c8051f410.h

芯科原厂所有c8051fxx程序的例子。

//-----------------------------------------------------------------------------
// C8051F410.h
//-----------------------------------------------------------------------------
// Copyright 2005 Silicon Laboratories, Inc.
// http://www.silabs.com
//
// Program Description:
//
// Register/bit definitions for the C8051F41x product family.
//
//
// FID:            41X000002
// Target:         C8051F410, F411, F412, F413
// Tool chain:     Keil
// Command Line:   None
//
//
// Release 1.0
//    -Initial Release (GP, PKC)
//    -26 JAN 2006
//

//-----------------------------------------------------------------------------
// Header File Preprocessor Directive
//-----------------------------------------------------------------------------

#ifndef C8051F410_H
#define C8051F410_H

//-----------------------------------------------------------------------------
// Byte Registers
//-----------------------------------------------------------------------------

sfr P0              = 0x80;            // Port 0 latch
sfr SP              = 0x81;            // Stack pointer
sfr DPL             = 0x82;            // Data pointer low
sfr DPH             = 0x83;            // Data pointer high
sfr CRC0CN          = 0x84;            // CRC0 control
sfr CRC0IN          = 0x85;            // CRC0 input data
sfr CRC0DAT         = 0x86;            // CRC0 output data
sfr PCON            = 0x87;            // Power control
sfr TCON            = 0x88;            // Timer/counter control
sfr TMOD            = 0x89;            // Timer/counter mode
sfr TL0             = 0x8A;            // Timer/counter 0 low
sfr TL1             = 0x8B;            // Timer/counter 1 low
sfr TH0             = 0x8C;            // Timer/counter 0 high
sfr TH1             = 0x8D;            // Timer/counter 1 high
sfr CKCON           = 0x8E;            // Clock control
sfr PSCTL           = 0x8F;            // Program store R/W control
sfr P1              = 0x90;            // Port 1 latch
sfr TMR3CN          = 0x91;            // Timer/counter 3 control
sfr TMR3RLL         = 0x92;            // Timer/counter 3 reload low
sfr TMR3RLH         = 0x93;            // Timer/counter 3 reload high
sfr TMR3L           = 0x94;            // Timer/counter 3 low
sfr TMR3H           = 0x95;            // Timer/counter 3 high
sfr IDA0L           = 0x96;            // Current mode DAC0 low
sfr IDA0H           = 0x97;            // Current mode DAC0 high
sfr SCON0           = 0x98;            // UART0 control
sfr SBUF0           = 0x99;            // UART0 data buffer
sfr CPT1CN          = 0x9A;            // Comparator1 control
sfr CPT0CN          = 0x9B;            // Comparator0 control
sfr CPT1MD          = 0x9C;            // Comparator1 mode selection
sfr CPT0MD          = 0x9D;            // Comparator0 mode selection
sfr CPT1MX          = 0x9E;            // Comparator1 mux selection
sfr CPT0MX          = 0x9F;            // Comparator0 mux selection
sfr P2              = 0xA0;            // Port 2 latch
sfr SPI0CFG         = 0xA1;            // SPI0 configuration
sfr SPI0CKR         = 0xA2;            // SPI0 clock rate control
sfr SPI0DAT         = 0xA3;            // SPI0 data
sfr P0MDOUT         = 0xA4;            // Port 0 output mode configuration
sfr P1MDOUT         = 0xA5;            // Port 1 output mode configuration
sfr P2MDOUT         = 0xA6;            // Port 2 output mode configuration
sfr IE              = 0xA8;            // Interrupt enable
sfr CLKSEL          = 0xA9;            // Clock select
sfr EMI0CN          = 0xAA;            // External memory interface control
sfr CLKMUL          = 0xAB;            // Clock multiplier
sfr RTC0ADR         = 0xAC;            // RTC0 address
sfr RTC0DAT         = 0xAD;            // RTC0 data
sfr RTC0KEY         = 0xAE;            // RTC0 lock and key
sfr ONESHOT         = 0xAF;            // Flash oneshot timing
sfr P0ODEN          = 0xB0;            // Port0 Hi-Z overdrive mode enable
sfr OSCXCN          = 0xB1;            // External oscillator control
sfr OSCICN          = 0xB2;            // Internal oscillator control
