e-try.sim.qmsg

频率计编程 看看吧第一次先贴希望对大家有用

{ "Warning" "WSIM_NO_INAME_FOR_CHANNEL" "FLASH_D\[1\] " "Warning: Ignored node in vector source file. Can't find corresponding node name \"FLASH_D\[1\]\" in design." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "FLASH_D\[1\]" "0 ps" "0 ps" "" } }  } 0 0 "Ignored node in vector source file. Can't find corresponding node name \"%1!s!\" in design." 0 0}
{ "Warning" "WSIM_NO_INAME_FOR_CHANNEL" "FLASH_D\[0\] " "Warning: Ignored node in vector source file. Can't find corresponding node name \"FLASH_D\[0\]\" in design." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "FLASH_D\[0\]" "0 ps" "0 ps" "" } }  } 0 0 "Ignored node in vector source file. Can't find corresponding node name \"%1!s!\" in design." 0 0}
{ "Warning" "WSIM_NO_INAME_FOR_CHANNEL" "AD_RD " "Warning: Ignored node in vector source file. Can't find corresponding node name \"AD_RD\" in design." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "AD_RD" "0 ps" "0 ps" "" } }  } 0 0 "Ignored node in vector source file. Can't find corresponding node name \"%1!s!\" in design." 0 0}
{ "Warning" "WSIM_NO_INAME_FOR_CHANNEL" "AD_WR " "Warning: Ignored node in vector source file. Can't find corresponding node name \"AD_WR\" in design." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "AD_WR" "0 ps" "0 ps" "" } }  } 0 0 "Ignored node in vector source file. Can't find corresponding node name \"%1!s!\" in design." 0 0}
{ "Warning" "WSIM_NO_OTERM_FOR_CHANNEL" "FLASH_A\[2\] " "Warning: Compiler packed, optimized or synthesized away node \"FLASH_A\[2\]\". Ignored vector source file node." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "FLASH_A\[2\]" "0 ps" "0 ps" "" } }  } 0 0 "Compiler packed, optimized or synthesized away node \"%1!s!\". Ignored vector source file node." 0 0}
{ "Warning" "WSIM_NO_OTERM_FOR_CHANNEL" "FLASH_A\[1\] " "Warning: Compiler packed, optimized or synthesized away node \"FLASH_A\[1\]\". Ignored vector source file node." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "FLASH_A\[1\]" "0 ps" "0 ps" "" } }  } 0 0 "Compiler packed, optimized or synthesized away node \"%1!s!\". Ignored vector source file node." 0 0}
{ "Warning" "WSIM_NO_OTERM_FOR_CHANNEL" "FLASH_A\[0\] " "Warning: Compiler packed, optimized or synthesized away node \"FLASH_A\[0\]\". Ignored vector source file node." {  } { { "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "" { Waveform "C:/Users/wear/Desktop/E-TRY(frequency)/E-TRY.vwf" "FLASH_A\[0\]" "0 ps" "0 ps" "" } }  } 0 0 "Compiler packed, optimized or synthesized away node \"%1!s!\". Ignored vector source file node." 0 0}
{ "Warning" "WSIM_NO_CHANNEL_FOUND" "\|E-TRY\|tclk " "Warning: Can't find signal in vector source file for input pin \"\|E-TRY\|tclk\"" {  } {  } 0 0 "Can't find signal in vector source file for input pin \"%1!s!\"" 0 0}
{ "Warning" "WSIM_NO_CHANNEL_FOUND" "\|E-TRY\|KEY7279 " "Warning: Can't find signal in vector source file for input pin \"\|E-TRY\|KEY7279\"" {  } {  } 0 0 "Can't find signal in vector source file for input pin \"%1!s!\"" 0 0}
{ "Warning" "WSIM_NO_CHANNEL_FOUND" "\|E-TRY\|DAT7279 " "Warning: Can't find signal in vector source file for input pin \"\|E-TRY\|DAT7279\"" {  } {  } 0 0 "Can't find signal in vector source file for input pin \"%1!s!\"" 0 0}
