15，Y不能大于1
  if (Y) X |= 0x40; //当要显示第二行时地址码+0x40;
  X |= 0x80; //算出指令码
  WriteCommandLCM(X, 0); //这里不检测忙信号，发送地址码
  WriteDataLCM(DData);
}
//************************************************************************************按指定位置显示一串字符
void DisplayListChar(unsigned char X, unsigned char Y, unsigned char  * DData)
{
  unsigned char  ListLength;
  ListLength = 0;
  Y &= 0x1;
  X &= 0xF; //限制X不能大于15，Y不能大于1
  while (DData[ListLength]>0x20) //若到达字串尾则退出
        {
           if (X <= 0xF) //X坐标应小于0xF
              {
                DisplayOneChar(X, Y, DData[ListLength]); //显示单个字符
                ListLength++;
                X++;
               }
         }
}
//************************************************************5ms延时
void Delay5Ms(void)
{
  unsigned int TempCyc = 5552;
  while(TempCyc--);
}
//************************************************************400ms延时
void Delay400Ms(void)
{
 unsigned char TempCycA = 5;
 unsigned int TempCycB;
 while(TempCycA--)
      {
       TempCycB=7269;
       while(TempCycB--);
       }
}