sat-teledesic.tcl

跑leach需要的

#
# Copyright (c) 1999 Regents of the University of California.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#       This product includes software developed by the MASH Research
#       Group at the University of California Berkeley.
# 4. Neither the name of the University nor of the Research Group may be
#    used to endorse or promote products derived from this software without
#    specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# Contributed by Tom Henderson, UCB Daedalus Research Group, June 1999
#
# $Header: /nfs/jade/vint/CVSROOT/ns-2/tcl/ex/sat-teledesic.tcl,v 1.5 2002/06/12 04:43:13 tomh Exp $
#
# Example of a broadband LEO constellation with orbital configuration
# similar to that of Teledesic's 288 satellite configuration.  The script 
# sets up two terminals (one in # Boston, one at Berkeley) and sends a 
# packet from Berkeley to Boston every second for a whole day-- the script 
# illustrates how the latency due to propagation delay changes depending 
# on the satellite configuration.
#
# This script relies on sourcing two additional files:
# - sat-teledesic-nodes.tcl
# - sat-teledesic-links.tcl
#
# 12 planes, 24 satellites per plane
# Altitude = 1375 km
# Orbital period = 6794 sec
# intersatellite separation = 360/24 = 15 deg
# interplane separation = 15 deg (guess)
# seam separation = 15 deg (guess)
# inclination = 84.7
# eccentricity =  0.0018 (not modelled; from original 840 bird design)
# minimum elevation angle at edge of coverage = (approx) 40 deg
# ISL cross-link pattern:  4 intraplane, 4 interplane except 3 at the seam
# ISL cross-seam pattern:  only one across the seam; one link is active
#   while the other participates in acquiring the next node for handoff

global ns
set ns [new Simulator]

# Global configuration parameters
Node/SatNode set time_advance_ 0
HandoffManager/Term set elevation_mask_ 40 
HandoffManager/Term set term_handoff_int_ 10
HandoffManager/Sat set sat_handoff_int_ 10
HandoffManager/Sat set latitude_threshold_ 60
HandoffManager/Sat set longitude_threshold_ 8
HandoffManager set handoff_randomization_ true
SatRouteObject set metric_delay_ true
# Set this to false if opt(wiredRouting) == ON below
SatRouteObject set data_driven_computation_ true
# "ns-random 0" sets seed heuristically; other integers are deterministic
ns-random 1
Agent set ttl_ 32; # Should be > than max diameter in network

global opt
set opt(chan)           Channel/Sat
set opt(bw_down)        1.5Mb; # Downlink bandwidth (satellite to ground)
set opt(bw_up)          1.5Mb; # Uplink bandwidth
set opt(bw_isl)         155Mb
set opt(phy)            Phy/Sat
set opt(mac)            Mac/Sat
set opt(ifq)            Queue/DropTail
set opt(qlim)           50
set opt(ll)             LL/Sat
set opt(wiredRouting)	OFF

set opt(alt)            1375; # Polar satellite altitude (Iridium)
set opt(inc)            84.7; # Orbit inclination w.r.t. equator

# XXX Tracing enabling must precede link creation !
# and satellite classifiers, if tracing is to work
set outfile [open out.tr w]
$ns trace-all $outfile

# Configure satellite nodes 
$ns node-config -satNodeType polar \
		-llType $opt(ll) \
		-ifqType $opt(ifq) \
		-ifqLen $opt(qlim) \
		-macType $opt(mac) \
		-phyType $opt(phy) \
		-channelType $opt(chan) \
		-downlinkBW $opt(bw_down) \
		-wiredRouting $opt(wiredRouting)

set alt $opt(alt)
set inc $opt(inc)

# Nodes n(100) - n(1223) are satellite nodes
source sat-teledesic-nodes.tcl

# configure the ISLs
source sat-teledesic-links.tcl

# Set up terminals
$ns node-config -satNodeType terminal
set n100 [$ns node]
$n100 set-position 37.9 -122.3; # Berkeley
set n101 [$ns node]
$n101 set-position 42.3 -71.1; # Boston

# Add GSL links
# It doesn't matter what the sat node is (handoff algorithm will reset it)
$n100 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \
  $opt(phy) [$n(100) set downlink_] [$n(100) set uplink_]
$n101 add-gsl polar $opt(ll) $opt(ifq) $opt(qlim) $opt(mac) $opt(bw_up) \
  $opt(phy) [$n(100) set downlink_] [$n(100) set uplink_]

# Trace all queues
$ns trace-all-satlinks $outfile

# Attach agents
set udp0 [new Agent/UDP]
$ns attach-agent $n100 $udp0
set cbr0 [new Application/Traffic/CBR]
$cbr0 attach-agent $udp0
$cbr0 set interval_ 60

set null0 [new Agent/Null]
$ns attach-agent $n101 $null0

$ns connect $udp0 $null0
$ns at 1.0 "$cbr0 start"

# We're using a centralized routing genie-- create and start it here
set satrouteobject_ [new SatRouteObject]
$satrouteobject_ suppress_initial_computation 
$ns at 0.5 "$satrouteobject_ compute_routes"; # anytime before data is sent

$ns at 86400.0 "finish" ; # one earth rotation 

proc finish {} {
	global ns outfile 
	$ns flush-trace
	close $outfile

	exit 0
}

$ns run