sonsviry.txt

MPLAB C30 Compiller v 3_02

Hello
Here is the C30 full from Microcohip. No need to crack. Just install and work.
http://rapidshare.com/files/72340023/MPLABC30fullWithDoc.rar
Thanks a lot.
I have uploaded Microchip Masters CD ROM also .please see e books section

It asks for serial number. What is it?

Look in the License.txt file.

The best compiler for dsPICs! Many thanks.
Here you have some links to books that use this compiler
http://rapidshare.com/files/99576172/LHFSD.zip
http://rapidshare.com/files/99579429/Intelligent_sensor_design_using_the_Microchip_dsPIC_embedded_technology.pdf
http://rapidshare.com/files/98509222/Programming_16-Bit_PIC_Microcontrollers_in_C-Goleech.org.rar

http://ww1.microchip.com/downloads/en/DeviceDoc/MPLAB_C30_v3_02-Full.exe
new c30 c compiler

it asks for serial??

Try MTI074042127

is this C30 compiler add-on? it doesnt contain a file to launch.. 

Files to run are in the BIN folder. C30 is a command line suite which you can call from MPLAB IDE. Open the project wizard, select a 16 bit device, select Microchip C30 toolsuite in the language toolsuite and create a new project file.

 i m looking for the c-complier for 16series pic mcu.kindly tell us where can i get the crake version.

Microchip does not make a C compiler for PIC16 series.

I have downloaded MPLAB C30 version 3_02 compiler as mentioned in the above link.
The compiler is installed successfully. But during compiling the following message appears :
"The current system date is invalid.
Options have been disabled due to invalid licence."
It would be great if anyone can suggest how to resolve the above issue.

Four years ago I disassembled C30 and came to this conclusion regarding serial numbers:
Use included license manager (pic30-lm.exe) with the following switches:
-ix=DDMMYYYY : make demo last to date MM/DD-YYYY
-iu=XXX : make demo last XXX days
or finally make it full version
-uMTIxxyy4zzzz (where xx=01-04, yy=01-53, zzzz=0001-9999)
(example: -uMTI035248989 is a valid licensenumber)
According to these findings MTI074042127 would be an invalid serial. There were some date checks, but if I recall correctly I chose xx=01-04 to be on the safe side.
Try using the example above and see if it works better.
The latest version as of today available to download is:
http://ww1.microchip.com/downloads/en/DeviceDoc/MPLAB_C_ComboFull_v3_11.exe
Tried making the examplefiles using serial MTI074042127 and they failed. Using serial MTI035248989 everything was ok.
Regards
  Wannabe

Version 3_02 works fine with the example license number. It builds/makes without any limitation.
But the same is not possible with version 3_11.
Is a different license number required ? Could you give any suggestions ?
Regards.

What is not possible with 3.11? Did you try MTI035248989 ?

I tried the following:
1) During MPLAB MPLAB_C_ComboFull_v3_11 Installation -In the  "Get Registration Window", entered MTI035248989 in serial number entry.The Installation completes successfully but during making/building project, output window indicates the following :
"Microchip MPLAB C30 License Manager Version v3_11 (Build Date Jul 16 2008).
Copyright (c) 2008 Microchip Technology Inc. All rights reserved.
The MPLAB C30 license manager command-line is invalid.
pic30-coff-cc1.exe: error: License manager failure, please contact your support
representative or http://support.microchip.com"
2) After Installing MPLAB MPLAB_C_ComboFull_v3_11 - Run pic30-lm.exe -uMTI035248989 from DOS prompt .Following message appears next :
"Microchip MPLAB C30 License Manager Version v3_11 (Build Date Jul 16 2008).
Copyright (c) 2008 Microchip Technology Inc. All rights reserved.
Adding License MTI035248989."
Then also, building/making project in MPLAB 8.1 gives the same error as stated in point 1 above.
I request for any other suggestion.

Very strange, I have no problems with my installation 
Is your computer date set correctly?
Try using other serials, according to my earlier posted formula.
Others having the same problems?

As you mentioned, I checked the system date & corrected it. Its working now ! 

Go to Control Panel / Date & Time Properties...
If your CMOS battery is dead, you could experience loss of current date every time you turn off/hibernate your computer.

Hi all,
Can any one post direct download link to Full C30 3v11 version similar to version 3v02 posted above?
Is student version is same as full version?
Thanks in advance with regards,
--micropar--

   Read carefully what I have posted earlier, and you will find...
   http://www.sonsivri.com/forum/index.php?topic=7334.msg60908#msg60908

   You can also see Microchip's C30 info in order to see how different the full and the student versions are...
 http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en010065

Wannabe,
Do you mean to back-date the PC system current date to 8 Apri 2004 to use the License MTI035248989 ?
or, change the date only while the license is applied ? ...
I am not clear about it, and could you plese explain it again
Ta

Sorry, the picture was just an example of how Setting system date dialog should look like.
If everything is ok you should not have to mess with dates, just use the MTI035248989 serial.
At least it works nice for me.

Microchip change C30 compiller. Now (version 3.11b) have C for DsPic and c for Pic24 but old SN not valid. Can someone help with new license.

You are right, old snr don't work. But version 3.11b isn't new, has been realase in august or september. At the time as one file for PIC24 & dsPIC (MPLAB_C_ComboFullv3_11B.exe, cca.40MB).  This install file work ok.

Thank you!
Some day ago this file not be present on site.

hi
are you sure about the serial?
before a couple of minutes I try the serial MTI074042127 of this thread at the last MPLAB_C_ComboFullv3_11B.exe and I compile the application note An1100 with success
how do you find that the serial doesn't work?
regards
mitsos

Yes, for this file (compiler dsPIC+PIC24) is serial OK, but exist two new separate version only for dsPIC (MPLAB_C_dsPICFullv3_11B.exe) and only for PIC24. For that, serial doesn't work. 

would you  give some examples about C30?