t_cv.cpp

MTK 手机软件开发 META 源代码,开发环境: C++ Builder

/*****************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2005
*
*  BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
*  THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE")
*  RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON
*  AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES,
*  EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
*  MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT.
*  NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE
*  SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR
*  SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH
*  THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO
*  NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S
*  SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM.
*
*  BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE
*  LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE,
*  AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE,
*  OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO
*  MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE.
*
*  THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE
*  WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF
*  LAWS PRINCIPLES.  ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND
*  RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER
*  THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC).
*
*****************************************************************************/
/*****************************************************************************
 *
 * Filename:
 * ---------
 *   T_CV.cpp
 *
 * Project:
 * --------
 *   Maui META APP
 *
 * Description:
 * ------------
 *  Constant voltage (CV) calibraiton source
 *
 * Author:
 * -------
 *  Andy Ueng (mtk00490)
 *
 *============================================================================
 *             HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 * $Revision$
 * $Modtime$
 * $Log$
 * 
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *============================================================================
****************************************************************************/


#pragma hdrstop

#ifndef _META_FACTORY_H_
#include "meta_factory.h"
#endif

#ifndef _T_META_FACTORY_CALIBRATION_H_
#include  "T_META_factory_calibration.H"
#endif

#ifndef  _META_UTILS_H_
#include "meta_utils.h"
#endif

#ifndef  _RCT_COMMON_H_
#include "rct_common.h"
#endif

// misc
#ifndef  _TIME_UTILS_H_
#include "time_utils.h"
#endif

#ifndef  _FT_UTILS_H_
#include "ft_utils.h"
#endif

// callback
#ifndef _META_FACTORY_BB_CB_H_
#include "meta_factory_bb_cb.h"
#endif

extern bool  is_suspend_cal;
//===========================================================================
bool __fastcall T_META_factory_calibration::CVCal_cal(void)
{
    log->Add("\n" +DateToStr(Date()) +  " " + CurrentTimeStr() +
              " ====================== CV calibration begin ===================== "
           );

    PostMessage(ctrl.hPostMsgDestHandle,
                WM_MF_CV_BEGIN,
                0,
                0
                );
                
    if (!m_dcs_ctrl.DCS_Init(m_pDcs))
    {
        CalErrorHandler(WM_MF_ADC_DCS_INIT_FAIL);
        log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() + " FAIL: Power supply initialize ");
        return false;
    }

    // set output voltage = 4.2V
    if (!m_dcs_ctrl.DCS_outputVoltCurr( m_pDcs, 4.2, i_CURRENT_LIMIT/1000.0))
    {
        CalErrorHandler(WM_MF_ADC_DCS_SET_VOLTAGE_CURRENT_FAIL );
        log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() + " FAIL: power supply set vlotage = " +
                 Double_To_AnsiString(i_ADC_V1/1000.0)
                 );
        return false;
    }

    log->Add( DateToStr(Date()) +  " " + CurrentTimeStr() + " Set power supply vlotage = " +
                  Double_To_AnsiString(4.2)
                            );
    CHECK_TERMINATE_BY_USER

    Sleep (50);

    // set CV calibration register
    m_cBB_CV_Obj.ConfirmCallback = ::CNF_BB;
    m_cBB_CV_Obj.REQ_Set_CV_Cal_Register_Start(m_pCal->e_bb_chip);

    RestartTimerCal(WM_MF_BB_REG_SET_FAIL);
    SUSPEND_CAL_THREAD

    E_METAAPP_RESULT_T state = m_cBB_CV_Obj.Get_ConfirmState();
    if (state != METAAPP_SUCCESS)
    {
        CalErrorHandler(WM_MF_BB_REG_SET_FAIL);
        log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() +
                     " FAIL : Target < set CV calibration register fail "
                    );
        return false;
    }

    char c_pmu  = m_cBB_CV_Obj.Get_PMU();
    char c_step = m_cBB_CV_Obj.Get_CvStep();

    log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() +
                     " PMU = " + IntToStr(c_pmu) +
                     ", step = " + IntToStr(c_step)
                    );

    CHECK_TERMINATE_BY_USER

    // write NVRAM
    m_cBB_CV_Obj.ConfirmCallback = ::CNF_BB;
    m_cBB_CV_Obj.REQ_Write_To_NVRAM_Start();

    RestartTimerCal(WM_MF_NVRAM_CV_WRITE_FAIL);
    SUSPEND_CAL_THREAD

    state = m_cBB_CV_Obj.Get_ConfirmState();
    if (state != METAAPP_SUCCESS)
    {
        CalErrorHandler(WM_MF_NVRAM_CV_WRITE_FAIL);
        log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() +
                     " FAIL : Target < set CV calibration register fail "
                    );
        return false;
    }

    log->Add("\n" +DateToStr(Date()) +  " " + CurrentTimeStr() +
              " ======================  CV calibration end  ===================== "
           );
    return true;
}

//---------------------------------------------------------------------------
bool __fastcall T_META_factory_calibration::CVCal_check(void)
{
    log->Add("\n" +DateToStr(Date()) +  " " + CurrentTimeStr() +
              " ======================   CV check begin   ===================== "
           );
    char step = m_cBB_CV_Obj.Get_CvStep();
    if ((step > m_cMAX_CV_STEP) || (step < m_cMIN_CV_STEP))
    {
        CalErrorHandler(WM_MF_CV_CHECK_FAIL);
        log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() +
                  " Fail: CV check ." + " CV step = " + IntToStr(step) +
                  ", min CV step = " + IntToStr(m_cMIN_CV_STEP) +
                  ", max CV step = " + IntToStr(m_cMAX_CV_STEP)
                );
        return false;
    }

    log->Add(DateToStr(Date()) +  " " + CurrentTimeStr() +
                  " Pass: CV check ." + " CV step = " + IntToStr(step) +
                  ", min CV step = " + IntToStr(m_cMIN_CV_STEP) +
                  ", max CV step = " + IntToStr(m_cMAX_CV_STEP)
                );
    PostMessage(
                     ctrl.hPostMsgDestHandle,
                     WM_MF_CV_CALIBRATION_DONE,
                     0,
                     0
                    );
    frmFatcory->DisableAllCalTimer();
    log->Add("\n" +DateToStr(Date()) +  " " + CurrentTimeStr() +
              " ======================    CV check end    ===================== "
           );
    return true;
}