cstubs

python s60 1.4.5版本的源代码

/*
Input used to generate the Python module "glmodule.c".
The stub generator is a Python script called "cgen.py".

Each definition must be contained on one line:

<returntype> <name> <type> <arg> <type> <arg>

<returntype> can be: void, short, long (XXX maybe others?)

<type> can be: char, string, short, float, long, or double
	string indicates a null terminated string;
	if <type> is char and <arg> begins with a *, the * is stripped
	and <type> is changed into string

<arg> has the form <mode> or <mode>[<subscript>]
	where <mode> can be
		s: arg is sent
		r: arg is received		(arg is a pointer)
	and <subscript> can be (N and I are numbers):
		N
		argI
		retval
		N*argI
		N*I
		N*retval
	In the case where the subscript consists of two parts
	separated by *, the first part is the width of the matrix, and
	the second part is the length of the matrix.  This order is
	opposite from the order used in C to declare a two-dimensional
	matrix.
*/

/*
 * An attempt has been made to make this module switch threads on qread
 * calls. It is far from safe, though.
 */

#include <gl.h>
#include <device.h>

#ifdef __sgi
extern int devport();
extern int textwritemask();
extern int pagewritemask();
extern int gewrite();
extern int gettp();
#endif

#include "Python.h"
#include "cgensupport.h"

/*
Some stubs are too complicated for the stub generator.
We can include manually written versions of them here.
A line starting with '%' gives the name of the function so the stub
generator can include it in the table of functions.
*/

% qread

static PyObject *
gl_qread(self, args)
	PyObject *self;
	PyObject *args;
{
	long retval;
	short arg1 ;
	Py_BEGIN_ALLOW_THREADS
	retval = qread( & arg1 );
	Py_END_ALLOW_THREADS
	{ PyObject *v = PyTuple_New( 2 );
	  if (v == NULL) return NULL;
	  PyTuple_SetItem(v, 0, mknewlongobject(retval));
	  PyTuple_SetItem(v, 1, mknewshortobject(arg1));
	  return v;
	}
}


/*
varray -- an array of v.. calls.
The argument is an array (maybe list or tuple) of points.
Each point must be a tuple or list of coordinates (x, y, z).
The points may be 2- or 3-dimensional but must all have the
same dimension.  Float and int values may be mixed however.
The points are always converted to 3D double precision points
by assuming z=0.0 if necessary (as indicated in the man page),
and for each point v3d() is called.
*/

% varray

static PyObject *
gl_varray(self, args)
	PyObject *self;
	PyObject *args;
{
	PyObject *v, *w=NULL;
	int i, n, width;
	double vec[3];
	PyObject * (*getitem)(PyObject *, int);
	
	if (!PyArg_GetObject(args, 1, 0, &v))
		return NULL;
	
	if (PyList_Check(v)) {
		n = PyList_Size(v);
		getitem = PyList_GetItem;
	}
	else if (PyTuple_Check(v)) {
		n = PyTuple_Size(v);
		getitem = PyTuple_GetItem;
	}
	else {
		PyErr_BadArgument();
		return NULL;
	}
	
	if (n == 0) {
		Py_INCREF(Py_None);
		return Py_None;
	}
	if (n > 0)
		w = (*getitem)(v, 0);
	
	width = 0;
	if (w == NULL) {
	}
	else if (PyList_Check(w)) {
		width = PyList_Size(w);
	}
	else if (PyTuple_Check(w)) {
		width = PyTuple_Size(w);
	}
	
	switch (width) {
	case 2:
		vec[2] = 0.0;
		/* Fall through */
	case 3:
		break;
	default:
		PyErr_BadArgument();
		return NULL;
	}
	
	for (i = 0; i < n; i++) {
		w = (*getitem)(v, i);
		if (!PyArg_GetDoubleArray(w, 1, 0, width, vec))
			return NULL;
		v3d(vec);
	}
	
	Py_INCREF(Py_None);
	return Py_None;
}

/*
vnarray, nvarray -- an array of n3f and v3f calls.
The argument is an array (list or tuple) of pairs of points and normals.
Each pair is a tuple (NOT a list) of a point and a normal for that point.
Each point or normal must be a tuple (NOT a list) of coordinates (x, y, z).
Three coordinates must be given.  Float and int values may be mixed.
For each pair, n3f() is called for the normal, and then v3f() is called
for the vector.

