errnomodule.c

python s60 1.4.5版本的源代码

#endif
#ifdef ESPIPE
	inscode(d, ds, de, "ESPIPE", ESPIPE, "Illegal seek");
#endif
#ifdef ENOLINK
	inscode(d, ds, de, "ENOLINK", ENOLINK, "Link has been severed");
#endif
#ifdef ENETRESET
	inscode(d, ds, de, "ENETRESET", ENETRESET, "Network dropped connection because of reset");
#else
#ifdef WSAENETRESET
	inscode(d, ds, de, "ENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#endif
#ifdef ETIMEDOUT
	inscode(d, ds, de, "ETIMEDOUT", ETIMEDOUT, "Connection timed out");
#else
#ifdef WSAETIMEDOUT
	inscode(d, ds, de, "ETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#endif
#ifdef ENOENT
	inscode(d, ds, de, "ENOENT", ENOENT, "No such file or directory");
#endif
#ifdef EEXIST
	inscode(d, ds, de, "EEXIST", EEXIST, "File exists");
#endif
#ifdef EDQUOT
	inscode(d, ds, de, "EDQUOT", EDQUOT, "Quota exceeded");
#else
#ifdef WSAEDQUOT
	inscode(d, ds, de, "EDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#endif
#ifdef ENOSTR
	inscode(d, ds, de, "ENOSTR", ENOSTR, "Device not a stream");
#endif
#ifdef EBADSLT
	inscode(d, ds, de, "EBADSLT", EBADSLT, "Invalid slot");
#endif
#ifdef EBADRQC
	inscode(d, ds, de, "EBADRQC", EBADRQC, "Invalid request code");
#endif
#ifdef ELIBACC
	inscode(d, ds, de, "ELIBACC", ELIBACC, "Can not access a needed shared library");
#endif
#ifdef EFAULT
	inscode(d, ds, de, "EFAULT", EFAULT, "Bad address");
#else
#ifdef WSAEFAULT
	inscode(d, ds, de, "EFAULT", WSAEFAULT, "Bad address");
#endif
#endif
#ifdef EFBIG
	inscode(d, ds, de, "EFBIG", EFBIG, "File too large");
#endif
#ifdef EDEADLK
	inscode(d, ds, de, "EDEADLK", EDEADLK, "Resource deadlock would occur");
#endif
#ifdef ENOTCONN
	inscode(d, ds, de, "ENOTCONN", ENOTCONN, "Transport endpoint is not connected");
#else
#ifdef WSAENOTCONN
	inscode(d, ds, de, "ENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#endif
#ifdef EDESTADDRREQ
	inscode(d, ds, de, "EDESTADDRREQ", EDESTADDRREQ, "Destination address required");
#else
#ifdef WSAEDESTADDRREQ
	inscode(d, ds, de, "EDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#endif
#ifdef ELIBSCN
	inscode(d, ds, de, "ELIBSCN", ELIBSCN, ".lib section in a.out corrupted");
#endif
#ifdef ENOLCK
	inscode(d, ds, de, "ENOLCK", ENOLCK, "No record locks available");
#endif
#ifdef EISNAM
	inscode(d, ds, de, "EISNAM", EISNAM, "Is a named type file");
#endif
#ifdef ECONNABORTED
	inscode(d, ds, de, "ECONNABORTED", ECONNABORTED, "Software caused connection abort");
#else
#ifdef WSAECONNABORTED
	inscode(d, ds, de, "ECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#endif
#ifdef ENETUNREACH
	inscode(d, ds, de, "ENETUNREACH", ENETUNREACH, "Network is unreachable");
#else
#ifdef WSAENETUNREACH
	inscode(d, ds, de, "ENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#endif
#ifdef ESTALE
	inscode(d, ds, de, "ESTALE", ESTALE, "Stale NFS file handle");
#else
#ifdef WSAESTALE
	inscode(d, ds, de, "ESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#endif
#ifdef ENOSR
	inscode(d, ds, de, "ENOSR", ENOSR, "Out of streams resources");
#endif
#ifdef ENOMEM
