cmm_sync.c

ralink最新rt3070 usb wifi 无线网卡驱动程序

			RssiOffset = pAd->ARssiOffset2;
    }
    else
    {
        if (RssiNumber == 0)
			RssiOffset = pAd->BGRssiOffset0;
		else if (RssiNumber == 1)
			RssiOffset = pAd->BGRssiOffset1;
		else
			RssiOffset = pAd->BGRssiOffset2;
    }
	
    return (-12 - RssiOffset - LNAGain - Rssi);
}

/*
	==========================================================================
	Description:
		Scan next channel
	==========================================================================
 */
VOID ScanNextChannel(
	IN PRTMP_ADAPTER pAd) 
{
	HEADER_802_11   Hdr80211;
	PUCHAR          pOutBuffer = NULL;
	NDIS_STATUS     NStatus;
	ULONG           FrameLen = 0;
	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
#ifdef CONFIG_STA_SUPPORT
	USHORT          Status;
	PHEADER_802_11  pHdr80211;
#endif // CONFIG_STA_SUPPORT //
	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;

#ifdef CONFIG_STA_SUPPORT
	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
	{
		if (MONITOR_ON(pAd))
			return;
	}
#endif // CONFIG_STA_SUPPORT //

#ifdef RALINK_ATE
	// Nothing to do in ATE mode. 
	if (ATE_ON(pAd))
		return;
#endif // RALINK_ATE //

	if (pAd->MlmeAux.Channel == 0) 
	{
		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
#ifdef CONFIG_STA_SUPPORT
			&& (INFRA_ON(pAd)
				|| (pAd->OpMode == OPMODE_AP))
#endif // CONFIG_STA_SUPPORT //
			)
		{
			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
			AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
			RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
			BBPValue &= (~0x18);
			BBPValue |= 0x10;
			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to 40MHz channel %d, Total BSS[%02d]\n",pAd->CommonCfg.CentralChannel, pAd->ScanTab.BssNr));
		}
		else
		{
			AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
			AsicLockChannel(pAd, pAd->CommonCfg.Channel);
			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
		}
		
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			//
			// To prevent data lost.
			// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
			// Now, we need to send an NULL data with turned PSM bit off to AP, when scan progress done 
			//
			if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) && (INFRA_ON(pAd)))
			{
				NStatus = MlmeAllocateMemory(pAd, (PVOID)&pOutBuffer);
				if (NStatus	== NDIS_STATUS_SUCCESS)
				{
					pHdr80211 = (PHEADER_802_11) pOutBuffer;
					MgtMacHeaderInit(pAd, pHdr80211, SUBTYPE_NULL_FUNC, 1, pAd->CommonCfg.Bssid, pAd->CommonCfg.Bssid);
					pHdr80211->Duration = 0;
					pHdr80211->FC.Type = BTYPE_DATA;
					pHdr80211->FC.PwrMgmt = (pAd->StaCfg.Psm == PWR_SAVE);

					// Send using priority queue
					MiniportMMRequest(pAd, 0, pOutBuffer, sizeof(HEADER_802_11));
					DBGPRINT(RT_DEBUG_TRACE, ("MlmeScanReqAction -- Send PSM Data frame\n"));
					MlmeFreeMemory(pAd, pOutBuffer);
					RTMPusecDelay(5000);
				}
			}

			pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
			Status = MLME_SUCCESS;
			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
		}
#endif // CONFIG_STA_SUPPORT //


		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
	} 
#ifdef RT2870
#ifdef CONFIG_STA_SUPPORT
	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
	{
		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
	}	
#endif // CONFIG_STA_SUPPORT //
#endif // RT2870 //
	else 
	{
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
		// BBP and RF are not accessible in PS mode, we has to wake them up first
		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
			AsicForceWakeup(pAd, TRUE);

			// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
			if (pAd->StaCfg.Psm == PWR_SAVE)
				MlmeSetPsmBit(pAd, PWR_ACTIVE);
		}
#endif // CONFIG_STA_SUPPORT //

		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
		AsicLockChannel(pAd, pAd->MlmeAux.Channel);

#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
		{
			if (pAd->MlmeAux.Channel > 14)
			{
				if ((pAd->CommonCfg.bIEEE80211H == 1) && RadarChannelCheck(pAd, pAd->MlmeAux.Channel))
				{
					ScanType = SCAN_PASSIVE;
					ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
				}
			}

#ifdef CARRIER_DETECTION_SUPPORT // Roger sync Carrier
			// carrier detection
			if (pAd->CommonCfg.CarrierDetect.Enable == TRUE)
			{
				ScanType = SCAN_PASSIVE;
				ScanTimeIn5gChannel = MIN_CHANNEL_TIME;
			}
#endif // CARRIER_DETECTION_SUPPORT // 
		}

#endif // CONFIG_STA_SUPPORT //

		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
		{
			ScanType = SCAN_PASSIVE;
		}