vnarray and nvarray differ only in the order of the vector and normal in
the pair: vnarray expects (v, n) while nvarray expects (n, v).
*/

static PyObject *gen_nvarray(); /* Forward */

% nvarray

static PyObject *
gl_nvarray(self, args)
	PyObject *self;
	PyObject *args;
{
	return gen_nvarray(args, 0);
}

% vnarray

static PyObject *
gl_vnarray(self, args)
	PyObject *self;
	PyObject *args;
{
	return gen_nvarray(args, 1);
}

/* Generic, internal version of {nv,nv}array: inorm indicates the
   argument order, 0: normal first, 1: vector first. */

static PyObject *
gen_nvarray(args, inorm)
	PyObject *args;
	int inorm;
{
	PyObject *v, *w, *wnorm, *wvec;
	int i, n;
	float norm[3], vec[3];
	PyObject * (*getitem)(PyObject *, int);
	
	if (!PyArg_GetObject(args, 1, 0, &v))
		return NULL;
	
	if (PyList_Check(v)) {
		n = PyList_Size(v);
		getitem = PyList_GetItem;
	}
	else if (PyTuple_Check(v)) {
		n = PyTuple_Size(v);
		getitem = PyTuple_GetItem;
	}
	else {
		PyErr_BadArgument();
		return NULL;
	}
	
	for (i = 0; i < n; i++) {
		w = (*getitem)(v, i);
		if (!PyTuple_Check(w) || PyTuple_Size(w) != 2) {
			PyErr_BadArgument();
			return NULL;
		}
		wnorm = PyTuple_GetItem(w, inorm);
		wvec = PyTuple_GetItem(w, 1 - inorm);
		if (!PyArg_GetFloatArray(wnorm, 1, 0, 3, norm) ||
			!PyArg_GetFloatArray(wvec, 1, 0, 3, vec))
			return NULL;
		n3f(norm);
		v3f(vec);
	}
	
	Py_INCREF(Py_None);
	return Py_None;
}

/* nurbssurface(s_knots[], t_knots[], ctl[][], s_order, t_order, type).
   The dimensions of ctl[] are computed as follows:
   [len(s_knots) - s_order], [len(t_knots) - t_order]
*/

% nurbssurface

static PyObject *
gl_nurbssurface(self, args)
	PyObject *self;
	PyObject *args;
{
	long arg1 ;
	double * arg2 ;
	long arg3 ;
	double * arg4 ;
	double *arg5 ;
	long arg6 ;
	long arg7 ;
	long arg8 ;
	long ncoords;
	long s_byte_stride, t_byte_stride;
	long s_nctl, t_nctl;
	long s, t;
	PyObject *v, *w, *pt;
	double *pnext;
	if (!PyArg_GetLongArraySize(args, 6, 0, &arg1))
		return NULL;
	if ((arg2 = PyMem_NEW(double, arg1 )) == NULL) {
		return PyErr_NoMemory();
	}
	if (!PyArg_GetDoubleArray(args, 6, 0, arg1 , arg2))
		return NULL;
	if (!PyArg_GetLongArraySize(args, 6, 1, &arg3))
		return NULL;
	if ((arg4 = PyMem_NEW(double, arg3 )) == NULL) {
		return PyErr_NoMemory();
	}
	if (!PyArg_GetDoubleArray(args, 6, 1, arg3 , arg4))
		return NULL;
	if (!PyArg_GetLong(args, 6, 3, &arg6))
		return NULL;
	if (!PyArg_GetLong(args, 6, 4, &arg7))
		return NULL;
	if (!PyArg_GetLong(args, 6, 5, &arg8))
		return NULL;
	if (arg8 == N_XYZ)
		ncoords = 3;
	else if (arg8 == N_XYZW)
		ncoords = 4;
	else {
		PyErr_BadArgument();
		return NULL;
	}
	s_nctl = arg1 - arg6;
	t_nctl = arg3 - arg7;
	if (!PyArg_GetObject(args, 6, 2, &v))
		return NULL;
	if (!PyList_Check(v) || PyList_Size(v) != s_nctl) {
		PyErr_BadArgument();
		return NULL;
	}
	if ((arg5 = PyMem_NEW(double, s_nctl*t_nctl*ncoords )) == NULL) {
		return PyErr_NoMemory();
	}
	pnext = arg5;
	for (s = 0; s < s_nctl; s++) {
		w = PyList_GetItem(v, s);
		if (w == NULL || !PyList_Check(w) ||
					PyList_Size(w) != t_nctl) {
			PyErr_BadArgument();
			return NULL;
		}
		for (t = 0; t < t_nctl; t++) {
			pt = PyList_GetItem(w, t);
			if (!PyArg_GetDoubleArray(pt, 1, 0, ncoords, pnext))
				return NULL;
			pnext += ncoords;
		}
	}
	s_byte_stride = sizeof(double) * ncoords;
	t_byte_stride = s_byte_stride * s_nctl;
	nurbssurface( arg1 , arg2 , arg3 , arg4 ,
		s_byte_stride , t_byte_stride , arg5 , arg6 , arg7 , arg8 );
	PyMem_DEL(arg2);
	PyMem_DEL(arg4);
	PyMem_DEL(arg5);
	Py_INCREF(Py_None);
	return Py_None;
}