sfr OSCICL          = 0xB3;            // Internal oscillator calibration
sfr IDA1CN          = 0xB5;            // Current mode DAC1 control
sfr FLSCL           = 0xB6;            // Flash scale
sfr FLKEY           = 0xB7;            // Flash lock and key
sfr IP              = 0xB8;            // Interrupt priority
sfr IDA0CN          = 0xB9;            // Current mode DAC0 control
sfr ADC0TK          = 0xBA;            // ADC0 tracking
sfr ADC0MX          = 0xBB;            // ADC0 mux
sfr ADC0CF          = 0xBC;            // ADC0 configuration
sfr ADC0L           = 0xBD;            // ADC0 data low
sfr ADC0H           = 0xBE;            // ADC0 data high
sfr P1MASK          = 0xBF;            // Port1 mask
sfr SMB0CN          = 0xC0;            // SMBus0 control
sfr SMB0CF          = 0xC1;            // SMBus0 configuration
sfr SMB0DAT         = 0xC2;            // SMBus0 data
sfr ADC0GTL         = 0xC3;            // ADC0 window greater than low byte
sfr ADC0GTH         = 0xC4;            // ADC0 window greater than high byte
sfr ADC0LTL         = 0xC5;            // ADC0 window less than low byte
sfr ADC0LTH         = 0xC6;            // ADC0 window less than high byte
sfr P0MASK          = 0xC7;            // Port0 mask
sfr TMR2CN          = 0xC8;            // Timer/counter 2 control
sfr REG0CN          = 0xC9;            // Voltage regulator control
sfr TMR2RLL         = 0xCA;            // Timer/counter 2 reload low
sfr TMR2RLH         = 0xCB;            // Timer/counter 2 reload high
sfr TMR2L           = 0xCC;            // Timer/counter 2 low
sfr TMR2H           = 0xCD;            // Timer/counter 2 high
sfr PCA0CPM5        = 0xCE;            // PCA0 module 5 mode
sfr P1MAT           = 0xCF;            // Port1 match
sfr PSW             = 0xD0;            // Program status word
sfr REF0CN          = 0xD1;            // Voltage reference control
sfr PCA0CPL5        = 0xD2;            // PCA0 module 5 low
sfr PCA0CPH5        = 0xD3;            // PCA0 module 5 high
sfr P0SKIP          = 0xD4;            // Port 0 skip
sfr P1SKIP          = 0xD5;            // Port 1 skip
sfr P2SKIP          = 0xD6;            // Port 2 skip
sfr P0MAT           = 0xD7;            // Port 0 match
sfr PCA0CN          = 0xD8;            // PCA0 control
sfr PCA0MD          = 0xD9;            // PCA0 mode
sfr PCA0CPM0        = 0xDA;            // PCA0 module 0 mode
sfr PCA0CPM1        = 0xDB;            // PCA0 module 1 mode
sfr PCA0CPM2        = 0xDC;            // PCA0 module 2 mode
sfr PCA0CPM3        = 0xDD;            // PCA0 module 3 mode
sfr PCA0CPM4        = 0xDE;            // PCA0 module 4 mode
sfr CRC0FLIP        = 0xDF;            // CRC0 bit flip
sfr ACC             = 0xE0;            // Accumulator
sfr XBR0            = 0xE1;            // Port I/O crossbar control 0
sfr XBR1            = 0xE2;            // Port I/O crossbar control 1
sfr PFE0CN          = 0xE3;            // Prefetch engine control
sfr IT01CF          = 0xE4;            // INT0/INT1 configuration
sfr EIE1            = 0xE6;            // Extended interrupt enable 1
sfr EIE2            = 0xE7;            // Extended interrupt enable 2
sfr ADC0CN          = 0xE8;            // ADC0 control
sfr PCA0CPL1        = 0xE9;            // PCA0 module 1 capture low
sfr PCA0CPH1        = 0xEA;            // PCA0 module 1 capture high
sfr PCA0CPL2        = 0xEB;            // PCA0 module 2 capture low
sfr PCA0CPH2        = 0xEC;            // PCA0 module 2 capture high
sfr PCA0CPL3        = 0xED;            // PCA0 module 3 capture low
sfr PCA0CPH3        = 0xEE;            // PCA0 module 3 capture high
sfr RSTSRC          = 0xEF;            // Reset source configuration/status
sfr B               = 0xF0;            // B register
sfr P0MDIN          = 0xF1;            // Port 0 input mode configuration
sfr P1MDIN          = 0xF2;            // Port 1 input mode configuration
sfr P2MDIN          = 0xF3;            // Port 2 input mode configuration
sfr IDA1L           = 0xF4;            // Current mode DAC1 data low
sfr IDA1H           = 0xF5;            // Current mode DAC1 data high