sdmmc_mci.c

at91sam7a3 keil下sdcard驱动

    if( (R1 & R1_SPI_IDLE)==R1_SPI_IDLE) {
        TRACE_DEBUG("R1_SPI_IDLE\n\r");
    }
    if( (R1 & R1_SPI_ERASE_RESET)==R1_SPI_ERASE_RESET) {
        TRACE_DEBUG("R1_SPI_ERASE_RESET\n\r");
    }
    if( (R1 & R1_SPI_ILLEGAL_COMMAND)==R1_SPI_ILLEGAL_COMMAND) {
        TRACE_DEBUG("R1_SPI_ILLEGAL_COMMAND\n\r");
    }
    if( (R1 & R1_SPI_COM_CRC)==R1_SPI_COM_CRC) {
        TRACE_DEBUG("R1_SPI_COM_CRC\n\r");
    }
    if( (R1 & R1_SPI_ERASE_SEQ)==R1_SPI_ERASE_SEQ) {
        TRACE_DEBUG("R1_SPI_ERASE_SEQ\n\r");
    }
    if( (R1 & R1_SPI_ADDRESS)==R1_SPI_ADDRESS) {
        TRACE_DEBUG("R1_SPI_ADDRESS\n\r");
    }
    if( (R1 & R1_SPI_PARAMETER)==R1_SPI_PARAMETER) {
        TRACE_DEBUG("R1_SPI_PARAMETER\n\r");
    }
}

//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
void DecodeR2(unsigned char R2)
{
    if( (R2 & R2_SPI_CARD_LOCKED)==R2_SPI_CARD_LOCKED) {
        TRACE_DEBUG("R2_SPI_CARD_LOCKED\n\r");
    }
    if( (R2 & R2_SPI_WP_ERASE_SKIP)==R2_SPI_WP_ERASE_SKIP) {
        TRACE_DEBUG("R2_SPI_WP_ERASE_SKIP/R2_SPI_LOCK_UNLOCK_FAIL\n\r");
    }
    if( (R2 & R2_SPI_ERROR)==R2_SPI_ERROR) {
        TRACE_DEBUG("R2_SPI_ERROR\n\r");
    }
    if( (R2 & R2_SPI_CC_ERROR)==R2_SPI_CC_ERROR) {
        TRACE_DEBUG("R2_SPI_CC_ERROR\n\r");
    }
    if( (R2 & R2_SPI_CARD_ECC_ERROR)==R2_SPI_CARD_ECC_ERROR) {
        TRACE_DEBUG("R2_SPI_CARD_ECC_ERROR\n\r");
    }
    if( (R2 & R2_SPI_WP_VIOLATION)==R2_SPI_WP_VIOLATION) {
        TRACE_DEBUG("R2_SPI_WP_VIOLATION\n\r");
    }
    if( (R2 & R2_SPI_ERASE_PARAM)==R2_SPI_ERASE_PARAM) {
        TRACE_DEBUG("R2_SPI_ERASE_PARAM\n\r");
    }
    if( (R2 & R2_SPI_OUT_OF_RANGE)==R2_SPI_OUT_OF_RANGE) {
        TRACE_DEBUG("R2_SPI_OUT_OF_RANGE/R2_SPI_CSD_OVERWRITE\n\r");
    }
}

//------------------------------------------------------------------------------
/// Initialization delay: The maximum of 1 msec, 74 clock cycles and supply ramp
/// up time.
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SdCard driver instance.
//------------------------------------------------------------------------------
static unsigned char Pon(SdCard *pSd)
{
    SdCmd *pCommand = &(pSd->command);
    unsigned int response;
    unsigned char error;

    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_POWER_ON_INIT;
    pCommand->pResp = &response;

    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // Send command
    error =  SendCommand(pSd);
    return error;
}

//------------------------------------------------------------------------------
/// Resets all cards to idle state
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SdCard driver instance.
//------------------------------------------------------------------------------
static unsigned char Cmd0(SdCard *pSd)
{
    SdCmd *pCommand = &(pSd->command);
    unsigned int response;
    unsigned char error;

    TRACE_DEBUG("Cmd0()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_GO_IDLE_STATE_CMD;
    pCommand->pResp = &response;

    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // send command
    error =  SendCommand(pSd);
    return error;
}

//------------------------------------------------------------------------------
/// MMC send operation condition command.
/// Sends host capacity support information and activates the card's
/// initialization process.
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SdCard driver instance.
//------------------------------------------------------------------------------
static unsigned char Cmd1(SdCard *pSd)
{
    SdCmd *pCommand = &(pSd->command);
    unsigned char error;
    unsigned int response;

