armusbocd_tiny.cfg

来自「lpc2106 LCD demo. the demo is for use w」· CFG 代码 · 共 37 行

#daemon configuration
telnet_port 4444
gdb_port 3333

#interface
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG TINY A"
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0004
jtag_speed 3

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst separate

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup reset

#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30

#target_script 0 reset oocd_flash2138.script
working_area 0 0x40000000 0x40000 nobackup

#flash configuration
flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum
# pre-OpenOCD189
#flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14745 calc_checksum

# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger