hmican_usbdlg.cpp

面板显示程序

	
	theApp.almlist[16] = "encoder TDC error";
	theApp.almlist[17] = "encoder angle error";
	theApp.almlist[18] = "pick 1# failure";
	theApp.almlist[19] = "pick 2# failure";
	theApp.almlist[20] = "index failure";
	theApp.almlist[21] = "oil pressure low";
	theApp.almlist[22] = "oil pressure error";
	theApp.almlist[23] = "oil temprature sensor low";
	theApp.almlist[24] = "oil temprature sensor high";
	theApp.almlist[25] = "oil temprature sensor error";
	theApp.almlist[26] = "ACU alive signal abnormal";
	theApp.almlist[27] = "BCU alive signal abnormal";
	theApp.ACUisMain = false;
	for(int i=0;i<16;i++)
	{
		theApp.preJet[i] = 0;
		theApp.preJetB[i] = 0;
		theApp.dire[i] = false;
		theApp.direB[i] = false;
		theApp.delayRev[i] = 0;
		theApp.delayRevB[i] = 0;
		theApp.IsStart[i] = false;
		theApp.IsNormal[i] = false;
		theApp.IsBig[i] = false;
	}
		
	//////////acu
	
	theApp.luboiltemp = 0;
	theApp.luboiltempalmh = 0;
	theApp.luboiltempalml = 0;
	theApp.pressure = 0.0;
	theApp.sulfur = 0.0;

	theApp.tempcurRev = 0.0;
	theApp.tempaRev=0.0;
	theApp.tempbRev=0.0;
	theApp.loadcurRev=0.0;
	theApp.loadaRev=0.0;
	theApp.loadbRev=0.0;

	theApp.InOilAllCount = 0;           
	/////////////bcu
	
	theApp.luboiltempB = 0;
	theApp.luboiltempalmhB = 0;
	theApp.luboiltempalmlB = 0;
	theApp.pressureB = 0.0;
	theApp.sulfurB = 0.0;

	theApp.tempcurRevB = 0.0;
	theApp.tempaRevB=0.0;
	theApp.tempbRevB=0.0;
	theApp.loadcurRevB=0.0;
	theApp.loadaRevB=0.0;
	theApp.loadbRevB=0.0;

	if(theApp.m_connect==1)
	{
		theApp.m_connect=0;
		Sleep(500);
		VCI_CloseDevice(theApp.m_devtype,theApp.m_devind);
		return TRUE;
	}

	VCI_INIT_CONFIG init_config;
	int index_deng,filtertype,mode,cannum;
	CString strcode,strmask,strtiming0,strtiming1,strtmp;
	char szcode[20],szmask[20],sztiming0[20],sztiming1[20];
	unsigned char sztmp[4];
	DWORD code,mask,timing0,timing1;
	

	index_deng=0;//设备索引号0
	filtertype=0;//双滤波0
	mode=0;//正常模式0
	cannum=0;//第几路CAN0
	strcode="00000000";//验收码00000000
	strmask="ffffffff";//屏蔽码ffffffff
	strtiming0="03";//定时器0
	strtiming1="1c";//定时器1

	
	strtmp=strcode;
	strcode.Format("%08s",strtmp);
	strtmp=strmask;
	strmask.Format("%08s",strtmp);
	strtmp=strtiming0;
	strtiming0.Format("%02s",strtmp);
	strtmp=strtiming1;
	strtiming1.Format("%02s",strtmp);
	
	strcpy(szcode,(LPCTSTR)strcode);
	strcpy(szmask,(LPCTSTR)strmask);
	strcpy(sztiming0,(LPCTSTR)strtiming0);
	strcpy(sztiming1,(LPCTSTR)strtiming1);
	
	if(theApp.strtodata((unsigned char*)szcode,sztmp,4,0)!=0)
	{
		MessageBox("验收码数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}
	code=(((DWORD)sztmp[0])<<24)+(((DWORD)sztmp[1])<<16)+(((DWORD)sztmp[2])<<8)+
		((DWORD)sztmp[3]);
	
	if(theApp.strtodata((unsigned char*)szmask,sztmp,4,0)!=0)
	{
		MessageBox("屏蔽码数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}
	mask=(((DWORD)sztmp[0])<<24)+(((DWORD)sztmp[1])<<16)+(((DWORD)sztmp[2])<<8)+
		((DWORD)sztmp[3]);
	
