s3c6410_onenand.h

来自「SAMSUNG S3C6410 CPU BSP for winmobile6」· C头文件 代码 · 共 112 行

//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
//------------------------------------------------------------------------------
//
//  Header: S3C6410_onenand.h
//
//  Defines the OneNAND Controller register layout and associated types and constants.
//
#ifndef __S3C6410_ONENAND_H
#define __S3C6410_ONENAND_H

#if __cplusplus
extern "C" {
#endif

//------------------------------------------------------------------------------
//
//  Type:  S3C6410_ONENANDCON_REG
//
//  Defines the OneNAND control register layout. This register bank is 
//  located by the constant S3C6410_BASE_REG_XX_ONENANDCON in the configuration file
//  S3C6410_base_reg_cfg.h.
//
// OneNAND Bank0 Base Address = 0x70100000
// OneNAND Bank1 Base Address = 0x70180000

typedef struct  {
	UINT32 MEM_CFG			; // 0x000
	UINT32 pad1[3];
	UINT32 BURST_LEN		; // 0x010
	UINT32 pad2[3];
	UINT32 MEM_RESET0		; // 0x020
	UINT32 pad3[3];
	UINT32 INT_ERR_STAT	; // 0x030
	UINT32 pad4[3];
	UINT32 INT_ERR_MASK	; // 0x040
	UINT32 pad5[3];
	UINT32 INT_ERR_ACK		; // 0x050
	UINT32 pad6[3];
	UINT32 ECC_ERR_STAT	; // 0x060
	UINT32 pad7[3];
	UINT32 MANUFACT_ID		; // 0x070
	UINT32 pad8[3];
	UINT32 DEVICE_ID		; // 0x080
	UINT32 pad9[3];
	UINT32 DATA_BUF_SIZE	; // 0x090
	UINT32 pad10[3];
	UINT32 BOOT_BUF_SIZE	; // 0x0A0
	UINT32 pad11[3];
	UINT32 BUF_AMOUNT		; // 0x0B0
	UINT32 pad12[3];
	UINT32 TECH			; // 0x0C0
	UINT32 pad13[3];
	UINT32 FBA_WIDTH		; // 0x0D0
	UINT32 pad14[3];
	UINT32 FPA_WIDTH		; // 0x0E0
	UINT32 pad15[3];
	UINT32 FSA_WIDTH		; // 0x0F0
	UINT32 pad16[3];
	UINT32 REVISION		; // 0x100
	UINT32 pad17[3];
	UINT32 DATARAM0		; // 0x110
	UINT32 pad18[3];
	UINT32 DATARAM1		; // 0x120
	UINT32 pad19[3];
	UINT32 SYNC_MODE		; // 0x130
	UINT32 pad20[3];
	UINT32 TRANS_SPARE		; // 0x140
	UINT32 pad21[3];
	UINT32 LOCK_BIT		; // 0x150
	UINT32 pad22[3];
	UINT32 DBS_DFS_WIDTH	; // 0x160
	UINT32 pad23[3];
	UINT32 PAGE_CNT		; // 0x170
	UINT32 pad24[3];
	UINT32 ERR_PAGE_ADDR	; // 0x180
	UINT32 pad25[3];
	UINT32 BURST_RD_LAT	; // 0x190
	UINT32 pad26[3];
	UINT32 INT_PIN_ENABLE	; // 0x1A0
	UINT32 pad27[3];
	UINT32 INT_MON_CYC		; // 0x1B0
	UINT32 pad28[3];
	UINT32 ACC_CLOCK		; // 0x1C0
	UINT32 pad29[3];
	UINT32 SLOW_RD_PATH	; // 0x1D0
	UINT32 pad30[3];
	UINT32 ERR_BLK_ADDR	; // 0x1E0
	UINT32 pad31[3];
	UINT32 FLASH_VER_ID	; // 0x1F0
	UINT32 pad32[67];		// 0x1F4~0x300
	UINT32 FLAH_AUX_CNTRL;	// 0x300
	UINT32 pad33[3];
	UINT32 FLAS_AFIFO_CNT;	// 0x310
} S3C6410_ONENANDCON_REG, *PS3C6410_ONENANDCON_REG;

//------------------------------------------------------------------------------

#if __cplusplus
}
#endif

#endif