ledcomm.h.svn-base

由MSP430F135做控制器的温度控制详细程序

/************************************************************************************
*				     显  示  程  序		  					        *
*				时间：2007.6.12		  版本：1.0				*
*************************************************************************************/

///////////////////////////////////////////////////////////////////////
//LeD COMMAND DEFINE
////////////////////////////////////////////////////////////////////
/*#define LED_OUT_H   P4OUT//十位Port4
#define Hdis_( 0 )		0xc0		//write to led 0
#define Hdis_( 1 )		0xf9		//write to led 1
#define Hdis_( 2 )		0xa4		//write to led 2
#define Hdis_( 3 )	        0xb0		//write to led 3
#define Hdis_( 4 )		0x89		//write to led 4
#define Hdis_( 5 )		0x92		//write to led 5
#define Hdis_( 6 )		0x82		//write to led 6
#define Hdis_( 7 )		0xf8		//write to led 7
#define Hdis_( 8 )		0x80		//write to led 8
#define Hdis_( 9 )		0x90		//write to led 9


#define LED_OUT_L   P5OUT//个位Port5
#define Ldis_( 0 ) 		0xc0		//write to led 0
#define Ldis_( 1 )	        0xf9		//write to led 1
#define Ldis_( 2 )		0xa4		//write to led 2
#define Ldis_( 3 )		0xb0		//write to led 3
#define Ldis_( 4 )		0x89		//write to led 4
#define Ldis_( 5 )		0x92		//write to led 5
#define Ldis_( 6 )		0x82		//write to led 6
#define Ldis_( 7 )		0xf8		//write to led 7
#define Ldis_( 8 )		0x80		//write to led 8
#define Ldis_( 9 )		0x90		//write to led 9



//#define Ldis_9		0x90		//write to led 9

/*
#define CMD_TXHOME		0x40		//set text home address
#define CMD_GRHOME		0x42		//set graphic home address
#define CMD_TXAREA		0x41		//set text area
#define CMD_GRAREA		0x43		//set graphic area
#define CMD_CURPRT		0x21		//set cursor pointer
#define CMD_OFFSET		0x22		//set offset address
#define CMD_ADPSET		0x24		//set address pointer

#define CMD_DISNOM		0x9c		//Text on, graphic on,cursor off
#define CMD_DISBLN		0x9d		//Text on, graphic on,cursor blink

#define CMD_CHRMD		0x80		//or mode, internal character generater mode


#define MAXCOL			30		//LCD maximam columns
#define ECOFFSET		0x0f		//Extenal character located at 0x7fc0 to 0x7ff


#define TXSCR			480		//one text screen ? byte
#define GRSCR			3840		//one graphic screen ? byte

#define ADDTXSCR0		0		     	      	//define text screen 1 address at 0x0000h in the ram
#define ADDTXSCR1		TXSCR*1+ADDTXSCR0		//define text screen 2 address at 0x1e0h in the ram
#define ADDTXSCR2		TXSCR*2+ADDTXSCR0		//define text screen 3 address at 0x3c0h in the ram
#define ADDTXSCR3		TXSCR*3+ADDTXSCR0		//define text screen 4 address at 0x5a0h in the ram
#define ADDTXSCR4		TXSCR*4+ADDTXSCR0		//define text screen 5 address at 0x780h in the ram
#define ADDTXSCR5		TXSCR*5+ADDTXSCR0		//define text screen 6 address at 0x960h in the ram
#define ADDTXSCR6		TXSCR*6+ADDTXSCR0		//define text screen 7 address at 0xb40h in the ram

#define ADDGRSCR0		4096					//define graphic screen 1 address at 0x1000h in the ram
#define ADDGRSCR1		GRSCR*1+ADDGRSCR0		//define graphic screen 2 address at 0x1f00h in the ram
#define ADDGRSCR2		GRSCR*2+ADDGRSCR0		//define graphic screen 3 address at 0x2e00h in the ram
#define ADDGRSCR3		GRSCR*3+ADDGRSCR0		//define graphic screen 4 address at 0x3d00h in the ram
#define ADDGRSCR4		GRSCR*4+ADDGRSCR0		//define graphic screen 5 address at 0x4c00h in the ram
#define ADDGRSCR5		GRSCR*5+ADDGRSCR0		//define graphic screen 6 address at 0x5b00h in the ram
#define ADDGRSCR6		GRSCR*6+ADDGRSCR0		//define graphic screen 7 address at 0x6a00h in the ram
*/