initializecodeparam.m

1、HSDPA； 2、LTE； 3、turbo code； 4、Mobile WiMAX； 5、LDPC

function [sim_param, code_param] = InitializeCodeParam( sim_param, cml_home )
% InitializeCodeParam sets up the code_param structure, which contains
% information derived from the sim_param structure.
%
% The calling syntax is:
%     code_param = InitializeCodeParam( sim_param )
%
%     sim_param = A structure containing simulation parameters. (input and output)
%     code_param = A structure contining derived information.
%
%     cml_home = location of cml_home directory
%
%     Note: See readme.txt for a description of the structure formats.
%
% Copyright (C) 2006-2008, Matthew C. Valenti
%
% Last updated on May 3, 2008
%
% Function InitializeCodeParam is part of the Iterative Solutions Coded Modulation
% Library (ISCML).  
%
% The Iterative Solutions Coded Modulation Library is free software;
% you can redistribute it and/or modify it under the terms of 
% the GNU Lesser General Public License as published by the 
% Free Software Foundation; either version 2.1 of the License, 
% or (at your option) any later version.
%
% This library is distributed in the hope that it will be useful,
% but WITHOUT ANY WARRANTY; without even the implied warranty of
% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
% Lesser General Public License for more details.
%
% You should have received a copy of the GNU Lesser General Public
% License along with this library; if not, write to the Free Software
% Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

% initialize code

% Initialize code_param (in case it does not get defined)
% Fixed 12/7/07
if length( sim_param.rate )
    code_param.rate = sim_param.rate;
else
    code_param.rate = [];
end

% derive the modulation parameters.
if ( ( strcmp( sim_param.sim_type, 'coded' ) )||( strcmp( sim_param.sim_type, 'uncoded' ) )...
        ||( strcmp( sim_param.sim_type, 'capacity' ) )||(strcmpi( sim_param.sim_type, 'bloutage' ) ) )
    code_param.bits_per_symbol = log2(sim_param.mod_order);    
    
    % bpsk is a special case (runs faster that way)
    code_param.bpsk = 0;
    code_param.fsk = 0;
    if ( strcmpi( sim_param.modulation, 'custom' ) )
        % custom modulation.  Read in S directly from scenario file
        code_param.S_matrix = sim_param.S_matrix;
        
    elseif( sim_param.code_configuration == 3 )
        % HSDPA
        code_param.S_matrix = CreateConstellation( 'HSDPA', sim_param.mod_order );       
    elseif ( strcmpi( sim_param.modulation, 'FSK' ) )
        code_param.fsk = 1;
        if (length( sim_param.h )==0)
            sim_param.h = 1;
        end
        
        if ( length( sim_param.mapping ) == 0)
            sim_param.mapping = 'natural';
        end

        [code_param.S_matrix, code_param.mapping] = CreateConstellation( 'FSK', sim_param.mod_order, sim_param.mapping, sim_param.h );
        
        % Determine noise correlation
        if ( sim_param.h == 1 )
            code_param.fil_noise = eye( sim_param.mod_order );
        else
            % the correlation does not depend on mapping.
            for m = 1:sim_param.mod_order
                for n = 1:sim_param.mod_order
                    R(n,m) = sinc((m-n)*sim_param.h)* exp(-j*pi*(m-n)*sim_param.h);
                end
            end            

            [U,Delta,V] = svd(R);
            fil_noise = U*diag( diag(Delta).^0.5);
            T = abs( fil_noise*fil_noise' - R);
            if ( max(max(T)) > 1E-10)
                disp('wrong fil_noise matrix');
            end
            code_param.fil_noise = fil_noise;            

        end
    elseif ( strcmpi( sim_param.modulation, 'bpsk' ) )
        code_param.bpsk = 1;
        code_param.S_matrix = [1 -1];            
    else
        % Not bpsk or HSDPA, so generate the S_matrix 
        code_param.S_matrix = CreateConstellation( sim_param.modulation, sim_param.mod_order, sim_param.mapping );
    end    
end

% if iterative, need to determine number of iterations
% this has a distinct purpose from max_iterations, as the simulator will
% adjust to make smaller when appropriate
if ( length(sim_param.max_iterations) )
    code_param.max_iterations = sim_param.max_iterations;
else
    code_param.max_iterations = 1;
end

% defaults
code_param.coded = 0;
code_param.outage = 0;

% derive the code parameters.
if strcmp( sim_param.sim_type, 'coded' )
    code_param.coded = 1;
    switch sim_param.code_configuration
        case {1} % PCCC            
            % create the channel interleaver
            code_param.code_interleaver = eval( sim_param.code_interleaver );
            code_param.data_bits_per_frame = length( code_param.code_interleaver );

            % determine the puncturing pattern
            if ( length (sim_param.pun_pattern1 ) )
                % use the pattern in the scenario file
                code_param.pun_pattern = [sim_param.pun_pattern1
                    sim_param.pun_pattern2];
                code_param.tail_pattern = [sim_param.tail_pattern1
                    sim_param.tail_pattern2];
            else
                % puncture pattern not defined, so use default
                [N1,K1] = size( sim_param.g1 );
                [N2,K2] = size( sim_param.g2 );
                code_param.tail_pattern = ones(N1+N2,K1-1); % send all tail bits once, as in UMTS
                code_param.pun_pattern = ones(N1+N2,1);
                code_param.pun_pattern(N1+1,1) = 0; % don't send lower systematic
            end
        case {2} % LDPC            
            % Find H_rows and H_cols
            [code_param.H_rows, code_param.H_cols, code_param.P_matrix ] = eval( sim_param.parity_check_matrix );
            code_param.data_bits_per_frame = length(code_param.H_cols) - length( code_param.P_matrix );
        case {3} % HSDPA      
            % derived constants
            K_crc = sim_param.framesize + 24; % add CRC bits

            % see if there needs to be more than one block
            code_param.number_codewords = ceil( K_crc/5114 ); % number of blocks
            data_bits_per_block = ceil( K_crc/code_param.number_codewords ); % length of each block
            code_param.data_bits_per_frame = code_param.number_codewords*data_bits_per_block; % includes the filler bits, if any

            code_param.code_interleaver = eval( strcat( 'CreateUmtsInterleaver(', int2str( data_bits_per_block ), ')' ) );

            if ( sim_param.mod_order == 4 )
                % QPSK
                code_param.modulation = 0;
                code_param.U = 960;
                % sim_param.modulation = 'HSDPA';
            else
                % 16-QAM
                code_param.modulation = 1;
                code_param.U = 1920;
                % sim_param.modulation = 'HSDPA';
            end
            code_param.N_data = code_param.U*sim_param.P;
            code_param.N_TTI = 3*data_bits_per_block + 12;

            % Puncturing pattern
            code_param.pun_pattern = [1 1 0 1]';

            % tail pattern
            code_param.tail_pattern = ones(4,3);

            % generators
            sim_param.g1 = [1 0 1 1
                1 1 0 1];
            sim_param.g2 = sim_param.g1;
            sim_param.nsc_flag1 = 0;
            sim_param.nsc_flag2 = 0;
        case {4} % UMTS Turbo code            
            % generator polynomials for UMTS
            sim_param.g1 = [1 0 1 1
                1 1 0 1];
            sim_param.g2 = sim_param.g1;
            sim_param.nsc_flag1 = 0;
            sim_param.nsc_flag2 = 0;

            % the code interleaver
            sim_param.code_interleaver = ...
                strcat( 'CreateUmtsInterleaver(', int2str(sim_param.framesize ), ')' );
            code_param.code_interleaver = eval( sim_param.code_interleaver );
            code_param.data_bits_per_frame = length( code_param.code_interleaver );

