uart.c

一种基于ARM7的嵌入式Webserver

#undef MOD_GLOBALS
#define	MOD_COM

#include "stdarg.h"
#include "snds.h"
#include "isr.h"
#include "uart.h"

#define rUARTLCON0     rULCONWL_0 | rSTOPBIT_0 |  rULCON_PMD_0 | rCLKBIT_0
#define rUARTLCON1     rULCONWL_1 | rSTOPBIT_1 |  rULCON_PMD_1 | rCLKBIT_1

#define rUARTCONT0     UCON_RXM_INTREQ | UCON_TXM_INTREQ | UCON_RXSTAT_INT
#define rUARTCONT1     UCON_RXM_INTREQ | UCON_TXM_INTREQ | UCON_RXSTAT_INT


/****************************************************************************
README
This file realized serial communication, include serial 0 and serial 1
Serial mode can be interrupt or query.

if use ucos, task suspend and resume is use at interrupt mode



*****************************************************************************/



#define BAUD_TABLE     7          /* No of baud rate table */

char putchar(char c);
char i_getkey (U32 channel);

const BaudTable U_BaudRate[BAUD_TABLE] = {
/* for 50MHz/2 UART clock */
           9600,  0x00a20,
          19200,  0x00500,
          38400,  0x00280,
          57600,  0x001a0,
          115200, 0x000d0,
          230400, 0x00060,
          460800, 0x00020   // not available 
};
uint32  UART_Initialize()
{ 
  Disable_Int(nGLOBAL_INT);
  UARTLCON0=0x03;  //8位数据，1停止位，无校验，内部时钟
  UARTLCON1=0x03;
  UARTCONT0=0x0d;  //Rx，Tx中断模式，无中断，无DSR
  UARTCONT1=0x0d;
  UARTBRD0  = 0x00500; //波特率19200
  UARTBRD1  = 0x00500; //波特率19200
  Enable_Int(nGLOBAL_INT);  /* Global interrupt disabled */
}

uint32   gethex2dec(uint32 n)
{}
uint32   get_num(void)
      {
        return(get_digit());
      
      } 


uint32   get_digit(void)
{char ch; 
   ch=i_getkey (1);
   if is_digit(ch)
     return(ch-'0');
};

uint32   kbd_hit(void){} ;
/*
query mode putkey and get key
*/
void _q_putkey(uint32 channel,char ch) 
{
    if(channel) {
        WaitXmitter(UARTSTAT1);
        UARTTXH1 = ch;
    }
    else {
        WaitXmitter(UARTSTAT0);
        UARTTXH0 = ch;
    }
}


char _q_getkey(uint32 channel) 
{ 
  char ch;
 
    if(channel) { WaitRcver(UARTSTAT1);
                  ch = UARTRXB1;
    }
    else { WaitRcver(UARTSTAT0);
           ch = UARTRXB0;
    }
    return ch;
}

char i_getkey (U32 channel) //未调试
{ //int i,j;
  if(channel==1)
       {//WaitRcver(UARTSTAT1); //等待输入
         return(UARTRXB1);
        }
      else
        {  
         WaitRcver(UARTSTAT0); //等待输入
         return(UARTRXB0);
        }  

 }

char get_char(U32 channel)
 {char ch; 
   ch=i_getkey ( channel);
   if is_digit(ch)
     return(ch);
  }; 
/****************************************************************************
CONSOLE FUNCTION
console is define by CONSOLE_TTY

char putchar (char c)		put a char to console, if c is \n (0xa, line feed), 
							add a 0xd (carriage return) to console;
							
void getline (char *line, unsigned char n)
							get a line to cosole, include echo input char at console,
							realize backspace and del;
							
******************************************************************************/

#define CNTLQ      0x11
#define CNTLS      0x13
#define DEL        0x7F
#define BACKSPACE  0x08
#define CR         0x0D
#define LF         0x0A







/***************/
/* Line Editor */
/***************/
void getline (char *line, int n)
{
	int cnt = 0;
	char c;

 	do  {

		c = i_getkey (1); //从串口1输入

		if (c == CR)  c = LF;    /* read character                 */
		if (c == BACKSPACE  ||  c == DEL)  {    /* process backspace              */
      		if (cnt != 0)  {            
        		cnt--;                              /* decrement count                */
        		line--;                             /* and line pointer               */
        		putchar (0x08);                     /* echo backspace                 */
        		putchar (' ');
        		putchar (0x08);
      		}
    	}
    	else if (c != CNTLQ && c != CNTLS)  {   /* ignore Control S/Q             */
      		putchar (*line = c);                  /* echo and store character       */
      		line++;                               /* increment line pointer         */
      		cnt++;                                /* and count                      */
    	}
  	}  while (cnt < n - 1  &&  c != LF);      /* check limit and line feed      */
  	*line = 0;                                /* mark end of string             */
}
char putchar (char c)
  { int i,j;
    UARTTXH0=c; //同时从两个串口输出
    UARTTXH1=c;
    do{i=UARTSTAT0 & 0x80; //等待输出完成
       j=UARTSTAT1 & 0x80; 
      }
    while(j==0);
    if(c=='\n')
      putchar('\r'); 
  }
  
/* formatted output string */
void i_printf(char *fmt, ...)
{
    va_list argptr;
    char temp_buf[256], *p;
    p = temp_buf;

    va_start(argptr, fmt);
    vsprintf(temp_buf, fmt, argptr);
	while (*p != '\0')   putchar(*(p++));
    va_end(argptr);
}

void bzero(unsigned char * buffer, int nbytes)
{
	U8 *bufend = buffer + nbytes;
	while (buffer < bufend) {
		*buffer++ = 0;
	}
}