	inscode(d, ds, de, "ENOMEM", ENOMEM, "Out of memory");
#endif
#ifdef ENOTSOCK
	inscode(d, ds, de, "ENOTSOCK", ENOTSOCK, "Socket operation on non-socket");
#else
#ifdef WSAENOTSOCK
	inscode(d, ds, de, "ENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#endif
#ifdef ESTRPIPE
	inscode(d, ds, de, "ESTRPIPE", ESTRPIPE, "Streams pipe error");
#endif
#ifdef EMLINK
	inscode(d, ds, de, "EMLINK", EMLINK, "Too many links");
#endif
#ifdef ERANGE
	inscode(d, ds, de, "ERANGE", ERANGE, "Math result not representable");
#endif
#ifdef ELIBEXEC
	inscode(d, ds, de, "ELIBEXEC", ELIBEXEC, "Cannot exec a shared library directly");
#endif
#ifdef EL3HLT
	inscode(d, ds, de, "EL3HLT", EL3HLT, "Level 3 halted");
#endif
#ifdef ECONNRESET
	inscode(d, ds, de, "ECONNRESET", ECONNRESET, "Connection reset by peer");
#else
#ifdef WSAECONNRESET
	inscode(d, ds, de, "ECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#endif
#ifdef EADDRINUSE
	inscode(d, ds, de, "EADDRINUSE", EADDRINUSE, "Address already in use");
#else
#ifdef WSAEADDRINUSE
	inscode(d, ds, de, "EADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#endif
#ifdef EOPNOTSUPP
	inscode(d, ds, de, "EOPNOTSUPP", EOPNOTSUPP, "Operation not supported on transport endpoint");
#else
#ifdef WSAEOPNOTSUPP
	inscode(d, ds, de, "EOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#endif
#ifdef EREMCHG
	inscode(d, ds, de, "EREMCHG", EREMCHG, "Remote address changed");
#endif
#ifdef EAGAIN
	inscode(d, ds, de, "EAGAIN", EAGAIN, "Try again");
#endif
#ifdef ENAMETOOLONG
	inscode(d, ds, de, "ENAMETOOLONG", ENAMETOOLONG, "File name too long");
#else
#ifdef WSAENAMETOOLONG
	inscode(d, ds, de, "ENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#endif
#ifdef ENOTTY
	inscode(d, ds, de, "ENOTTY", ENOTTY, "Not a typewriter");
#endif
#ifdef ERESTART
	inscode(d, ds, de, "ERESTART", ERESTART, "Interrupted system call should be restarted");
#endif
#ifdef ESOCKTNOSUPPORT
	inscode(d, ds, de, "ESOCKTNOSUPPORT", ESOCKTNOSUPPORT, "Socket type not supported");
#else
#ifdef WSAESOCKTNOSUPPORT
	inscode(d, ds, de, "ESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#endif
#ifdef ETIME
	inscode(d, ds, de, "ETIME", ETIME, "Timer expired");
#endif
#ifdef EBFONT
	inscode(d, ds, de, "EBFONT", EBFONT, "Bad font file format");
#endif
#ifdef EDEADLOCK
	inscode(d, ds, de, "EDEADLOCK", EDEADLOCK, "Error EDEADLOCK");
#endif
#ifdef ETOOMANYREFS
	inscode(d, ds, de, "ETOOMANYREFS", ETOOMANYREFS, "Too many references: cannot splice");
#else
#ifdef WSAETOOMANYREFS
	inscode(d, ds, de, "ETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#endif
#ifdef EMFILE
	inscode(d, ds, de, "EMFILE", EMFILE, "Too many open files");
#else
#ifdef WSAEMFILE
	inscode(d, ds, de, "EMFILE", WSAEMFILE, "Too many open files");
#endif
#endif
#ifdef ETXTBSY
	inscode(d, ds, de, "ETXTBSY", ETXTBSY, "Text file busy");
#endif
#ifdef EINPROGRESS
	inscode(d, ds, de, "EINPROGRESS", EINPROGRESS, "Operation now in progress");
#else
#ifdef WSAEINPROGRESS
	inscode(d, ds, de, "EINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#endif
#ifdef ENXIO