    TRACE_DEBUG("Cmd1()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_MMC_SEND_OP_COND_CMD;
    pCommand->arg = AT91C_MMC_HOST_VOLTAGE_RANGE;
    pCommand->resType = 3;
    pCommand->pResp = &response;

    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // send command
    error = SendCommand(pSd);
    if (error) {
        return error;
    }
    if ((response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY) {
        return 0;
    }
    else {
        return SD_ERROR_DRIVER;
    }
}

//------------------------------------------------------------------------------
/// Asks any card to send the CID numbers
/// on the CMD line (any card that is
/// connected to the host will respond)
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SD card driver instance.
/// \param pCid  Buffer for storing the CID numbers.
//------------------------------------------------------------------------------
static unsigned char Cmd2(SdCard *pSd, unsigned int *pCid)
{
    SdCmd *pCommand = &(pSd->command);

    TRACE_DEBUG("Cmd2()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill the command information
    pCommand->cmd = AT91C_ALL_SEND_CID_CMD;
    pCommand->resType = 2;
    pCommand->pResp = pCid;
    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // Send the command
    return SendCommand(pSd);
}

//------------------------------------------------------------------------------
/// Ask the card to publish a new relative address (RCA)
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SD card driver instance.
//------------------------------------------------------------------------------
static unsigned char Cmd3(SdCard *pSd)
{
    SdCmd *pCommand = &(pSd->command);
    unsigned int cardAddress;
    unsigned char error;

    TRACE_DEBUG("Cmd3()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_SET_RELATIVE_ADDR_CMD;
    // Assign relative address to MMC card
    if (pSd->cardType == CARD_MMC) {
        pCommand->arg = (0x1 << 16);
    }
    pCommand->resType = 1;
    pCommand->pResp = &cardAddress;
    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // Send command
    error = SendCommand(pSd);
    if (error) {
        return error;
    }

    // Save card address in driver
    if (pSd->cardType != CARD_MMC) {
        pSd->cardAddress = (cardAddress >> 16) & 0xFFFF;
    }
    else {
        // Default MMC RCA is 0x0001
        pSd->cardAddress = 1;
    }

    return 0;
}

//------------------------------------------------------------------------------
/// Command toggles a card between the
/// stand-by and transfer states or between
/// the programming and disconnect states.
/// Returns the command transfer result (see SendCommand).
/// \param pSd  Pointer to a SD card driver instance.
/// \param address  Relative Card Address (0 deselects all).
//------------------------------------------------------------------------------
static unsigned char Cmd7(SdCard *pSd, unsigned int address)
{
    SdCmd *pCommand = &(pSd->command);

    TRACE_DEBUG("Cmd7()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_SEL_DESEL_CARD_CMD;
    pCommand->arg = address << 16;
    pCommand->resType = 1;
    // Set SD command state
    pSd->state = SD_STATE_STBY;

    // Send command
    return SendCommand(pSd);
}

//------------------------------------------------------------------------------
/// Sends SD Memory Card interface
/// condition, which includes host supply
/// voltage information and asks the card
/// whether card supports voltage.
/// Returns 0 if successful; otherwise returns SD_ERROR_NORESPONSE if the card did
/// not answer the command, or SD_ERROR_DRIVER.
/// \param pSd  Pointer to a SD card driver instance.
/// \param supplyVoltage  Expected supply voltage.
//------------------------------------------------------------------------------
static unsigned char Cmd8(SdCard *pSd, unsigned char supplyVoltage)
{
    SdCmd *pCommand = &(pSd->command);
    unsigned int response[2];
    unsigned char error;

    TRACE_DEBUG("Cmd8()\n\r");
    memset(pCommand, 0, sizeof(SdCmd));
    // Fill command information
    pCommand->cmd = AT91C_SEND_IF_COND;
    pCommand->arg = (supplyVoltage << 8) | (0xAA);
    pCommand->resType = 7;
    pCommand->pResp = &response[0];
    // Set SD command state
    pSd->state = SD_STATE_STBY;

    TRACE_DEBUG("supplyVoltage: 0x%x\n\r", supplyVoltage);

    // Send command
    error = SendCommand(pSd);

    // Check result
    if (error == MCI_STATUS_NORESPONSE) {
        return SD_ERROR_NORESPONSE;
    }
    // SD_R7
    // Bit 0 - 7: check pattern
    // Bit 8 -11: voltage accepted
    else if (!error && ((response[0] & 0x00000FFF) == ((supplyVoltage << 8) | 0xAA))) {
        return 0;
    }
    else {
        return SD_ERROR_DRIVER;
    }
}

//------------------------------------------------------------------------------