/* nurbscurve(knots, ctlpoints, order, type).
   The length of ctlpoints is len(knots)-order. */

%nurbscurve

static PyObject *
gl_nurbscurve(self, args)
	PyObject *self;
	PyObject *args;
{
	long arg1 ;
	double * arg2 ;
	long arg3 ;
	double * arg4 ;
	long arg5 ;
	long arg6 ;
	int ncoords, npoints;
	int i;
	PyObject *v;
	double *pnext;
	if (!PyArg_GetLongArraySize(args, 4, 0, &arg1))
		return NULL;
	if ((arg2 = PyMem_NEW(double, arg1 )) == NULL) {
		return PyErr_NoMemory();
	}
	if (!PyArg_GetDoubleArray(args, 4, 0, arg1 , arg2))
		return NULL;
	if (!PyArg_GetLong(args, 4, 2, &arg5))
		return NULL;
	if (!PyArg_GetLong(args, 4, 3, &arg6))
		return NULL;
	if (arg6 == N_ST)
		ncoords = 2;
	else if (arg6 == N_STW)
		ncoords = 3;
	else {
		PyErr_BadArgument();
		return NULL;
	}
	npoints = arg1 - arg5;
	if (!PyArg_GetObject(args, 4, 1, &v))
		return NULL;
	if (!PyList_Check(v) || PyList_Size(v) != npoints) {
		PyErr_BadArgument();
		return NULL;
	}
	if ((arg4 = PyMem_NEW(double, npoints*ncoords )) == NULL) {
		return PyErr_NoMemory();
	}
	pnext = arg4;
	for (i = 0; i < npoints; i++) {
		if (!PyArg_GetDoubleArray(PyList_GetItem(v, i), 1, 0, ncoords, pnext))
			return NULL;
		pnext += ncoords;
	}
	arg3 = (sizeof(double)) * ncoords;
	nurbscurve( arg1 , arg2 , arg3 , arg4 , arg5 , arg6 );
	PyMem_DEL(arg2);
	PyMem_DEL(arg4);
	Py_INCREF(Py_None);
	return Py_None;
}

/* pwlcurve(points, type).
   Points is a list of points. Type must be N_ST. */

%pwlcurve

static PyObject *
gl_pwlcurve(self, args)
	PyObject *self;
	PyObject *args;
{
	PyObject *v;
	long type;
	double *data, *pnext;
	long npoints, ncoords;
	int i;
	if (!PyArg_GetObject(args, 2, 0, &v))
		return NULL;
	if (!PyArg_GetLong(args, 2, 1, &type))
		return NULL;
	if (!PyList_Check(v)) {
		PyErr_BadArgument();
		return NULL;
	}
	npoints = PyList_Size(v);
	if (type == N_ST)
		ncoords = 2;
	else {
		PyErr_BadArgument();
		return NULL;
	}
	if ((data = PyMem_NEW(double, npoints*ncoords)) == NULL) {
		return PyErr_NoMemory();
	}
	pnext = data;
	for (i = 0; i < npoints; i++) {
		if (!PyArg_GetDoubleArray(PyList_GetItem(v, i), 1, 0, ncoords, pnext))
			return NULL;
		pnext += ncoords;
	}
	pwlcurve(npoints, data, sizeof(double)*ncoords, type);
	PyMem_DEL(data);
	Py_INCREF(Py_None);
	return Py_None;
}


/* Picking and Selecting */

static short *pickbuffer = NULL;
static long pickbuffersize;

static PyObject *
pick_select(args, func)
	PyObject *args;
	void (*func)();
{
	if (!PyArg_GetLong(args, 1, 0, &pickbuffersize))
		return NULL;
	if (pickbuffer != NULL) {