sin.c

函数信号发生器程序

///////////////////////////////////////////////////
//简易正弦波发生器
//精英团队提供
//控制信号    ：P20
//数据线      ：P0口
///////////////////////////////////////////////////
#include <reg52.h> 
sbit WR2 = P2 ^ 0; 
unsigned char code sin[256]=     //正弦表
	{
	0x80,0x83,0x86,0x89,0x8d,0x90,0x93,0x96,0x99,0x9c,0x9f,0xa2,0xa5,0xa8,0xab,0xae,0xb1,0xb4,0xb7,0xba,0xbc,0xbf,0xc2,0xc5, 
	0xc7,0xca,0xcc,0xcf,0xd1,0xd4,0xd6,0xd8,0xda,0xdd,0xdf,0xe1,0xe3,0xe5,0xe7,0xe9,0xea,0xec,0xee,0xef,0xf1,0xf2,0xf4,0xf5, 
	0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd, 
	0xfd,0xfc,0xfb,0xfa,0xf9,0xf8,0xf7,0xf6,0xf5,0xf4,0xf2,0xf1,0xef,0xee,0xec,0xea,0xe9,0xe7,0xe5,0xe3,0xe1,0xde,0xdd,0xda, 
	0xd8,0xd6,0xd4,0xd1,0xcf,0xcc,0xca,0xc7,0xc5,0xc2,0xbf,0xbc,0xba,0xb7,0xb4,0xb1,0xae,0xab,0xa8,0xa5,0xa2,0x9f,0x9c,0x99,
	0x96,0x93,0x90,0x8d,0x89,0x86,0x83,0x80,0x80,0x7c,0x79,0x76,0x72,0x6f,0x6c,0x69,0x66,0x63,0x60,0x5d,0x5a,0x57,0x55,0x51, 
	0x4e,0x4c,0x48,0x45,0x43,0x40,0x3d,0x3a,0x38,0x35,0x33,0x30,0x2e,0x2b,0x29,0x27,0x25,0x22,0x20,0x1e,0x1c,0x1a,0x18,0x16, 
	0x15,0x13,0x11,0x10,0x0e,0x0d,0x0b,0x0a,0x09,0x08,0x07,0x06,0x05,0x04,0x03,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00, 
	0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0d,0x0e,0x10,0x11,0x13,0x15, 
	0x16,0x18,0x1a,0x1c,0x1e,0x20,0x22,0x25,0x27,0x29,0x2b,0x2e,0x30,0x33,0x35,0x38,0x3a,0x3d,0x40,0x43,0x45,0x48,0x4c,0x4e, 
	0x51,0x55,0x57,0x5a,0x5d,0x60,0x63,0x66,0x69,0x6c,0x6f,0x72,0x76,0x79,0x7c,0x80
	}; 
///////////////////////////////////////////////////
void Delay_1ms(unsigned char t)//精确延时子程序，延时 1MS*t S
{
	unsigned char a;
	while(--t != 0)
	{
		for(a = 0; a < 125; a++);
	}
}
////////////////////////////////////////////////////
void Delay(unsigned long time)
{
    while(time--);
}
///////////////////////////////////////////////////
void DAC(unsigned char dat)
{
    WR2=1;
	
	P0=dat;
	Delay(5);
	WR2=0;
	Delay(5);
	WR2=1;
	Delay(5);
	

}
///////////////////////////////////////////////////
void main(void) 
{ 
	unsigned int i;
	WR2=1;
	
	while(1)
	{
		for(i=0;i<256;i++)
		   { DAC(sin[i]);Delay_1ms(10);}//改变延时即可改变正弦波的频率
	} 
 
}
///////////////////////////////////////////////////