            % the puncturing pattern
            if length( sim_param.code_bits_per_frame )
                [code_param.pun_pattern, code_param.tail_pattern] = UmtsPunPattern( sim_param.framesize, sim_param.code_bits_per_frame );
            else
                code_param.pun_pattern = [1 0 1 1]';
                code_param.tail_pattern = ones(4,3);
            end
            
        case {5} % Wimax CTC code
            code_param.code_interleaver = CreateWimaxInterleaver( sim_param.framesize );
            code_param.data_bits_per_frame = sim_param.framesize;
            code_param.pun_pattern = CreateWimaxPuncturingPattern( sim_param.code_bits_per_frame );
        case {6} % DVB-RCS turbo code
            code_param.code_interleaver = CreateDvbInterleaver( sim_param.framesize );
            code_param.data_bits_per_frame = sim_param.framesize;
            code_param.pun_pattern = CreateDvbPuncturingPattern( sim_param.code_bits_per_frame, 3*sim_param.framesize );
        otherwise % convolutional (0) or BTC (7)                    
            code_param.data_bits_per_frame = sim_param.framesize;
    end   
    
    % Encode a test word in order to determine the length
    code_param.bicm_interleaver = [];
    data = zeros(1, code_param.data_bits_per_frame);
    [s, codeword] = CmlEncode( data, sim_param, code_param );
    code_param.code_bits_per_frame = length( codeword );    
    code_param.symbols_per_frame = length( s );
    
    if ( sim_param.code_configuration == 3 )
        code_param.rate = sim_param.framesize/code_param.symbols_per_frame; % HSDPA
    else
        code_param.rate = code_param.data_bits_per_frame/code_param.symbols_per_frame;
    end
    
    % check number of symbols per frame for consistency
    if ( code_param.symbols_per_frame ~= ceil( code_param.code_bits_per_frame / code_param.bits_per_symbol ) )
        error( 'Symbols per frame is inconsistent' );   
    end       
elseif ( strcmpi( sim_param.sim_type, 'uncoded' )||strcmpi( sim_param.sim_type, 'capacity' ) )
    code_param.symbols_per_frame = sim_param.framesize;   
    code_param.data_bits_per_frame = code_param.symbols_per_frame*code_param.bits_per_symbol;
    code_param.rate = code_param.data_bits_per_frame/code_param.symbols_per_frame;
elseif ( strcmpi( sim_param.sim_type, 'bloutage' ) )
    code_param.outage = 1;
    code_param.rate = sim_param.rate; % rate specified by the user.
    code_param.symbols_per_frame = ceil( sim_param.framesize/sim_param.rate );
    code_param.data_bits_per_frame = code_param.symbols_per_frame*log2(sim_param.mod_order);
end
   
% determine channel type
if (strcmpi( sim_param.channel, 'rayleigh' ) )
    code_param.channel_type = 1;
elseif (strcmpi( sim_param.channel, 'awgn' ) )    
    code_param.channel_type = 0; % AWGN
elseif (strcmpi( sim_param.channel, 'block' ) )
    if strcmp( sim_param.sim_type, 'coded' )
        code_param.channel_type = 2; % block fading
        code_param.symbols_per_block = ceil( code_param.symbols_per_frame/sim_param.blocks_per_frame );
        % bug fix below: Sept. 4, 2007
        if ( code_param.symbols_per_block*sim_param.blocks_per_frame ~= code_param.symbols_per_frame )
            error( 'There must be an integer number of blocks per frame' );
        end
    else
        error( 'block channel type is only for coded simulations' );
    end        
end   

% determine matlab version
version_text = version;
if ( str2num( version_text(1) ) > 6)
    code_param.save_flag = '-v6';
else
    code_param.save_flag = '-mat';
end

% determine where your root directory is (added 10-12-07)
code_param.filename = [cml_home sim_param.filename];

% determine where input filename is for modulation-constrained outage
% (added 12-7-07)
if (strcmpi( sim_param.sim_type, 'outage' ) )
    code_param.input_filename = [cml_home sim_param.input_filename];
end
    
% need to let sim_param know what the rate is (for proper plotting) 
sim_param.rate = code_param.rate;