	if(theApp.strtodata((unsigned char*)sztiming0,sztmp,1,0)!=0)
	{
		MessageBox("定时器0数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}
	timing0=((DWORD)sztmp[0]);
	
	if(theApp.strtodata((unsigned char*)sztiming1,sztmp,1,0)!=0)
	{
		MessageBox("定时器1数据格式不对!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}
	timing1=((DWORD)sztmp[0]);
	
	init_config.AccCode=code;
	init_config.AccMask=mask;
	init_config.Filter=filtertype;
	init_config.Mode=mode;
	init_config.Timing0=timing0;
    init_config.Timing1=timing1;
	
	if(VCI_OpenDevice(theApp.m_devtype,index_deng,0)!=STATUS_OK)
	{
		MessageBox("打开设备失败!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}
	if(VCI_InitCAN(theApp.m_devtype,index_deng,cannum,&init_config)!=STATUS_OK)
	{
		MessageBox("初始化CAN失败!","警告",MB_OK|MB_ICONQUESTION);
		VCI_CloseDevice(theApp.m_devtype,index_deng);
		return TRUE;
	}
	theApp.m_connect=1;
	theApp.m_devind=index_deng;
	theApp.m_cannum=cannum;
	
	AfxBeginThread(ReceiveThread,this);
	
	if(theApp.m_connect==0)
		return TRUE;
	if(VCI_StartCAN(theApp.m_devtype,theApp.m_devind,theApp.m_cannum)==1)
	{
				
	}
	else
	{
		MessageBox("启动失败!","警告",MB_OK|MB_ICONQUESTION);
		return TRUE;
	}	
		

	//判断是否所有数据全部收到
    
//	for(int m=0;m<10;m++)
//	{
//		GetInfo[m] = false;
//	}
//	GetAll = false;
/*	COPLSetDlg dlg;
	//dlg.DoModal();    //启动对话框等待
	while(!GetAll)
	{
		bool fir = GetInfo[0];
		for(int i=1;i<10;i++)
		{
			fir = GetInfo[i] && fir;
		}	
		GetAll = fir;
	}
	 //正常启动 启动对话框关闭
	 */

	return TRUE;  // return TRUE  unless you set the focus to a control
}

void CHMIcan_usbDlg::OnSysCommand(UINT nID, LPARAM lParam)
{
	if ((nID & 0xFFF0) == IDM_ABOUTBOX)
	{
		CAboutDlg dlgAbout;
		dlgAbout.DoModal();
	}
	else
	{
		CDialog::OnSysCommand(nID, lParam);
	}
}

// If you add a minimize button to your dialog, you will need the code below
//  to draw the icon.  For MFC applications using the document/view model,
//  this is automatically done for you by the framework.

void CHMIcan_usbDlg::OnPaint() 
{
	if (IsIconic())
	{
		CPaintDC dc(this); // device context for painting

		SendMessage(WM_ICONERASEBKGND, (WPARAM) dc.GetSafeHdc(), 0);

		// Center icon in client rectangle
		int cxIcon = GetSystemMetrics(SM_CXICON);
		int cyIcon = GetSystemMetrics(SM_CYICON);
		CRect rect;
		GetClientRect(&rect);
		int x = (rect.Width() - cxIcon + 1) / 2;
		int y = (rect.Height() - cyIcon + 1) / 2;

		// Draw the icon
		dc.DrawIcon(x, y, m_hIcon);
	}
	else
	{
		CDialog::OnPaint();
	}
}

// The system calls this to obtain the cursor to display while the user drags
//  the minimized window.
HCURSOR CHMIcan_usbDlg::OnQueryDragIcon()
{
	return (HCURSOR) m_hIcon;
}

HBRUSH CHMIcan_usbDlg::OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor) 
{
	HBRUSH hbr = CDialog::OnCtlColor(pDC, pWnd, nCtlColor);
	
	// TODO: Change any attributes of the DC here
	if (pWnd == this)
	{
		return m_brBk;
	}
	// TODO: Return a different brush if the default is not desired
	return hbr;
}

