epptop.fit.qmsg

在altera fpga中实现epp模式的并口通信程序

{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2110 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2110\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3282 " "Info: Error on line number 3282 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3282 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2107 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2107\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3285 " "Info: Error on line number 3285 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3285 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3292 ram_dp_ar_aw:m1\|data_1_out~2113 DATAF " "Info: Error on line 3292 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_1_out~2113\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3292 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2113 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2113\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3288 " "Info: Error on line number 3288 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3288 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|mem\[5\]\[4\]~3354 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|mem\[5\]\[4\]~3354\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3295 " "Info: Error on line number 3295 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3295 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|mem\[6\]\[2\]~3358 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|mem\[6\]\[2\]~3358\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3298 " "Info: Error on line number 3298 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3298 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2106 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2106\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3301 " "Info: Error on line number 3301 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3301 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|mem\[1\]\[2\]~3355 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|mem\[1\]\[2\]~3355\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3304 " "Info: Error on line number 3304 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3304 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2115 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2115\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3307 " "Info: Error on line number 3307 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3307 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2116 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2116\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3310 " "Info: Error on line number 3310 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3310 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2127 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2127\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3314 " "Info: Error on line number 3314 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3314 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2124 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2124\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3319 " "Info: Error on line number 3319 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3319 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2112 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2112\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3322 " "Info: Error on line number 3322 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3322 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2109 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2109\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3325 " "Info: Error on line number 3325 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3325 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2118 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2118\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3328 " "Info: Error on line number 3328 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3328 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}