main.c

关于DM642片上支持库CSL的几个例程

/*
 *  Copyright 2003 by Texas Instruments Incorporated.
 *  All rights reserved. Property of Texas Instruments Incorporated.
 *  Restricted rights to use, duplicate or disclose this code are
 *  granted through contract.
 *  
 */
/* "@(#) DSP/BIOS 4.90.270 06-11-03 (barracuda-m10)" */
/****************************************************************************\
 *           Copyright (C) 2001 Texas Instruments Incorporated.             *
 *                           All Rights Reserved                            *
 ****************************************************************************
 * VcpProcessing_BIOS.pjt                                                   *
 *                                                                          *
 
 * The purpose of this project is to demonstrate how to use the Viterbi Co- *
 * Processor (VCP) using the Chip Support Library (CSL) and BIOS modules.   *
 *                                                                          *
 * User data, residing in the tcpuserx.asm files included with this project *
 * is processed through the VCP. The VCP is configured based on the channel *
 * parameters set in vcp_parameters.h. This software handles the VCP, EDMA, *
 * and interrupt configuration necessary to process each user channel.      *
 * LOG module generates messages via a specific window :                    *
 *                    DSP/BIOS -> Message Log                               *
 * Run Project in Real Time Mode - Debug ->Real-Time Mode                   *  
 * Set Breakpoint at line 144   SEM_post(&semVcpFree);                      *                                                    *
 *                                                                          *
\****************************************************************************/

#include <csl.h>
#include <csl_irq.h>
#include <csl_vcp.h>
#include <csl_edma.h>

/* Include files for DSP/BIOS */
#include <std.h>
#include <log.h>
#include <swi.h>
#include <sem.h>
#include <clk.h>
#include <sts.h>          
#include <rtdx.h>  
#include <tsk.h>   
#include <mem.h>
#include <hwi.h>

#include <VcpProcessingcfg.h>

/* Other includes */
#include "vcp_parameters.h"

/* Prototype declarations */
void intConfig(void);
Int32 checkResults(Uint32 *actual, Uint32 *reference, Uint32 size);
void hwiEdma(void);
void submitEdma(VCP_UserData *userData, VCP_Params *vcpParameters,
                Uint32 **decisions, Uint32 **outParms,
                VCP_ConfigIc **configIc, Uint32 *numDec);

/* Global variable declarations */
extern Uint32 ISRAM;             /* Memory space used for buffer allocation */

/* Global variable declarations */
int tcc = -1;                    /* Transfer completion code used by EDMA   */
EDMA_Handle hEdmaRevt,           /* EDMA channel used for Hard Decisions    */
            hEdmaXevt,           /* EDMA channel used for IC Values         */
            hEdmaBrMet,          /* EDMA channel used for Branch Metrics    */
                                 /*      data                               */
            hEdmaOutPar,         /* EDMA channel used for Output Parameters */
            hEdmaNull;           /* EDMA NULL channel used for termination  */


/****************************************************************************\
 * main function                                                            *
\****************************************************************************/
void
main(void)
{
    /* Announce beginning of program */
    LOG_printf(&trace, "DSP/BIOS program started");

    /* Initialize the EDMA interrupt */
    intConfig();
    
    /* "Free" the VCP to the system */
    SEM_post(&semVcpFree);
    
    /* Following main() the system will drop into the task manager */
    return;

} /* end main() */


/****************************************************************************\
 * tskUserChannel: The user channel task. This is the task software used by *
 * each of the user channels to obtain the VCP, establish memory buffers,   *
 * program the EDMA, and process the user channel data.                     *
\****************************************************************************/
void
tskUserChannel(Uint32 channelNum)
{
volatile Uint32 error = 0;
Uint32 *decisions, *outParms, numDec;
VCP_ConfigIc *configIc;
Uint32 iteration = 0;

  while(1){                /* Repeat processing of the user channel forever */

    /* Announce beginning of channel processing */
    LOG_printf(&trace, "Starting Channel %d. Iteration %d",
               channelNum, iteration++);
    
