📄 light_struct.lst
字号:
24 =2 // 1.开头加入#include <reg51.h>语句，一定要有。
25 =2 // 2.初始化串口 InitSerial();//本例中为20MHz晶体，300波特率，模式2初始化
26 =2 // 3.初始化串口缓冲区 InitSerialBuffer();
27 =2 // 4.使用显示字节，字，长字，字符，字符串，清屏函数。
28 =2 //**********************************************************************************
29 =2 //波特率计算公式：
30 =2 // TH1=256-(2^SMOD/32*Fosc/12*1/Bound)
31 =2 // 其中：SMOD=0，1；Fosc=晶体或晶振频率；Bound=波特率
32 =2 // 本例中，SMOD=0；Fosc=20*10E6；Bound=300，所以TH1=0x52。
33 =2 //**********************************************************************************
34 =2 //书写风格：
35 =2 // 1.带yy前缀标志的函数为杨屹改写的等效C库函数。
36 =2 // 2.单个单词用小写，yy定义为前缀，不算一个单词。
37 =2 // 3.多个单词（2个及以上），每个单词首字母大写。(有时变量名第一个单词首字母小写)
38 =2 // 4.采用内缩风格，每次缩进8个空格。
39 =2 //**********************************************************************************
40 =2
41 =2 void InitSerial() reentrant;//串口初始化
42 =2 void InitSerialBuffer(void) reentrant;//串口缓冲区初始化
43 =2 bit yygetch(unsigned char *ch) reentrant;//从串口缓冲区读1字节数据
44 =2 void PrintChar(unsigned char ch) reentrant;//显示字符
45 =2 void PrintCh(unsigned char ch) reentrant;//内部使用，不建议用户使用。
46 =2 void PrintByte(unsigned char Byte) reentrant;//以十六进制格式显示1个字节数据
47 =2 void PrintWord(unsigned int Word) reentrant;//以十六进制格式显示1个字数据
48 =2 void PrintLong(unsigned long LongWord) reentrant;//以十六进制格式显示1个长字数据
49 =2 void PrintStr(unsigned char *str) reentrant;//显示字符串
50 =2 void clrscr() reentrant;//清屏
51 =2
52 =2 void serial(void) reentrant;//串口中断服务子程序
53 =2
C51 COMPILER V7.50 LIGHT_STRUCT 03/31/2006 10:11:25 PAGE 13
54 =2 //收发缓冲区长度
55 =2 #define LenTxBuf 2000 //Don't too small,because it will cause display abnormal.
56 =2 #define LenRxBuf 50
57 =2
58 =2 #define MaxLenStr 100 /*buf[MaxLenStr+1] for '\0'*/
59 =2
60 =2 #define TABNum 4 //TAB键移动长度
61 =2
25 =1 #include <reg51.h>
1 =2 /*--------------------------------------------------------------------------
2 =2 REG51.H
3 =2
4 =2 Header file for generic 80C51 and 80C31 microcontroller.
5 =2 Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
6 =2 All rights reserved.
7 =2 --------------------------------------------------------------------------*/
8 =2
9 =2 #ifndef __REG51_H__
10 =2 #define __REG51_H__
11 =2
12 =2 /* BYTE Register */
13 =2 sfr P0 = 0x80;
14 =2 sfr P1 = 0x90;
15 =2 sfr P2 = 0xA0;
16 =2 sfr P3 = 0xB0;
17 =2 sfr PSW = 0xD0;
18 =2 sfr ACC = 0xE0;
19 =2 sfr B = 0xF0;
20 =2 sfr SP = 0x81;
21 =2 sfr DPL = 0x82;
22 =2 sfr DPH = 0x83;
23 =2 sfr PCON = 0x87;
24 =2 sfr TCON = 0x88;
25 =2 sfr TMOD = 0x89;
26 =2 sfr TL0 = 0x8A;
27 =2 sfr TL1 = 0x8B;
28 =2 sfr TH0 = 0x8C;
29 =2 sfr TH1 = 0x8D;
30 =2 sfr IE = 0xA8;
31 =2 sfr IP = 0xB8;
32 =2 sfr SCON = 0x98;
33 =2 sfr SBUF = 0x99;
34 =2
35 =2
36 =2 /* BIT Register */
37 =2 /* PSW */
38 =2 sbit CY = 0xD7;
39 =2 sbit AC = 0xD6;
40 =2 sbit F0 = 0xD5;
41 =2 sbit RS1 = 0xD4;
42 =2 sbit RS0 = 0xD3;
43 =2 sbit OV = 0xD2;
44 =2 sbit P = 0xD0;
45 =2
46 =2 /* TCON */
47 =2 sbit TF1 = 0x8F;
48 =2 sbit TR1 = 0x8E;
49 =2 sbit TF0 = 0x8D;
50 =2 sbit TR0 = 0x8C;
51 =2 sbit IE1 = 0x8B;
52 =2 sbit IT1 = 0x8A;
53 =2 sbit IE0 = 0x89;
C51 COMPILER V7.50 LIGHT_STRUCT 03/31/2006 10:11:25 PAGE 14
54 =2 sbit IT0 = 0x88;
55 =2
56 =2 /* IE */
57 =2 sbit EA = 0xAF;
58 =2 sbit ES = 0xAC;
59 =2 sbit ET1 = 0xAB;
60 =2 sbit EX1 = 0xAA;
61 =2 sbit ET0 = 0xA9;
62 =2 sbit EX0 = 0xA8;
63 =2
64 =2 /* IP */
65 =2 sbit PS = 0xBC;
66 =2 sbit PT1 = 0xBB;
67 =2 sbit PX1 = 0xBA;
68 =2 sbit PT0 = 0xB9;
69 =2 sbit PX0 = 0xB8;
70 =2
71 =2 /* P3 */
72 =2 sbit RD = 0xB7;
73 =2 sbit WR = 0xB6;
74 =2 sbit T1 = 0xB5;
75 =2 sbit T0 = 0xB4;
76 =2 sbit INT1 = 0xB3;
77 =2 sbit INT0 = 0xB2;
78 =2 sbit TXD = 0xB1;
79 =2 sbit RXD = 0xB0;
80 =2
81 =2 /* SCON */
82 =2 sbit SM0 = 0x9F;
83 =2 sbit SM1 = 0x9E;
84 =2 sbit SM2 = 0x9D;
85 =2 sbit REN = 0x9C;
86 =2 sbit TB8 = 0x9B;
87 =2 sbit RB8 = 0x9A;
88 =2 sbit TI = 0x99;
89 =2 sbit RI = 0x98;
90 =2
91 =2 #endif
26 =1
27 =1 //用户头文件加在最后面
28 =1 //Your head file add here.