{ "Info" "IEDS_MAX_TRANSITION_COUNT" "" "Info: Option to preserve fewer signal transitions to reduce memory requirements is enabled" { { "Info" "IEDS_MAX_TRANSITION_COUNT_EXP" "" "Info: Simulation has been partitioned into sub-simulations according to the maximum transition count determined by the engine. Transitions from memory will be flushed out to disk at the end of each sub-simulation to reduce memory requirements." {  } {  } 0 0 "Simulation has been partitioned into sub-simulations according to the maximum transition count determined by the engine. Transitions from memory will be flushed out to disk at the end of each sub-simulation to reduce memory requirements." 0 0}  } {  } 0 0 "Option to preserve fewer signal transitions to reduce memory requirements is enabled" 0 0}
{ "Warning" "WSDB_TRI_BUS_CONTENTION" "32.02 us \|E-TRY\|DAT7279 " "Warning: Found logic contention at time 32.02 us on bus node \"\|E-TRY\|DAT7279\"" { { "Info" "ISDB_NODE_VALUE" "DAT7279~output 0 " "Info: Node \"DAT7279~output\" has logic level of 0" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0} { "Info" "ISDB_NODE_VALUE" "DAT7279 X " "Info: Node \"DAT7279\" has logic level of X" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0}  } {  } 0 0 "Found logic contention at time %1!s! on bus node \"%2!s!\"" 0 0}
{ "Warning" "WSDB_TRI_BUS_CONTENTION" "48.02 us \|E-TRY\|DAT7279 " "Warning: Found logic contention at time 48.02 us on bus node \"\|E-TRY\|DAT7279\"" { { "Info" "ISDB_NODE_VALUE" "DAT7279~output 1 " "Info: Node \"DAT7279~output\" has logic level of 1" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0} { "Info" "ISDB_NODE_VALUE" "DAT7279 X " "Info: Node \"DAT7279\" has logic level of X" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0}  } {  } 0 0 "Found logic contention at time %1!s! on bus node \"%2!s!\"" 0 0}
{ "Warning" "WSDB_TRI_BUS_CONTENTION" "56.02 us \|E-TRY\|DAT7279 " "Warning: Found logic contention at time 56.02 us on bus node \"\|E-TRY\|DAT7279\"" { { "Info" "ISDB_NODE_VALUE" "DAT7279~output 0 " "Info: Node \"DAT7279~output\" has logic level of 0" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0} { "Info" "ISDB_NODE_VALUE" "DAT7279 X " "Info: Node \"DAT7279\" has logic level of X" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0}  } {  } 0 0 "Found logic contention at time %1!s! on bus node \"%2!s!\"" 0 0}
{ "Warning" "WSDB_TRI_BUS_CONTENTION" "72.02 us \|E-TRY\|DAT7279 " "Warning: Found logic contention at time 72.02 us on bus node \"\|E-TRY\|DAT7279\"" { { "Info" "ISDB_NODE_VALUE" "DAT7279~output 0 " "Info: Node \"DAT7279~output\" has logic level of 0" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0} { "Info" "ISDB_NODE_VALUE" "DAT7279 X " "Info: Node \"DAT7279\" has logic level of X" {  } {  } 0 0 "Node \"%1!s!\" has logic level of %2!s!" 0 0}  } {  } 0 0 "Found logic contention at time %1!s! on bus node \"%2!s!\"" 0 0}
{ "Info" "IEDS_SUB_SIMULATION_COUNT" "1 " "Info: Simulation partitioned into 1 sub-simulations" {  } {  } 0 0 "Simulation partitioned into %1!d! sub-simulations" 0 0}
{ "Info" "ISIM_SIM_SIMULATION_COVERAGE" "     43.78 % " "Info: Simulation coverage is      43.78 %" {  } {  } 0 0 "Simulation coverage is %1!s!" 0 0}
{ "Info" "ISIM_SIM_NUMBER_OF_TRANSITION" "24278725 " "Info: Number of transitions in simulation is 24278725" {  } {  } 0 0 "Number of transitions in simulation is %1!s!" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Simulator 0 s 31 s Quartus II " "Info: Quartus II Simulator was successful. 0 errors, 31 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Fri May 23 22:52:06 2008 " "Info: Processing ended: Fri May 23 22:52:06 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:09:20 " "Info: Elapsed time: 00:09:20" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}