epptop.fit.qmsg

在altera fpga中实现epp模式的并口通信程序

{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[1\]~161 ram_dp_ar_aw:m1\|data_0_out~1235 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[1\]~161\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1235\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1605 " "Info: Error on line number 1605 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1605 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[1\]~161 ram_dp_ar_aw:m1\|data_0_out~1238 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[1\]~161\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1238\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1608 " "Info: Error on line number 1608 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1608 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "1612 ram_dp_ar_aw:m1\|data_0_out~1241 DATAE " "Info: Error on line 1612 of Routing Constraints File. Can't use route port DATAE with atom \"ram_dp_ar_aw:m1\|data_0_out~1241\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1612 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[1\]~161 ram_dp_ar_aw:m1\|data_0_out~1241 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[1\]~161\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1241\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1611 " "Info: Error on line number 1611 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1611 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "1644 ram_dp_ar_aw:m1\|data_0_out~1250 DATAF " "Info: Error on line 1644 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_0_out~1250\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1644 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1250 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1250\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1642 " "Info: Error on line number 1642 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1642 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1235 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1235\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1647 " "Info: Error on line number 1647 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1647 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1238 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1238\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1650 " "Info: Error on line number 1650 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1650 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1229 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1229\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1653 " "Info: Error on line number 1653 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1653 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "1666 ram_dp_ar_aw:m1\|data_0_out~1247 DATAF " "Info: Error on line 1666 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_0_out~1247\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1666 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1247 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1247\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1665 " "Info: Error on line number 1665 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1665 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "1689 ram_dp_ar_aw:m1\|data_0_out~1241 DATAF " "Info: Error on line 1689 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_0_out~1241\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1689 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "EPP2SRAM:M0\|SRAM_ADDR\[2\]~162 ram_dp_ar_aw:m1\|data_0_out~1241 " "Info: Can't route signal \"EPP2SRAM:M0\|SRAM_ADDR\[2\]~162\" to atom \"ram_dp_ar_aw:m1\|data_0_out~1241\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "1689 " "Info: Error on line number 1689 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 1689 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_RCF_SPECIFIED_ROUTE_PORT_ON_ALUT_CANNOT_BE_USED_IN_THIS_MODE" "3279 ram_dp_ar_aw:m1\|data_1_out~2122 DATAF " "Info: Error on line 3279 of Routing Constraints File. Can't use route port DATAF with atom \"ram_dp_ar_aw:m1\|data_1_out~2122\" due to atom's current configuration" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3279 1 0 } }  } 0 0 "Error on line %1!d! of Routing Constraints File. Can't use route port %3!s! with atom \"%2!s!\" due to atom's current configuration" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_STATUS_FAILED_DISCONNECTED_RR_GRAPH" "SRAMADDR\[2\] ram_dp_ar_aw:m1\|data_1_out~2122 " "Info: Can't route signal \"SRAMADDR\[2\]\" to atom \"ram_dp_ar_aw:m1\|data_1_out~2122\"" { { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_USED_FOR_THIS_CONNECTION" "" "Info: Routing for this connection is constrained" {  } {  } 0 0 "Routing for this connection is constrained" 0 0} { "Info" "IFITAPI_FITAPI_VPR_CONSTRAINED_ROUTING_CONSTRAINT_STEP" "3272 " "Info: Error on line number 3272 in Routing Constraints File" {  } { { "EPPTOP.rcf" "" { Text "D:/montage/verilog code/EPPTOP V1.0/EPPTOP.rcf" 3272 1 0 } }  } 0 0 "Error on line number %1!d! in Routing Constraints File" 0 0} { "Info" "IFITAPI_FITAPI_VPR_RCF_REMOVE_WRONG_ROUTING_CONSTRAINT_AND_KEEP_ROUTING" "" "Info: To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" {  } {  } 0 0 "To finish routing, the Quartus II software will remove the routing constraints for this fan-out and will make another attempt at routing this fan-out after all other fan-outs of this signal are routed" 0 0}  } {  } 0 0 "Can't route signal \"%1!s!\" to atom \"%2!s!\"" 0 0}