2 #include <math.h>
1 =1 /*--------------------------------------------------------------------------
2 =1 MATH.H
3 =1
4 =1 Prototypes for mathematic functions.
5 =1 Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 #ifndef __MATH_H__
10 =1 #define __MATH_H__
11 =1
12 =1 #pragma SAVE
13 =1 #pragma REGPARMS
14 =1 extern char cabs (char val);
15 =1 extern int abs (int val);
16 =1 extern long labs (long val);
17 =1 extern float fabs (float val);
18 =1 extern float sqrt (float val);
19 =1 extern float exp (float val);
20 =1 extern float log (float val);
C51 COMPILER V7.50 LIGHT_STRUCT 03/31/2006 10:11:25 PAGE 15
21 =1 extern float log10 (float val);
22 =1 extern float sin (float val);
23 =1 extern float cos (float val);
24 =1 extern float tan (float val);
25 =1 extern float asin (float val);
26 =1 extern float acos (float val);
27 =1 extern float atan (float val);
28 =1 extern float sinh (float val);
29 =1 extern float cosh (float val);
30 =1 extern float tanh (float val);
31 =1 extern float atan2 (float y, float x);
32 =1
33 =1 extern float ceil (float val);
34 =1 extern float floor (float val);
35 =1 extern float modf (float val, float *n);
36 =1 extern float fmod (float x, float y);
37 =1 extern float pow (float x, float y);
38 =1
39 =1 #pragma RESTORE
40 =1
41 =1 #endif
3 #include "stdio.h"
1 =1 /*--------------------------------------------------------------------------
2 =1 STDIO.H
3 =1
4 =1 Prototypes for standard I/O functions.
5 =1 Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 #ifndef __STDIO_H__
10 =1 #define __STDIO_H__
11 =1
12 =1 #ifndef EOF
13 =1 #define EOF -1
14 =1 #endif
15 =1
16 =1 #ifndef NULL
17 =1 #define NULL ((void *) 0)
18 =1 #endif
19 =1
20 =1 #ifndef _SIZE_T
21 =1 #define _SIZE_T
22 =1 typedef unsigned int size_t;
23 =1 #endif
24 =1
25 =1 #pragma SAVE
26 =1 #pragma REGPARMS
27 =1 extern char _getkey (void);
28 =1 extern char getchar (void);
29 =1 extern char ungetchar (char);
30 =1 extern char putchar (char);
31 =1 extern int printf (const char *, ...);
32 =1 extern int sprintf (char *, const char *, ...);
33 =1 extern int vprintf (const char *, char *);
34 =1 extern int vsprintf (char *, const char *, char *);
35 =1 extern char *gets (char *, int n);
36 =1 extern int scanf (const char *, ...);
37 =1 extern int sscanf (char *, const char *, ...);
38 =1 extern int puts (const char *);
39 =1
40 =1 #pragma RESTORE
C51 COMPILER V7.50 LIGHT_STRUCT 03/31/2006 10:11:25 PAGE 16
41 =1
42 =1 #endif
43 =1
4 #include "stdlib.h"
1 =1 /*--------------------------------------------------------------------------
2 =1 STDLIB.H
3 =1
4 =1 Standard functions.
5 =1 Copyright (c) 1988-2002 Keil Elektronik GmbH and Keil Software, Inc.
6 =1 All rights reserved.
7 =1 --------------------------------------------------------------------------*/
8 =1
9 =1 #ifndef __STDLIB_H__
10 =1 #define __STDLIB_H__
11 =1
12 =1 #ifndef _SIZE_T
=1 #define _SIZE_T
=1 typedef unsigned int size_t;
=1 #endif
16 =1
17 =1 #ifndef NULL
=1 #define NULL ((void *) 0L)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -