xtest14_10.c

AT91sam7s 256 B/D example

/* ========================================================================== */
/*	 Xtest14_10.c : RS-232C Communication by USART0 RXRDY Interrupt	      */
/* ========================================================================== */
/*			  Designed and programmed by Duck-Yong Yoon in 2007.  */

#include "AT91SAM7S256.h"
#include "lib_AT91SAM7S256.h"
#include "OK7S256ads.h"

volatile unsigned int cursor;			// cursor position of text LCD

void USART0_RX_ISR(void)			/* USART0 interrupt service routine */
{
  LCD_data(*AT91C_US0_RHR);			// display a received character
  cursor++;					// 16 character OK ?
  if(cursor == 16)
    { LCD_command(0xC0);			// if yes, go home
      cursor = 0;
      Beep();
    }
}

void USART0_TX_char(unsigned int data)		/* transmit a character by USART0 */
{
  while(!(*AT91C_US0_CSR & 0x0002));		// wait until TXRDY=1

  *AT91C_US0_THR = data;			// transmit a character
}

void USART0_string(char *string)		/* transmit a string by USART0 */
{
  while(*string != '\0')
    { USART0_TX_char(*string);
       string++;
    }
}

int main(void)
{
  MCU_initialize();				// initialize AT91SAM7S256 & kit
  Delay_ms(50);					// wait for system stabilization
  LCD_initialize();				// initialize text LCD

  LCD_string(0x80,"RS-232C (USART0)");		// display title
  LCD_string(0xC0,"                ");
  Beep();

  LCD_command(0x0F);                            // cursor ON
  LCD_command(0xC0);                            // initial cursor position
  cursor = 0;

  AT91F_US0_CfgPMC();				// enable clock of USART0
  AT91F_PIO_CfgPeriph(AT91C_BASE_PIOA,AT91C_PA6_TXD0|AT91C_PA5_RXD0,0);
						// TXD0, RXD0 by Peripheral A

  *AT91C_US0_MR = 0x100008C0;			// normal mode, no parity
						// 8 data, 1 stop, LSB first, 16x
  *AT91C_US0_BRGR = 26;				// MCK/16/26 = 115200 bps
  *AT91C_US0_CR = 0x00000150;			// TX, RX enable

  AT91F_US_EnableIt(AT91C_BASE_US0,AT91C_US_RXRDY); // USART0 RXRDY interrupt
  AT91F_AIC_ConfigureIt(AT91C_BASE_AIC,AT91C_ID_US0,7,1,USART0_RX_ISR);
  AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_US0);

  while(1)
    { switch(Key_input())                       // key input
        { case 1 : LED_on(LED1); LED_off(LED2);	// KEY1 ?
                   USART0_string("  KEY1 is OK !  ");
                   USART0_TX_char(0x0D);
                   USART0_TX_char(0x0A);
                   break;
          case 2 : LED_on(LED2); LED_off(LED1);	// KEY2 ?
                   USART0_string("  KEY2 is OK !  ");
                   USART0_TX_char(0x0D);
                   USART0_TX_char(0x0A);
                   break;
          default: break;
        }
    }
}