		// We need to shorten active scan time in order for WZC connect issue
		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
		if (ScanType == FAST_SCAN_ACTIVE)
			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
#ifdef CONFIG_STA_SUPPORT
		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
				(ScanType == SCAN_CISCO_PASSIVE) ||
				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
				(ScanType == SCAN_CISCO_NOISE)) && (pAd->OpMode == OPMODE_STA))
		{
			if (pAd->StaCfg.CCXScanTime < 25)
				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime * 2);
			else
				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
		}
#endif // CONFIG_STA_SUPPORT //
		else // must be SCAN_PASSIVE or SCAN_ACTIVE
		{
			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) 
#ifdef DOT11_N_SUPPORT
				|| (pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED)
#endif // DOT11_N_SUPPORT //
			)
			{
				if (pAd->MlmeAux.Channel > 14)
					RTMPSetTimer(&pAd->MlmeAux.ScanTimer, ScanTimeIn5gChannel);
				else	
				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MIN_CHANNEL_TIME);
			}
			else
				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MAX_CHANNEL_TIME);
		}

		if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE) ||
			(ScanType == SCAN_CISCO_ACTIVE))
		{
			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
			if (NStatus != NDIS_STATUS_SUCCESS)
			{
				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
#ifdef CONFIG_STA_SUPPORT
				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
				{
					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
					Status = MLME_FAIL_NO_RESOURCE;
					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
				}
#endif // CONFIG_STA_SUPPORT //

				return;
			}

			// There is no need to send broadcast probe request if active scan is in effect.
			if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE)
				)
				SsidLen = pAd->MlmeAux.SsidLen;
			else
				SsidLen = 0;

			MgtMacHeaderInit(pAd, &Hdr80211, SUBTYPE_PROBE_REQ, 0, BROADCAST_ADDR, BROADCAST_ADDR);
			MakeOutgoingFrame(pOutBuffer,               &FrameLen,
							  sizeof(HEADER_802_11),    &Hdr80211,
							  1,                        &SsidIe,
							  1,                        &SsidLen,
							  SsidLen,			        pAd->MlmeAux.Ssid,
							  1,                        &SupRateIe,
							  1,                        &pAd->CommonCfg.SupRateLen,
							  pAd->CommonCfg.SupRateLen,  pAd->CommonCfg.SupRate, 
							  END_OF_ARGS);

			if (pAd->CommonCfg.ExtRateLen)
			{
				ULONG Tmp;
				MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
								  1,                                &ExtRateIe,
								  1,                                &pAd->CommonCfg.ExtRateLen,
								  pAd->CommonCfg.ExtRateLen,          pAd->CommonCfg.ExtRate, 
								  END_OF_ARGS);
				FrameLen += Tmp;
			}

#ifdef DOT11_N_SUPPORT
			if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
			{
				ULONG	Tmp;
				UCHAR	HtLen;
				UCHAR	BROADCOM[4] = {0x0, 0x90, 0x4c, 0x33};
#ifdef RT_BIG_ENDIAN
				HT_CAPABILITY_IE HtCapabilityTmp;
#endif
				if (pAd->bBroadComHT == TRUE)
				{
					HtLen = pAd->MlmeAux.HtCapabilityLen + 4;
#ifdef RT_BIG_ENDIAN
					NdisMoveMemory(&HtCapabilityTmp, &pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));

					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
									1,                                &WpaIe,
									1,                                &HtLen,
									4,                                &BROADCOM[0],
									pAd->MlmeAux.HtCapabilityLen,     &HtCapabilityTmp, 
									END_OF_ARGS);
#else
					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
									1,                                &WpaIe,
									1,                                &HtLen,
									4,                                &BROADCOM[0],
									pAd->MlmeAux.HtCapabilityLen,     &pAd->MlmeAux.HtCapability, 
									END_OF_ARGS);
#endif // RT_BIG_ENDIAN //
				}
				else				
				{
					HtLen = pAd->MlmeAux.HtCapabilityLen;
#ifdef RT_BIG_ENDIAN
					NdisMoveMemory(&HtCapabilityTmp, &pAd->CommonCfg.HtCapability, SIZE_HT_CAP_IE);
					*(USHORT *)(&HtCapabilityTmp.HtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.HtCapInfo));
					*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo) = SWAP16(*(USHORT *)(&HtCapabilityTmp.ExtHtCapInfo));

					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
									1,                                &HtCapIe,
									1,                                &HtLen,
									HtLen,                            &HtCapabilityTmp, 
									END_OF_ARGS);
#else
					MakeOutgoingFrame(pOutBuffer + FrameLen,          &Tmp,
									1,                                &HtCapIe,
									1,                                &HtLen,
									HtLen,                            &pAd->CommonCfg.HtCapability, 
									END_OF_ARGS);
#endif // RT_BIG_ENDIAN //
				}
				FrameLen += Tmp;

#ifdef DOT11N_DRAFT3
				if (pAd->CommonCfg.BACapability.field.b2040CoexistScanSup == 1)
				{
					ULONG		Tmp;
					HtLen = 1;
					MakeOutgoingFrame(pOutBuffer + FrameLen,            &Tmp,
									  1,					&ExtHtCapIe,
									  1,					&HtLen,
									  1,          			&pAd->CommonCfg.BSSCoexist2040.word, 
									  END_OF_ARGS);

					FrameLen += Tmp;
				}
#endif // DOT11N_DRAFT3 //
			}
#endif // DOT11_N_SUPPORT //


			MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
			MlmeFreeMemory(pAd, pOutBuffer);
		}

		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
		
#ifdef CONFIG_STA_SUPPORT
		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
#endif // CONFIG_STA_SUPPORT //

	}
}

VOID MgtProbReqMacHeaderInit(
	IN	PRTMP_ADAPTER	pAd, 
	IN OUT PHEADER_802_11 pHdr80211, 
	IN UCHAR SubType, 
	IN UCHAR ToDs, 
	IN PUCHAR pDA, 
	IN PUCHAR pBssid) 
{
	NdisZeroMemory(pHdr80211, sizeof(HEADER_802_11));
	
	pHdr80211->FC.Type = BTYPE_MGMT;
	pHdr80211->FC.SubType = SubType;
	if (SubType == SUBTYPE_ACK)
		pHdr80211->FC.Type = BTYPE_CNTL;
	pHdr80211->FC.ToDs = ToDs;
	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
	COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
}