xtest10_4.c

AT91sam7s 256 B/D example

/* ========================================================================== */
/*	 Xtest10_4.c : Digital Clock with Time Adjust by RTT Interrupt	      */
/* ========================================================================== */
/*			  Designed and programmed by Duck-Yong Yoon in 2007.  */

#include "AT91SAM7S256.h"
#include "lib_AT91SAM7S256.h"
#include "OK7S256ads.h"

volatile unsigned int RTT_flag=0;		// RTT interrupt flag
volatile unsigned int cursor, second, minute, hour, ampm; // time variable

void LCD_2d(unsigned int number)		/* display 2-digit decimal number */
{
  LCD_data(number/10 + '0');                    // 10^1
  LCD_data(number%10 + '0');                    // 10^0
}

void Cursor_left(void)			        /* go cursor left */
{
  if(cursor != 0xC3) cursor -= 3;
  else               cursor = 0xCF;
  LCD_command(cursor);
}

void Increment(void)	               		/* increment time */
{
  switch(cursor)
    { case 0xC3 : if(hour != 12) hour++;	// in case of hour
                  else           hour = 1;
                  LCD_command(0xC2); LCD_2d(hour);
                  LCD_command(cursor);
                  break;
      case 0xC6 : if(minute != 59) minute++;	// in case of minute
                  else             minute = 0;
                  LCD_command(0xC5); LCD_2d(minute);
                  LCD_command(cursor);
                  break;
      case 0xC9 : if(second != 59) second++;	// in case of second
                  else             second = 0;
                  LCD_command(0xC8); LCD_2d(second);
                  LCD_command(cursor);
                  break;
      case 0xCC : if(ampm == 'A') ampm = 'P';	// in case of AM/PM
                  else            ampm = 'A';
                  LCD_command(0xCB); LCD_data(ampm);
                  LCD_command(cursor);
                  break;
      default   : break;
    }
}

void RTT_ISR(void)				/* RTT interrupt service routine */
{
  AT91F_RTTGetStatus(AT91C_BASE_RTTC);		// clear RTTINC

  RTT_flag ^= 0x01;				// toggle RTT_flag(2Hz/2 = 1Hz)

  if(RTT_flag == 0)				// blink semicolon
    { LCD_command(0xC4); LCD_data(':');
      LCD_command(0xC7); LCD_data(':');
    }
  else
    { LCD_command(0xC4); LCD_data(' ');
      LCD_command(0xC7); LCD_data(' ');
    }
  LCD_command(cursor);				// go cursor position

  if(RTT_flag != 0) return;			// display time once per second

  second++;					// increment second
  if(second == 60)                              // if second = 60, second = 0
    { second = 0;
      minute++;                                 // increment minute
      if(minute == 60)                          // if minute = 60, minute = 0
        { minute = 0;
          hour++;                               // increment hour
          if(hour == 13)                        // if hour = 13, hour = 1
            hour = 1;
          if(hour == 12)                        // if hour = 12, adjust AM/PM
            { if(ampm == 'A') ampm = 'P';
              else            ampm = 'A';
            }
        }
     }

  LCD_command(0xC2); LCD_2d(hour);		// display hour
  LCD_command(0xC5); LCD_2d(minute);		// display minute
  LCD_command(0xC8); LCD_2d(second);		// display second
  LCD_command(0xCB); LCD_data(ampm);		// display AM/PM
  LCD_command(cursor);				// go cursor position
}

int main(void)
{
  MCU_initialize();				// initialize AT91SAM7S256 & kit
  Delay_ms(50);					// wait for system stabilization
  LCD_initialize();				// initialize text LCD module

  cursor = 0xCF;				// initial cursor position
  LCD_command(0x0F);				// cursor ON

  hour = 12;					// initial time
  minute = 0;
  second = 0;
  ampm = 'A';

  LCD_string(0x80," Digital Clock  ");		// display title
  LCD_string(0xC0,"  12:00:00 AM   ");
  Beep();

  AT91F_RTTC_CfgPMC();				// enable peripheral clock for RTT
  AT91F_RTTRestart(AT91C_BASE_RTTC);		// clear and restart RTT
  AT91F_RTTSetPrescaler(AT91C_BASE_RTTC,16384);	// 32.768kHz/16384 = 2Hz

  AT91F_RTTSetRttIncINT(AT91C_BASE_RTTC);	// initialize RTT interrupt
  AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,AT91C_ID_SYS,7,1,RTT_ISR);
  AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_SYS);

  while(1)
    { switch(Key_input())			// key input
        { case 0x01 : Increment();		// if KEY1, increment time
                      break;
          case 0x02 : Cursor_left();		// if KEY2, go cursor left
                      break;
          default   : break;
        }
    }
}