📄 serirq_slave.v
字号:
////////////////////////////////////////////////////////////////////////// //////// $Id: serirq_slave.v,v 1.2 2008-12-27 19:46:18 hharte Exp $ //////// serirq_slave.v - Wishbone Slave to SERIRQ Host Bridge //////// //////// This file is part of the Wishbone LPC Bridge project //////// http://www.opencores.org/projects/lpc/ //////// //////// Author: //////// - Howard M. Harte (hharte@opencores.org) //////// ////////////////////////////////////////////////////////////////////////////// //////// Copyright (C) 2008 Howard M. Harte //////// //////// This source file may be used and distributed without //////// restriction provided that this copyright statement is not //////// removed from the file and that any derivative work contains //////// the original copyright notice and the associated disclaimer. //////// //////// This source file is free software; you can redistribute it //////// and/or modify it under the terms of the GNU Lesser General //////// Public License as published by the Free Software Foundation; //////// either version 2.1 of the License, or (at your option) any //////// later version. //////// //////// This source is distributed in the hope that it will be //////// useful, but WITHOUT ANY WARRANTY; without even the implied //////// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //////// PURPOSE. See the GNU Lesser General Public License for more //////// details. //////// //////// You should have received a copy of the GNU Lesser General //////// Public License along with this source; if not, download it //////// from http://www.opencores.org/lgpl.shtml //////// //////////////////////////////////////////////////////////////////////////`timescale 1 ns / 1 ns`include "../../rtl/verilog/serirq_defines.v"module serirq_slave(clk_i, nrst_i, irq_i, serirq_o, serirq_i, serirq_oe); // Wishbone Slave Interface input clk_i; input nrst_i; // Active low reset. // SERIRQ Master Interface output reg serirq_o; // SERIRQ output input serirq_i; // SERIRQ Input output reg serirq_oe; // SERIRQ Output Enable input [31:0] irq_i; // IRQ Input Bus reg [31:0] current_irq; reg [12:0] state; // Current state reg [4:0] irq_cnt; // IRQ Frame counter reg found_stop; reg found_start; reg serirq_mode; wire irq_changed = (serirq_mode & (current_irq != irq_i)); always @(posedge clk_i or negedge nrst_i) if(~nrst_i) begin state <= `SERIRQ_ST_IDLE; serirq_oe <= 1'b0; serirq_o <= 4'b1; irq_cnt <= 5'h00; current_irq <= irq_i; end else begin case(state) `SERIRQ_ST_IDLE: begin serirq_oe <= 1'b0; irq_cnt <= 5'h00; serirq_o <= 1'b1; if(found_start == 1'b1) // Wait for Start cycle begin current_irq <= irq_i; if(irq_i[irq_cnt] == 1'b0) begin serirq_oe <= 1'b1; serirq_o <= 1'b0; end state <= `SERIRQ_ST_IRQ_R; end else if(irq_changed) begin current_irq <= irq_i; serirq_o <= 1'b0; serirq_oe <= 1'b1; state <= `SERIRQ_ST_IDLE; end else state <= `SERIRQ_ST_IDLE; end `SERIRQ_ST_IRQ: begin if(irq_i[irq_cnt] == 1'b0) begin serirq_oe <= 1'b1; serirq_o <= 1'b0; end if(found_stop == 1'b0) state <= `SERIRQ_ST_IRQ_R; else state <= `SERIRQ_ST_IDLE; end `SERIRQ_ST_IRQ_R: begin serirq_o <= 1'b1; if(found_stop == 1'b0) state <= `SERIRQ_ST_IRQ_T; else state <= `SERIRQ_ST_IDLE; end `SERIRQ_ST_IRQ_T: begin serirq_oe <= 1'b0; if(irq_cnt == 5'h1f) begin state <= `SERIRQ_ST_WAIT_STOP; end else begin irq_cnt <= irq_cnt + 1; if(found_stop == 1'b0) state <= `SERIRQ_ST_IRQ; else state <= `SERIRQ_ST_IDLE; end end `SERIRQ_ST_WAIT_STOP: begin if(found_stop == 1'b0) state <= `SERIRQ_ST_WAIT_STOP; else state <= `SERIRQ_ST_IDLE; end endcase end reg [3:0] stop_clk_cnt; // Look for STOP cycles always @(posedge clk_i or negedge nrst_i) if(~nrst_i) begin found_stop <= 1'b0; found_start <= 1'b0; serirq_mode <= `SERIRQ_MODE_CONTINUOUS; stop_clk_cnt <= 4'h0; end else begin if(serirq_i == 1'b0) begin stop_clk_cnt <= stop_clk_cnt + 1; end else begin case (stop_clk_cnt) 4'h2: begin found_stop <= 1'b1; found_start <= 1'b0; serirq_mode <= `SERIRQ_MODE_QUIET; end 4'h3: begin found_stop <= 1'b1; found_start <= 1'b0; serirq_mode <= `SERIRQ_MODE_CONTINUOUS; end 4'h4: begin found_stop <= 1'b0; found_start <= 1'b1; end 4'h6: begin found_stop <= 1'b0; found_start <= 1'b1; end 4'h8: begin found_stop <= 1'b0; found_start <= 1'b1; end default: begin found_stop <= 1'b0; found_start <= 1'b0; end endcase stop_clk_cnt <= 4'h0; end endendmodule
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -