debugmsg.lst

本程序是一个RS232转网口的。是一个透明传输的模块

                      case 48: 
                                   Uart0Putf("48:收到ElseGetPage");
                                   break;
                      case 49: 
                                   Uart0Putf("49:从FLASH读出参数");
                                   break;
                      case 50: 
                                   Uart0Putf("50:将参数写入到FLASH");
                                   break;
                      case 51: 
                                   Uart0Putf("51:Uart FIFO Full");
                                   break;
                      case 52: 
                                   Uart0Putf("52:Uart FIFO Empty");
                                   break;
                      case 53: 
                                   Uart0Putf("53:发送心跳包");
                                   break;     
                      case 54: 
                                   break;     
                      case 55: 
                                   Uart0Putf("55:发ARP探测");
                                   break;     
                      case 56: 
C51 COMPILER V7.06   DEBUGMSG                                                              09/26/2008 13:36:20 PAGE 4   

                                   Uart0Putf("56:HTTP模式强制为LISTEN");
                                   break;     
                      case 57: 
                                   Uart0Putf("57:UDP:Sender did not compute cksum");
                                   break;     
                      case 58: 
                                   Uart0Putf("58:UDP:Msg rcvd with good cksum");
                                   break;     
                      case 59: 
                                   Uart0Putf("59:UDP:Error, bad cksum");
                                   break;
                      case 60: 
                                   Uart0Putf("60:2s一次DISCOVER,进入SELECT");
                                   break;
                      case 61: 
                                   Uart0Putf("61:收到OFFER,发REQUEST,进入REQUEST");
                                   break;
                      case 62:  
                                    Uart0Putf("62:收到ACK,进入BOUND");
                                   break;     
                      case 63: 
                                   Uart0Putf("63:50%到,发REQUEST,进入RENEW");
                                   break;     
                      case 64: 
                                   //Uart0Putf("64:RENEW收到ACK,进入BOUND");
                                   break;     
                      case 65: 
                                   //Uart0Putf("65:RENEW收到NACK,进入INIT");
                                   break;     
                      case 66: 
                                   Uart0Putf("66:87%到,发REQUEST,进入REBIND");
                                   break;     
                      case 67: 
                                   Uart0Putf("67:RENEW_REBIND收到ACK,进入BOUND");
                                   break;     
                      case 68: 
                                   Uart0Putf("68:RENEW_REBIND收到NACK,进入INIT");
                                   break;
                      case 69: 
                                   Uart0Putf("69:100%租期到,进入INIT");
                                   break;
                      case 70: 
                                   Uart0Putf("未知的UDP广播不处理");
                                   break;
                      case 71: 
                                   //Uart0Putf("66:87%到,发REQUEST,进入REWIND");
                                   break;                     
                              default:
                                   Uart0Putf("未知信息");
                                   break;
                      }
              }
              #endif
 232          
 233          
 234          void HintMsg(unsigned char id,unsigned char *content)
 235          {
 236   1      
 237   1          Uart0Putf("\r\n");
 238   1          switch(id) {
 239   2              case 1:
 240   2                           Uart0Putf("1:Reply from");
C51 COMPILER V7.06   DEBUGMSG                                                              09/26/2008 13:36:20 PAGE 5   

 241   2                               Uart0Puts(content);
 242   2                           break;
 243   2              case 2:
 244   2                           Uart0Putf("2:Host Unreachable!");
 245   2                               Uart0Puts(content);
 246   2                           break;
 247   2              case 3:
 248   2                           Uart0Putf("进入配置状态");
 249   2                           break;
 250   2              case 4:
 251   2                           Uart0Putf("退出配置进入主程序");
 252   2                           break;
 253   2              case 5:
 254   2                               Uart0Putf("重启...");
 255   2                           break;
 256   2              case 6:
 257   2                           Uart0Putf("1秒内输入S或s进入配置");
 258   2                           break;                      
 259   2              case 7:
 260   2                           Uart0Putf("CONNECT SUCCESSFUL\r\n");
 261   2                               Uart0Puts(content);
 262   2                           break;     
 263   2              case 8:
 264   2                           Uart0Putf("\r\nRUNNING...");
 265   2                           break;     
 266   2              case 9:
 267   2                   Uart0Putf("心跳包超时重连");
 268   2                           break;     
 269   2              case 10:
 270   2                   Uart0Putf("ARP超时重启");
 271   2                           break;
 272   2              case 11:
 273   2                           Uart0Putf("HTTP 控制模块重启 ");
 274   2                           break;
 275   2              case 12:
 276   2                           Uart0Putf("DHCP自动分配IP成功!");
 277   2                           break;
 278   2              case 13:
 279   2                           Uart0Putf("87%续租超时 重新申请!");
 280   2                           break;
 281   2              case 14:
 282   2                           Uart0Putf("恢复出厂值");
 283   2                           break;
 284   2              case 15:
 285   2                           Uart0Putf("恢复出厂值并重启...");
 286   2                           break;
 287   2              case 16:
 288   2                           //Uart0Putf("发ARP请求");
 289   2                           break;
 290   2              case 17:
 291   2                           //Uart0Putf("指派DNS副IP: ");
 292   2                           break;
 293   2              case 18:
 294   2                           //Uart0Putf("租期时间: ");
 295   2                           break;
 296   2                      default:
 297   2                           //Uart0Putf("未知信息");
 298   2                           break;
 299   2              }
 300   1      }
 301          

C51 COMPILER V7.06   DEBUGMSG                                                              09/26/2008 13:36:20 PAGE 6   


MODULE INFORMATION:   STATIC OVERLAYABLE
   CODE SIZE        =    187    ----
   CONSTANT SIZE    =    251    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
   DATA SIZE        =   ----       4
   IDATA SIZE       =   ----    ----
   BIT SIZE         =   ----    ----
END OF MODULE INFORMATION.


C51 COMPILATION COMPLETE.  0 WARNING(S),  0 ERROR(S)