rei2c.fit.qmsg

用VHDL编写的quartusii平台上的串行EEPROM配置读取的程序。

{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "12 unused 3.30 1 10 1 " "Info: Number of I/O pins in group: 12 (unused VREF, 3.30 VCCIO, 1 input, 10 output, 1 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 4 40 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 4 total pin(s) used --  40 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 42 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use unused 0 45 " "Info: I/O bank number 3 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  45 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 0 42 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "4.905 ns register register " "Info: Estimated most critical path is register to register delay of 4.905 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns count\[1\] 1 REG LAB_X25_Y17 10 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X25_Y17; Fanout = 10; REG Node = 'count\[1\]'" {  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "" { count[1] } "NODE_NAME" } "" } } { "rei2c.vhd" "" { Text "E:/Work/camera/software/eeprom/rei2c/rei2c.vhd" 31 -1 0 } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.770 ns) + CELL(0.522 ns) 1.292 ns process1~103 2 COMB LAB_X25_Y19 1 " "Info: 2: + IC(0.770 ns) + CELL(0.522 ns) = 1.292 ns; Loc. = LAB_X25_Y19; Fanout = 1; COMB Node = 'process1~103'" {  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "1.292 ns" { count[1] process1~103 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.732 ns) + CELL(0.522 ns) 2.546 ns process1~104 3 COMB LAB_X25_Y18 1 " "Info: 3: + IC(0.732 ns) + CELL(0.522 ns) = 2.546 ns; Loc. = LAB_X25_Y18; Fanout = 1; COMB Node = 'process1~104'" {  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "1.254 ns" { process1~103 process1~104 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.817 ns) + CELL(0.390 ns) 3.753 ns process1~105 4 COMB LAB_X24_Y17 2 " "Info: 4: + IC(0.817 ns) + CELL(0.390 ns) = 3.753 ns; Loc. = LAB_X24_Y17; Fanout = 2; COMB Node = 'process1~105'" {  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "1.207 ns" { process1~104 process1~105 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.385 ns) + CELL(0.767 ns) 4.905 ns sda~reg0 5 REG LAB_X24_Y17 1 " "Info: 5: + IC(0.385 ns) + CELL(0.767 ns) = 4.905 ns; Loc. = LAB_X24_Y17; Fanout = 1; REG Node = 'sda~reg0'" {  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "1.152 ns" { process1~105 sda~reg0 } "NODE_NAME" } "" } } { "rei2c.vhd" "" { Text "E:/Work/camera/software/eeprom/rei2c/rei2c.vhd" 46 -1 0 } }  } 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.201 ns 44.87 % " "Info: Total cell delay = 2.201 ns ( 44.87 % )" {  } {  } 0} { "Info" "ITDB_TOTAL_IC_DELAY" "2.704 ns 55.13 % " "Info: Total interconnect delay = 2.704 ns ( 55.13 % )" {  } {  } 0}  } { { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "4.905 ns" { count[1] process1~103 process1~104 process1~105 sda~reg0 } "NODE_NAME" } "" } }  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 2 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 2%." {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0}
{ "Info" "IFSAC_FSAC_ALL_OUTPUT_ENABLE_GROUPS" "" "Info: The following groups of pins have the same output enable" { { "Info" "IFSAC_FSAC_SAME_OUTPUT_ENABLE_GROUP" "process1~3 " "Info: The following pins have the same output enable: process1~3" { { "Info" "IFSAC_FSAC_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional sda LVTTL " "Info: Type bidirectional pin sda uses the LVTTL I/O standard" {  } { { "rei2c.vhd" "" { Text "E:/Work/camera/software/eeprom/rei2c/rei2c.vhd" 13 -1 0 } } { "d:/altera/bin/Assignment Editor.qase" "" { Assignment "d:/altera/bin/Assignment Editor.qase" 1 { { 0 "sda" } } } } { "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" "" { Report "E:/Work/camera/software/eeprom/rei2c/db/rei2c_cmp.qrpt" Compiler "rei2c" "UNKNOWN" "V1" "E:/Work/camera/software/eeprom/rei2c/db/rei2c.quartus_db" { Floorplan "E:/Work/camera/software/eeprom/rei2c/" "" "" { sda } "NODE_NAME" } "" } } { "E:/Work/camera/software/eeprom/rei2c/rei2c.fld" "" { Floorplan "E:/Work/camera/software/eeprom/rei2c/rei2c.fld" "" "" { sda } "NODE_NAME" } }  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Mon Jul 24 14:39:59 2006 " "Info: Processing ended: Mon Jul 24 14:39:59 2006" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:10 " "Info: Elapsed time: 00:00:10" {  } {  } 0}  } {  } 0}