system_mb1000.ucf

ucos2在macroblaze上的移植代码

#------------------------------------------------------------------------------
# Clock Period Constraints
#------------------------------------------------------------------------------
INST mb_dcm_ip/mb_dcm_ip/dcm_i CLKIN_PERIOD = 10.0;
INST mb_dcm_ip/mb_dcm_ip/dcm_i  CLKFX_MULTIPLY=1;
INST mb_dcm_ip/mb_dcm_ip/dcm_i  DLL_FREQUENCY_MODE = LOW;
INST mb_dcm_ip/mb_dcm_ip/dcm_i  DFS_FREQUENCY_MODE = HIGH;

NET "sys_clk_raw" PERIOD = 10.00;


NET "tx" LOC = "A7";
NET "rx" LOC = "B7";
NET "sys_clk_raw" LOC = "B11";
NET "system_reset" LOC = "B6";
NET "system_reset" PULLUP;

NET "leds_1<0>" LOC = "D9";
NET "leds_1<1>" LOC = "C9";
NET "leds_1<2>" LOC = "F11";
NET "leds_1<3>" LOC = "F9";
NET "leds_1<4>" LOC = "F10";
NET "leds_1<5>" LOC = "D10";
NET "leds_1<6>" LOC = "C10";
#NET "leds_1<7>" LOC = "";

NET "leds_2<0>" LOC = "B9";
NET "leds_2<1>" LOC = "A8";
NET "leds_2<2>" LOC = "B8";
NET "leds_2<3>" LOC = "E7";
NET "leds_2<4>" LOC = "E8";
NET "leds_2<5>" LOC = "E10";
NET "leds_2<6>" LOC = "E9";
#NET "leds_2<7>" LOC = "";

NET "sw<0>" LOC = "B4";
NET "sw<1>" LOC = "A4";
NET "sw<2>" LOC = "C4";
NET "sw<3>" LOC = "C5";
NET "sw<4>" LOC = "B5";
NET "sw<5>" LOC = "A5";
NET "sw<6>" LOC = "D6";
NET "sw<7>" LOC = "C6";