epptop.fit.qmsg

在altera fpga中实现epp模式的并口通信程序

{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2125 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2125\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3335 " "Info: Error on line number 3335 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3335 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2104 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2104\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3339 " "Info: Error on line number 3339 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3339 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2121 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2121\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3342 " "Info: Error on line number 3342 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3342 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3346 ram_dp_ar_aw:m1\|data_1_out~2119 DATAF " "Info: Error on line 3346 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_1_out~2119\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3346 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2119 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2119\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3346 " "Info: Error on line number 3346 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3346 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3369 ram_dp_ar_aw:m1\|data_1_out~2119 DATAE " "Info: Error on line 3369 of Routing Constraints File. Can't use route port DATAE with atom \"ram_dp_ar_aw:m1\|data_1_out~2119\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3369 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|data_1_out~2119 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2119\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3369 " "Info: Error on line number 3369 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3369 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3387 ram_dp_ar_aw:m1\|data_1_out~2122 DATAE " "Info: Error on line 3387 of Routing Constraints File. Can't use route port DATAE with atom \"ram_dp_ar_aw:m1\|data_1_out~2122\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3387 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|data_1_out~2122 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2122\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3387 " "Info: Error on line number 3387 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3387 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3404 ram_dp_ar_aw:m1\|data_1_out~2113 DATAE " "Info: Error on line 3404 of Routing Constraints File. Can't use route port DATAE with atom \"ram_dp_ar_aw:m1\|data_1_out~2113\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3404 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|data_1_out~2113 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2113\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3403 " "Info: Error on line number 3403 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3403 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|mem\[6\]\[2\]~3358 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|mem\[6\]\[2\]~3358\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3407 " "Info: Error on line number 3407 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3407 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|data_1_out~2114 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2114\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3410 " "Info: Error on line number 3410 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3410 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[1\] ram_dp_ar_aw:m1\|data_1_out~2105 " "Info: Can't route signal \"SRAMADDR\[1\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2105\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3413 " "Info: Error on line number 3413 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3413 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 2 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 2%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X37_Y25 X49_Y37 " "Info: The peak interconnect region extends from location X37_Y25 to location X49_Y37" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to locat