c8051t630_defs.h

芯科原厂所有c8051fxx程序的例子。

#define SFR_P0       0x80
#define SFR_TCON     0x88
#define SFR_P1       0x90
#define SFR_SCON0    0x98
#define SFR_P2       0xA0
#define SFR_IE       0xA8
// Address 0xB0 UNUSED
#define SFR_IP       0xB8
#define SFR_SMB0CN   0xC0
#define SFR_TMR2CN   0xC8
#define SFR_PSW      0xD0
#define SFR_PCA0CN   0xD8
#define SFR_ACC      0xE0
#define SFR_ADC0CN   0xE8
#define SFR_B        0xF0
#define SFR_SPI0CN   0xF8

//-----------------------------------------------------------------------------
// Bit Definitions
//-----------------------------------------------------------------------------

// TCON 0x88
SBIT (TF1, SFR_TCON, 7);               // Timer 1 Overflow Flag
SBIT (TR1, SFR_TCON, 6);               // Timer 1 On/Off Control
SBIT (TF0, SFR_TCON, 5);               // Timer 0 Overflow Flag
SBIT (TR0, SFR_TCON, 4);               // Timer 0 On/Off Control
SBIT (IE1, SFR_TCON, 3);               // Ext. Interrupt 1 Edge Flag
SBIT (IT1, SFR_TCON, 2);               // Ext. Interrupt 1 Type
SBIT (IE0, SFR_TCON, 1);               // Ext. Interrupt 0 Edge Flag
SBIT (IT0, SFR_TCON, 0);               // Ext. Interrupt 0 Type

// SCON0 0x98
SBIT (S0MODE, SFR_SCON0, 7);           // UART0 Mode
                                       // Bit6 UNUSED
SBIT (MCE0, SFR_SCON0, 5);             // UART0 MCE
SBIT (REN0, SFR_SCON0, 4);             // UART0 RX Enable
SBIT (TB80, SFR_SCON0, 3);             // UART0 TX Bit 8
SBIT (RB80, SFR_SCON0, 2);             // UART0 RX Bit 8
SBIT (TI0, SFR_SCON0, 1);              // UART0 TX Interrupt Flag
SBIT (RI0, SFR_SCON0, 0);              // UART0 RX Interrupt Flag

// IE 0xA8
SBIT (EA, SFR_IE, 7);                  // Global Interrupt Enable
SBIT (ESPI0, SFR_IE, 6);               // SPI0 Interrupt Enable
SBIT (ET2, SFR_IE, 5);                 // Timer 2 Interrupt Enable
SBIT (ES0, SFR_IE, 4);                 // UART0 Interrupt Enable
SBIT (ET1, SFR_IE, 3);                 // Timer 1 Interrupt Enable
SBIT (EX1, SFR_IE, 2);                 // External Interrupt 1 Enable
SBIT (ET0, SFR_IE, 1);                 // Timer 0 Interrupt Enable
SBIT (EX0, SFR_IE, 0);                 // External Interrupt 0 Enable

// IP 0xB8
                                       // Bit7 UNUSED
SBIT (PSPI0, SFR_IP, 6);               // SPI0 Priority
SBIT (PT2, SFR_IP, 5);                 // Timer 2 Priority
SBIT (PS0, SFR_IP, 4);                 // UART0 Priority
SBIT (PT1, SFR_IP, 3);                 // Timer 1 Priority
SBIT (PX1, SFR_IP, 2);                 // External Interrupt 1 Priority
SBIT (PT0, SFR_IP, 1);                 // Timer 0 Priority
SBIT (PX0, SFR_IP, 0);                 // External Interrupt 0 Priority

// SMB0CN 0xC0
SBIT (MASTER, SFR_SMB0CN, 7);          // SMBus0 Master/Slave
SBIT (TXMODE, SFR_SMB0CN, 6);          // SMBus0 Transmit Mode
SBIT (STA, SFR_SMB0CN, 5);             // SMBus0 Start Flag
SBIT (STO, SFR_SMB0CN, 4);             // SMBus0 Stop Flag
SBIT (ACKRQ, SFR_SMB0CN, 3);           // SMBus0 Acknowledge Request
SBIT (ARBLOST, SFR_SMB0CN, 2);         // SMBus0 Arbitration Lost
SBIT (ACK, SFR_SMB0CN, 1);             // SMBus0 Acknowledge Flag
SBIT (SI, SFR_SMB0CN, 0);              // SMBus0 Interrupt Pending Flag

// TMR2CN 0xC8
SBIT (TF2H, SFR_TMR2CN, 7);            // Timer 2 High Byte Overflow Flag
SBIT (TF2L, SFR_TMR2CN, 6);            // Timer 2 Low Byte Overflow Flag
SBIT (TF2LEN, SFR_TMR2CN, 5);          // Timer 2 Low Byte Interrupt Enable
SBIT (TF2CEN, SFR_TMR2CN, 4);          // Timer 2 Lfo Capture Enable
SBIT (T2SPLIT, SFR_TMR2CN, 3);         // Timer 2 Split Mode Enable
SBIT (TR2, SFR_TMR2CN, 2);             // Timer 2 On/Off Control
                                       // Bit6 UNUSED
SBIT (T2XCLK, SFR_TMR2CN, 0);          // Timer 2 External Clock Select