    /* Wait for VCP coprocessor to be available */   
    LOG_printf(&trace, "Channel %d waiting for VCP", channelNum);
    SEM_pend(&semVcpFree, SYS_FOREVER);       /* Pend on available hardware */
    SEM_reset(&semVcpFree, 0);                /* Lock out other tasks       */
    
    /* Program EDMA to service User Channel */
    submitEdma(userData[channelNum], &vcpParameters[channelNum], &decisions,
                                               &outParms, &configIc, &numDec);

    /* Announce that the VCP is being used to process the channel data      */
    LOG_printf(&trace, "Channel %d using the VCP", channelNum);
    
    /* Start the VCP to begin the EDMA transfers */
    VCP_start();

    /* Wait on viterbi decode to complete. The task pends on a semaphore  */
    /* that is set in the EDMA interrupt service routine.                 */
    LOG_printf(&trace, "Channel %d awaiting VCP completion", channelNum);
    SEM_pend(&semVcpDone, SYS_FOREVER);     /* Pend on completion semaphore */
    SEM_reset(&semVcpDone, 0);              /* Clear the semaphore          */
    LOG_printf(&trace, "Channel %d decode complete", channelNum);
          
    /* Verify the coprocessing results by comparing received decisions and*/
    /* output parameters to programmed reference data. A value of "0"     */
    /* indicates that no error was present. A non-zero value indicates an */
    /* error occurred.                                                    */
    error = checkResults(decisions, referenceDec[channelNum],
                           vcpParameters[channelNum].frameLen);
    /* Report the error status */
    LOG_printf(&trace, "User channel %d completed with %d error(s)",
               channelNum, error);
    
    /* Free memory spaces back to the system */
    MEM_free(ISRAM, decisions, numDec     * sizeof(Uint32));
    MEM_free(ISRAM, outParms , VCP_NUM_OP * sizeof(Uint32));
    MEM_free(ISRAM, configIc , VCP_NUM_IC * sizeof(Uint32));
    
    /* Reset VCP available semaphore to allow another channel to use it */
    SEM_post(&semVcpFree);
  } /* end while(1) */
    
} /* end main */ 


/****************************************************************************\
 * intConfig: Configure the CPU interrupt controller to receive interrupts  *
 * from the EDMA.                                                           *
\****************************************************************************/
void
intConfig(void)
{
    IRQ_enable(IRQ_EVT_EDMAINT);          /* Enable EDMA -> CPU interrupt   */
    IRQ_nmiEnable();                      /* Enable non-maskable interrupt  */
    IRQ_globalEnable();                   /* Globally enable all interrupts */

} /* end intConfig() */


/****************************************************************************\
 * checkResults: Verify that the hard decisions and output parameters sent  *
 * by the VCP are correct. If the hard decisions are not correct, the index *
 * of the first incorrect value is returned. If the output parameters (the  *
 * number of iterations) is not correct, then a -1 is returned. If all      *
 * values are correct then a 0 is returned.                                 *
\****************************************************************************/
Int32
checkResults(Uint32 *actual ,Uint32 *reference, Uint32 size) 
{
Uint32 i;
Uint32 mismatch=0;
Uint32 numWords = size>>5;
    
    /* Directly compare received values to reference values for 32 valid    */
    /* bits.                                                                */
    for (i=0; i<numWords; i++) {
      if (actual[i]!=reference[i]) {
        mismatch++;
        break;
      } /* end if actual != reference */
    } /* end for i */
    
    /* Compare last halfword. */
    if ((!mismatch) && (size & 1)) {    
      if ((short)actual[i] != (short)reference[i]) mismatch++;
    } /* end if */

    if (mismatch) return(i+1); /* return index for 1st error that occured. */
                               /* Index will range from 1 to framelength   */
    else return(0);            /* no error */
    
} /* end checkResults() */