	inscode(d, ds, de, "ENXIO", ENXIO, "No such device or address");
#endif
#ifdef ENOPKG
	inscode(d, ds, de, "ENOPKG", ENOPKG, "Package not installed");
#endif
#ifdef WSASY
	inscode(d, ds, de, "WSASY", WSASY, "Error WSASY");
#endif
#ifdef WSAEHOSTDOWN
	inscode(d, ds, de, "WSAEHOSTDOWN", WSAEHOSTDOWN, "Host is down");
#endif
#ifdef WSAENETDOWN
	inscode(d, ds, de, "WSAENETDOWN", WSAENETDOWN, "Network is down");
#endif
#ifdef WSAENOTSOCK
	inscode(d, ds, de, "WSAENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#ifdef WSAEHOSTUNREACH
	inscode(d, ds, de, "WSAEHOSTUNREACH", WSAEHOSTUNREACH, "No route to host");
#endif
#ifdef WSAELOOP
	inscode(d, ds, de, "WSAELOOP", WSAELOOP, "Too many symbolic links encountered");
#endif
#ifdef WSAEMFILE
	inscode(d, ds, de, "WSAEMFILE", WSAEMFILE, "Too many open files");
#endif
#ifdef WSAESTALE
	inscode(d, ds, de, "WSAESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#ifdef WSAVERNOTSUPPORTED
	inscode(d, ds, de, "WSAVERNOTSUPPORTED", WSAVERNOTSUPPORTED, "Error WSAVERNOTSUPPORTED");
#endif
#ifdef WSAENETUNREACH
	inscode(d, ds, de, "WSAENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#ifdef WSAEPROCLIM
	inscode(d, ds, de, "WSAEPROCLIM", WSAEPROCLIM, "Error WSAEPROCLIM");
#endif
#ifdef WSAEFAULT
	inscode(d, ds, de, "WSAEFAULT", WSAEFAULT, "Bad address");
#endif
#ifdef WSANOTINITIALISED
	inscode(d, ds, de, "WSANOTINITIALISED", WSANOTINITIALISED, "Error WSANOTINITIALISED");
#endif
#ifdef WSAEUSERS
	inscode(d, ds, de, "WSAEUSERS", WSAEUSERS, "Too many users");
#endif
#ifdef WSAMAKEASYNCREPL
	inscode(d, ds, de, "WSAMAKEASYNCREPL", WSAMAKEASYNCREPL, "Error WSAMAKEASYNCREPL");
#endif
#ifdef WSAENOPROTOOPT
	inscode(d, ds, de, "WSAENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available");
#endif
#ifdef WSAECONNABORTED
	inscode(d, ds, de, "WSAECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#ifdef WSAENAMETOOLONG
	inscode(d, ds, de, "WSAENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#ifdef WSAENOTEMPTY
	inscode(d, ds, de, "WSAENOTEMPTY", WSAENOTEMPTY, "Directory not empty");
#endif
#ifdef WSAESHUTDOWN
	inscode(d, ds, de, "WSAESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown");
#endif
#ifdef WSAEAFNOSUPPORT
	inscode(d, ds, de, "WSAEAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol");
#endif
#ifdef WSAETOOMANYREFS
	inscode(d, ds, de, "WSAETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#ifdef WSAEACCES
	inscode(d, ds, de, "WSAEACCES", WSAEACCES, "Permission denied");
#endif
#ifdef WSATR
	inscode(d, ds, de, "WSATR", WSATR, "Error WSATR");
#endif
#ifdef WSABASEERR
	inscode(d, ds, de, "WSABASEERR", WSABASEERR, "Error WSABASEERR");
#endif
#ifdef WSADESCRIPTIO
	inscode(d, ds, de, "WSADESCRIPTIO", WSADESCRIPTIO, "Error WSADESCRIPTIO");
#endif
#ifdef WSAEMSGSIZE
	inscode(d, ds, de, "WSAEMSGSIZE", WSAEMSGSIZE, "Message too long");
#endif
#ifdef WSAEBADF
	inscode(d, ds, de, "WSAEBADF", WSAEBADF, "Bad file number");
#endif
#ifdef WSAECONNRESET
	inscode(d, ds, de, "WSAECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#ifdef WSAGETSELECTERRO
	inscode(d, ds, de, "WSAGETSELECTERRO", WSAGETSELECTERRO, "Error WSAGETSELECTERRO");
#endif
#ifdef WSAETIMEDOUT
	inscode(d, ds, de, "WSAETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#ifdef WSAENOBUFS
	inscode(d, ds, de, "WSAENOBUFS", WSAENOBUFS, "No buffer space available");
#endif
#ifdef WSAEDISCON
	inscode(d, ds, de, "WSAEDISCON", WSAEDISCON, "Error WSAEDISCON");
#endif
#ifdef WSAEINTR
	inscode(d, ds, de, "WSAEINTR", WSAEINTR, "Interrupted system call");
#endif
#ifdef WSAEPROTOTYPE
	inscode(d, ds, de, "WSAEPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket");
#endif
#ifdef WSAHOS
	inscode(d, ds, de, "WSAHOS", WSAHOS, "Error WSAHOS");
#endif
#ifdef WSAEADDRINUSE
	inscode(d, ds, de, "WSAEADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#ifdef WSAEADDRNOTAVAIL
	inscode(d, ds, de, "WSAEADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address");
#endif
#ifdef WSAEALREADY
	inscode(d, ds, de, "WSAEALREADY", WSAEALREADY, "Operation already in progress");
#endif
#ifdef WSAEPROTONOSUPPORT
	inscode(d, ds, de, "WSAEPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported");
#endif
#ifdef WSASYSNOTREADY
	inscode(d, ds, de, "WSASYSNOTREADY", WSASYSNOTREADY, "Error WSASYSNOTREADY");
#endif
#ifdef WSAEWOULDBLOCK
	inscode(d, ds, de, "WSAEWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block");
#endif
#ifdef WSAEPFNOSUPPORT
	inscode(d, ds, de, "WSAEPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported");
#endif
#ifdef WSAEOPNOTSUPP
	inscode(d, ds, de, "WSAEOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#ifdef WSAEISCONN
	inscode(d, ds, de, "WSAEISCONN", WSAEISCONN, "Transport endpoint is already connected");
#endif
#ifdef WSAEDQUOT
	inscode(d, ds, de, "WSAEDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#ifdef WSAENOTCONN
	inscode(d, ds, de, "WSAENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#ifdef WSAEREMOTE
	inscode(d, ds, de, "WSAEREMOTE", WSAEREMOTE, "Object is remote");
#endif
#ifdef WSAEINVAL
	inscode(d, ds, de, "WSAEINVAL", WSAEINVAL, "Invalid argument");
#endif
#ifdef WSAEINPROGRESS
	inscode(d, ds, de, "WSAEINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#ifdef WSAGETSELECTEVEN
	inscode(d, ds, de, "WSAGETSELECTEVEN", WSAGETSELECTEVEN, "Error WSAGETSELECTEVEN");
#endif
#ifdef WSAESOCKTNOSUPPORT
	inscode(d, ds, de, "WSAESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#ifdef WSAGETASYNCERRO
	inscode(d, ds, de, "WSAGETASYNCERRO", WSAGETASYNCERRO, "Error WSAGETASYNCERRO");
#endif
#ifdef WSAMAKESELECTREPL
	inscode(d, ds, de, "WSAMAKESELECTREPL", WSAMAKESELECTREPL, "Error WSAMAKESELECTREPL");
#endif
#ifdef WSAGETASYNCBUFLE
	inscode(d, ds, de, "WSAGETASYNCBUFLE", WSAGETASYNCBUFLE, "Error WSAGETASYNCBUFLE");
#endif
#ifdef WSAEDESTADDRREQ
	inscode(d, ds, de, "WSAEDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#ifdef WSAECONNREFUSED
	inscode(d, ds, de, "WSAECONNREFUSED", WSAECONNREFUSED, "Connection refused");
#endif
#ifdef WSAENETRESET
	inscode(d, ds, de, "WSAENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#ifdef WSAN
	inscode(d, ds, de, "WSAN", WSAN, "Error WSAN");
#endif

	Py_DECREF(de);
}