BOOL CHMIcan_usbDlg::PreTranslateMessage(MSG* pMsg) 
{
//先把焦点交到几个按钮处
/*	if(CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET1)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET2)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET3)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET4)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET5)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET6)||
		CHMIcan_usbDlg::GetFocus() != GetDlgItem(IDC_CTRL_SET7))
	{
		m_static_SET1.SetFocus();
	}
*/
//下移动
		if(pMsg->message==WM_KEYDOWN && (pMsg->wParam==VK_DOWN))
		{
			if(index==6)  index=0;
			else index++;
			
			if(index==0) 
			{
				m_static_SET1.SetFocus();
				m_static_SET1.bkColor( bk1 );
				m_static_SET2.bkColor( bk );
				m_static_SET7.bkColor( bk );
				m_tip1.ShowWindow(SW_SHOW);
				m_tip2.ShowWindow(SW_HIDE);
				m_tip7.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==1) 
			{
				m_static_SET2.SetFocus();
				m_static_SET2.bkColor( bk1 );
				m_static_SET1.bkColor( bk );
				m_static_SET3.bkColor( bk );
				m_tip1.ShowWindow(SW_HIDE);
				m_tip2.ShowWindow(SW_SHOW);
				m_tip3.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==2) 
			{
				m_static_SET3.SetFocus();
				m_static_SET3.bkColor( bk1 );
				m_static_SET2.bkColor( bk );
				m_static_SET4.bkColor( bk );
				m_tip2.ShowWindow(SW_HIDE);
				m_tip3.ShowWindow(SW_SHOW);
				m_tip4.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==3) 
			{
				m_static_SET4.SetFocus();
				m_static_SET4.bkColor( bk1 );
				m_static_SET3.bkColor( bk );
				m_static_SET5.bkColor( bk );
				m_tip3.ShowWindow(SW_HIDE);
				m_tip4.ShowWindow(SW_SHOW);
				m_tip5.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==4) 
			{
				m_static_SET5.SetFocus();
				m_static_SET5.bkColor( bk1 );
				m_static_SET4.bkColor( bk );
				m_static_SET6.bkColor( bk );
				m_tip4.ShowWindow(SW_HIDE);
				m_tip5.ShowWindow(SW_SHOW);
				m_tip6.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==5) 
			{
				m_static_SET6.SetFocus();
				m_static_SET6.bkColor( bk1 );
				m_static_SET5.bkColor( bk );
				m_static_SET7.bkColor( bk );
				m_tip5.ShowWindow(SW_HIDE);
				m_tip6.ShowWindow(SW_SHOW);
				m_tip7.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==6) 
			{
				m_static_SET7.SetFocus();
				m_static_SET7.bkColor( bk1 );
				m_static_SET6.bkColor( bk );
				m_static_SET1.bkColor( bk );
				m_tip6.ShowWindow(SW_HIDE);
				m_tip7.ShowWindow(SW_SHOW);
				m_tip1.ShowWindow(SW_HIDE);
				return   TRUE;
			}

		}
		
//上移动
		if(pMsg->message==WM_KEYDOWN && (pMsg->wParam==VK_UP))
		{
			
			if(index==0)  index=6;
			else index--;
			
			if(index==0) 
			{
				m_static_SET1.SetFocus();
				m_static_SET1.bkColor( bk1 );
				m_static_SET2.bkColor( bk );
				m_static_SET7.bkColor( bk );
				m_tip1.ShowWindow(SW_SHOW);
				m_tip2.ShowWindow(SW_HIDE);
				m_tip7.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==1) 
			{
				m_static_SET2.SetFocus();
				m_static_SET2.bkColor( bk1 );
				m_static_SET1.bkColor( bk );
				m_static_SET3.bkColor( bk );
				m_tip1.ShowWindow(SW_HIDE);
				m_tip2.ShowWindow(SW_SHOW);
				m_tip3.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==2) 
			{
				m_static_SET3.SetFocus();
				m_static_SET3.bkColor( bk1 );
				m_static_SET2.bkColor( bk );
				m_static_SET4.bkColor( bk );
				m_tip2.ShowWindow(SW_HIDE);
				m_tip3.ShowWindow(SW_SHOW);
				m_tip4.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==3) 
			{
				m_static_SET4.SetFocus();
				m_static_SET4.bkColor( bk1 );
				m_static_SET3.bkColor( bk );
				m_static_SET5.bkColor( bk );
				m_tip3.ShowWindow(SW_HIDE);
				m_tip4.ShowWindow(SW_SHOW);
				m_tip5.ShowWindow(SW_HIDE);
				return   TRUE;
			}
			if(index==4) 
			{
				m_static_SET5.SetFocus();
				m_static_SET5.bkColor( bk1 );
				m_static_SET4.bkColor( bk );
				m_static_SET6.bkColor( bk );
				m_tip4.ShowWindow(SW_HIDE);