oddebug.h

AVR Doper 简化的M8做的USB接口 的STK500V2

/* Name: oddebug.h
 * Project: AVR library
 * Author: Christian Starkjohann
 * Creation Date: 2005-01-16
 * Tabsize: 4
 * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: Proprietary, free under certain conditions. See Documentation.
 * This Revision: $Id: oddebug.h 215 2006-07-10 21:54:51Z cs $
 */

#ifndef __oddebug_h_included__
#define __oddebug_h_included__

/*
说明:

本模块实现调试信息的串行输出. Debugging 可通过宏'DEBUG_LEVEL'来配置. 若此宏未定义 或是定义为0, 所有debugging
信息都不会输出. 若是 1, DBG1 logs 将输出, 但不输出 DBG2. 若为2, DBG1 和 DBG2 logs 将都会输出.

A debug log 加了个标号('prefix') 来指示是何种 debug log 输出了
and a memory block to dump in hex ('data' and 'len').
*/


#ifndef F_CPU
#   define  F_CPU   12000000    /* 12 MHz */
#endif

/* make sure we have the UART defines: */
#include "iarcompat.h"
#ifndef __IAR_SYSTEMS_ICC__
#   include <avr/io.h>
#endif

#ifndef uchar
#   define  uchar   unsigned char
#endif

#if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */
#   warning "Debugging disabled because device has no UART"
#   undef   DEBUG_LEVEL
#endif

#ifndef DEBUG_LEVEL
#   define  DEBUG_LEVEL 0
#endif

/* ------------------------------------------------------------------------- */

#if DEBUG_LEVEL > 0
#   define  DBG1(prefix, data, len) odDebug(prefix, data, len)
#else
#   define  DBG1(prefix, data, len)
#endif

#if DEBUG_LEVEL > 1
#   define  DBG2(prefix, data, len) odDebug(prefix, data, len)
#else
#   define  DBG2(prefix, data, len)
#endif

/* ------------------------------------------------------------------------- */

#if DEBUG_LEVEL > 0
extern void odDebug(uchar prefix, uchar *data, uchar len);

/* Try to find our control registers; ATMEL likes to rename these */

#if defined UBRR
#   define  ODDBG_UBRR  UBRR
#elif defined UBRRL
#   define  ODDBG_UBRR  UBRRL
#elif defined UBRR0
#   define  ODDBG_UBRR  UBRR0
#elif defined UBRR0L
#   define  ODDBG_UBRR  UBRR0L
#endif

#if defined UCR
#   define  ODDBG_UCR   UCR
#elif defined UCSRB
#   define  ODDBG_UCR   UCSRB
#elif defined UCSR0B
#   define  ODDBG_UCR   UCSR0B
#endif

#if defined TXEN
#   define  ODDBG_TXEN  TXEN
#else
#   define  ODDBG_TXEN  TXEN0
#endif

#if defined USR
#   define  ODDBG_USR   USR
#elif defined UCSRA
#   define  ODDBG_USR   UCSRA
#elif defined UCSR0A
#   define  ODDBG_USR   UCSR0A
#endif

#if defined UDRE
#   define  ODDBG_UDRE  UDRE
#else
#   define  ODDBG_UDRE  UDRE0
#endif

#if defined UDR
#   define  ODDBG_UDR   UDR
#elif defined UDR0
#   define  ODDBG_UDR   UDR0
#endif

static inline void  odDebugInit(void)
{
    ODDBG_UCR |= (1<<ODDBG_TXEN);
    ODDBG_UBRR = F_CPU / (19200 * 16L) - 1;
}
#else
#   define odDebugInit()
#endif

/* ------------------------------------------------------------------------- */

#endif /* __oddebug_h_included__ */