mzonestart.m

OFDMA 物理层开发的matlab 源码.飞思卡尔提供.对物理层开发的工程师有帮助!

%
% FPUL Zone Start of IEEE 802.16-2005 (WiMAX, OFDMA only) 
% Input:
%       CellId             -- Cell ID 
%       FrameNr            -- Frame number
%       NFFT               -- FFT - 512 or 1024
%       NFFTUsed           -- Number of FFT carrier
%       NSubCh             -- Number of SubChannel
%       NSlotVec           -- Number of Slot vector
%       PermBase           -- Permutation Base 
%       SlotUIUC           -- UIUC per SubChannel
%       SubgroupCodeOffset -- Ranging Code Sub Group Offset
%       NMLORangCodes      -- M+N+L+O+R number of RAnging Code
% Output:
%       PNCodeLUT          -- PN Code LUT
%       TileLocationLUT    -- Tile Location LUT
%       PilotPhyLoc        -- Pilot Physical Location
%       DataPhyLoc         -- Data Physical Location
%       RangingCode        -- Ranging Code
%       SubChannelLUT      -- SubChannel LUT
% Remark:
%          
% Matlab 7 Release 14 SP2

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%  Property of Freescale
%  Freescale Confidential Proprietary
%  Freescale Copyright (C) 2006 All rights reserved
%  ----------------------------------------------------------------------------
%  $RCSfile: mZoneStart.m.rca $
%  $Revision: 1.5 $
%  $Date: Tue Oct 31 12:00:11 2006 $
%  Target: Matlab
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

%-- Matlab files used by this file
% mRangingCode
% mPRBS
%-- End of list


function [PNCodeLUT,TileLocationLUT,PilotPhyLoc,DataPhyLoc,RangingCode,SubChannelLUT]= ...
                 mZoneStart(CellId,FrameNr,NFFT,NFFTUsed,NSubCh,NSlotVec,...
                 PermBase,SlotUIUC,SubgroupCodeOffset,NMLORangCodes)


FPULNTILE = 6;
NCARRIERPERTILE = 4 * 2;

% TilePerm1024 size of 35
TilePerm1024 = [11,19,12,32,33,9,30,7,4,2,13,8,17,23,27,5,...
                15,34,22,14,21,1,0,24,3,26,29,31,20,25,16,10,6,28,18]; 
% TilePerm512 size of 17
TilePerm512 = [11,15,10,2,12,9,8,14,16,4,0,5,13,3,6,7,1];

PNCodeLUT = mPRBS(CellId,FrameNr,NFFTUsed);

%select Input Permutation sequence for given FFT size
switch(NFFT)
   case 1024 
       TilePerm = TilePerm1024;
   case 512
       TilePerm = TilePerm512;
end
   
% generate table TilePermLUT which contains the tile permutation for entire symbol
for SubCh=0:(NSubCh-1)
 for Tile=0:(FPULNTILE-1)
    TilePermLUT(SubCh+1,Tile+1) = NSubCh*Tile + mod((TilePerm(mod((Tile+SubCh),NSubCh)+1) + PermBase),NSubCh);
 end
end

% SubChannel rotation
for SlotVec=1:NSlotVec
    SubChEnum = 0;
    for SubCh=1:NSubCh
        % SubChannel rotation only if UIUC != 0,12,13,0xfe
        if ((SlotUIUC(SlotVec,SubCh) == 0) | ...
            (SlotUIUC(SlotVec,SubCh) == 12) | ...
            (SlotUIUC(SlotVec,SubCh) == 13) | ...
            (SlotUIUC(SlotVec,SubCh) == 254))
           ChannelTable(SubCh) = SubCh-1;
           SubChannelLUT(SlotVec,SubCh) = SubCh-1;
        else
           SubChEnum = SubChEnum + 1;
           ChannelRef(SubChEnum) = SubCh-1;
        end
    end
        
    for SubChEnumI=1:SubChEnum
        NewSubChNum = mod(((SubChEnumI-1)+13*(SlotVec-1)),SubChEnum)+1;
        IdxInv = ChannelRef(SubChEnumI)+1;
        ChannelTable(IdxInv) = ChannelRef(NewSubChNum);
        SubChannelLUT(SlotVec,ChannelRef(NewSubChNum)+1) = IdxInv - 1;
    end
    
    for SubCh=1:NSubCh
        SubChRot = ChannelTable(SubCh)+1;  
        for Tile=1:FPULNTILE
            TileLocationLUT(SlotVec,SubCh,Tile) = NCARRIERPERTILE * TilePermLUT(SubChRot,Tile);
        end    
    end
end

% Generate Pilot/Data Physical location vector 
for SlotVec=1:NSlotVec
    for SubCh=1:NSubCh
        PilotIndex = 1;
        DataIndex = 1;
        % First symbol
        for Tile=1:FPULNTILE
            PilotPhyLoc(SlotVec,SubCh,PilotIndex) = TileLocationLUT(SlotVec,SubCh,Tile);
            PilotIndex = PilotIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 2;
            DataIndex = DataIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 4;
            DataIndex = DataIndex + 1;
            PilotPhyLoc(SlotVec,SubCh,PilotIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 6;
            PilotIndex = PilotIndex + 1;
        end
        % Second symbol
        for Tile=1:FPULNTILE
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + NFFTUsed*2;
            DataIndex = DataIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 2 + NFFTUsed*2;
            DataIndex = DataIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 4 + NFFTUsed*2;
            DataIndex = DataIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 6 + NFFTUsed*2;
            DataIndex = DataIndex + 1;
        end
        % Third symbol
        for Tile=1:FPULNTILE
            PilotPhyLoc(SlotVec,SubCh,PilotIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + NFFTUsed*4;
            PilotIndex = PilotIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 2 + NFFTUsed*4;
            DataIndex = DataIndex + 1;
            DataPhyLoc(SlotVec,SubCh,DataIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 4 + NFFTUsed*4;
            DataIndex = DataIndex + 1;
            PilotPhyLoc(SlotVec,SubCh,PilotIndex) = TileLocationLUT(SlotVec,SubCh,Tile) + 6 + NFFTUsed*4;
            PilotIndex = PilotIndex + 1;
        end
    end
end

RangingCode = mRangingCode(PermBase,SubgroupCodeOffset,NMLORangCodes);