// PSW 0xD0
SBIT (CY, SFR_PSW, 7);                 // Carry Flag
SBIT (AC, SFR_PSW, 6);                 // Auxiliary Carry Flag
SBIT (F0, SFR_PSW, 5);                 // User Flag 0
SBIT (RS1, SFR_PSW, 4);                // Register Bank Select 1
SBIT (RS0, SFR_PSW, 3);                // Register Bank Select 0
SBIT (OV, SFR_PSW, 2);                 // Overflow Flag
SBIT (F1, SFR_PSW, 1);                 // User Flag 1
SBIT (P, SFR_PSW, 0);                  // Accumulator Parity Flag

// PCA0CN 0xD8
SBIT (CF, SFR_PCA0CN, 7);              // PCA0 Counter Overflow Flag
SBIT (CR, SFR_PCA0CN, 6);              // PCA0 Counter Run Control Bit
                                       // Bit5 UNUSED
                                       // Bit4 UNUSED
                                       // Bit3 UNUSED
SBIT (CCF2, SFR_PCA0CN, 2);            // PCA0 Module 2 Interrupt Flag
SBIT (CCF1, SFR_PCA0CN, 1);            // PCA0 Module 1 Interrupt Flag
SBIT (CCF0, SFR_PCA0CN, 0);            // PCA0 Module 0 Interrupt Flag

// ADC0CN 0xE8
SBIT (AD0EN, SFR_ADC0CN, 7);           // ADC0 Enable
SBIT (AD0TM, SFR_ADC0CN, 6);           // ADC0 Track Mode
SBIT (AD0INT, SFR_ADC0CN, 5);          // ADC0 EOC Interrupt Flag
SBIT (AD0BUSY, SFR_ADC0CN, 4);         // ADC0 Busy Flag
SBIT (AD0WINT, SFR_ADC0CN, 3);         // ADC0 Window Interrupt Flag
SBIT (AD0CM2, SFR_ADC0CN, 2);          // ADC0 Convert Start Mode Bit 2
SBIT (AD0CM1, SFR_ADC0CN, 1);          // ADC0 Convert Start Mode Bit 1
SBIT (AD0CM0, SFR_ADC0CN, 0);          // ADC0 Convert Start Mode Bit 0

// SPI0CN 0xF8
SBIT (SPIF, SFR_SPI0CN, 7);            // SPI0 Interrupt Flag
SBIT (WCOL, SFR_SPI0CN, 6);            // SPI0 Write Collision Flag
SBIT (MODF, SFR_SPI0CN, 5);            // SPI0 Mode Fault Flag
SBIT (RXOVRN, SFR_SPI0CN, 4);          // SPI0 RX Overrun Flag
SBIT (NSSMD1, SFR_SPI0CN, 3);          // SPI0 Slave Select Mode 1
SBIT (NSSMD0, SFR_SPI0CN, 2);          // SPI0 Slave Select Mode 0
SBIT (TXBMT, SFR_SPI0CN, 1);           // SPI0 TX Buffer Empty Flag
SBIT (SPIEN, SFR_SPI0CN, 0);           // SPI0 SPI0 Enable

//-----------------------------------------------------------------------------
// Interrupt Priorities
//-----------------------------------------------------------------------------

#define INTERRUPT_INT0             0   // External Interrupt 0
#define INTERRUPT_TIMER0           1   // Timer0 Overflow
#define INTERRUPT_INT1             2   // External Interrupt 1
#define INTERRUPT_TIMER1           3   // Timer1 Overflow
#define INTERRUPT_UART0            4   // Serial Port 0
#define INTERRUPT_TIMER2           5   // Timer2 Overflow
#define INTERRUPT_SPI0             6   // Serial Peripheral Interface 0
#define INTERRUPT_SMBUS0           7   // SMBus0 Interface
#define INTERRUPT_PORT_MATCH       8   // Port Match Event
#define INTERRUPT_ADC0_WINDOW      9   // ADC0 Window Comparison
#define INTERRUPT_ADC0_EOC         10  // ADC0 End Of Conversion
#define INTERRUPT_PCA0             11  // PCA0 Peripheral
#define INTERRUPT_COMPARATOR0      12  // Comparator0
                                       // Interrupt 13 is RESERVED
#define INTERRUPT_TIMER3           14  // Timer3 Overflow


//-----------------------------------------------------------------------------
// Header File PreProcessor Directive
//-----------------------------------------------------------------------------

#endif                                 // #define C8051T630_DEFS_H

//-----------------------------------------------------------------------------
// End Of File
//-----------------------------------------------------------------------------