app.ss

AMIS單晶片開發範本

// ---------------------------------------------------------------------------
// Copyright (c) 2008 Semiconductor Components Industries, LLC
// (d/b/a ON Semiconductor). All Rights Reserved.
//
// This code is the property of ON Semiconductor and may not be redistributed
// in any form without prior written permission from ON Semiconductor. The
// terms of use and warranty for this code are covered by contractual
// agreements between ON Semiconductor and the licensee.
// ---------------------------------------------------------------------------
// app.ss
// - Main application-level source file
// ---------------------------------------------------------------------------
// $Revision: 1.16 $
// $Date: 2008/10/29 18:00:25 $
// ---------------------------------------------------------------------------
#include <sk25_hw.inc>
#include <boss.inc>
#include <bat.inc>
#include "app.inc"
#include "Tone.inc"

// ---------------------------------------------------------------------------
// Application Version
// ---------------------------------------------------------------------------

// Set the global assembler symbol App_Version equal to the
// pre-processor define APP_VERSION that was defined in app.inc
.global App_Version
    .equ App_Version, APP_VERSION

// ---------------------------------------------------------------------------
// Main
// ---------------------------------------------------------------------------
    Mem_Start_Absolute_Segment(app_main_segment, SYSTEM_MEMORY_TYPE_P, 0x1000)

.global main
main:
    // Clear the status register
    CLR ST

    BRA start_app
    
    // Put the application version in P memory at address 0x1003
.data App_Version    
    
    // Put the tone generation version in P memory
.data Tone_Version

start_app:

    // Set up stack pointers
    LDI R3, SYS_STACK_TOP
    LDI R7, USR_STACK_TOP
  
    // For development purposes, disable restricted mode to make it easier
    // to download a new application.
    // REMOVE THESE LINES IN YOUR FINAL APPLICATION IF YOU REQUIRE
    // RESTRICTED MODE
    LDI R4, D_ACCESS_CFG
    RES (R4), ACCESS_CFG_ACCESS_MODE_POS    

    // Call the application's initialization routine
    CALL App_Initialize

    // Call any algorithm-specific initialization routines here
    CALL Tone_Initialize

    // Turn on overflow protection in Status Register
    SET ST, ST_OP

    // Configure and start the IOP
    Set_IOP_Cfg(IOP_CFG)

    // Clear any interrupt requests that may be pending
    Interrupt_Ack(INT_ACK_ALL_INTS)
    
    // Enable interrupts
    Enable_Int

// ---------------------------------------------------------------------------
// Main loop 
// ---------------------------------------------------------------------------
mainloop:
    
    // Disable interrupts while checking flags
    Disable_Int 

    // Check the interrupt flags
    LD A, XL_INTERRUPT_FLAGS, X
    
    // Check IOP interrupt done flag
    TST AH, IOP_INTERRUPT_FLAG
    BRA iop_done, NZ    
    
    // Check the WOLA interrupt flag
    TST AH, WOLA_INTERRUPT_FLAG
    BRA process_wola_interrupt, NZ
                        
    // Refresh the Watchdog
    Watchdog_Refresh

    // Re-enable interrupts and sleep until an interrupt is received.
    SLEEP IE

    // Loop back to see which interrupt has occurred
    BRA mainloop    


// ---------------------------------------------------------------------------
// IOP done
// ---------------------------------------------------------------------------
iop_done:

    // Clear the IOP done flag
    RES AH, IOP_INTERRUPT_FLAG
    LD XL_INTERRUPT_FLAGS, A, X

    // Re-enable interrupts
    Enable_Int
    
    // Do Pre-Analysis processing here

    // Advance the WOLA state
    LDSI A, WOLA_STATE_ANALYSIS
    LD XL_WOLA_STATE, A, X
    
    // Launch WOLA Analysis
    WOLA_Start(UCODE_ANALYSIS_FUNCTION)

    // Do While Analysis processing here

    // Check if any more interrupts have occurred
    BRA mainloop    


// ---------------------------------------------------------------------------
// Process WOLA interrupt
// ---------------------------------------------------------------------------               
process_wola_interrupt:

    // Clear WOLA interrupt flag
    RES AH, WOLA_INTERRUPT_FLAG
    LD XL_INTERRUPT_FLAGS, A, X

    // Re-enable interrupts
    Enable_Int  

    // Determine which WOLA function just completed
    LD A, XL_WOLA_STATE, X

    // Check for Analysis done
    CMSI A, WOLA_STATE_ANALYSIS
    BRA wola_analysis_done, Z

    // Check for Gain Application done
    CMSI A, WOLA_STATE_GAIN
    BRA wola_gain_application_done, Z

    // Check for Synthesis done
    CMSI A, WOLA_STATE_SYNTHESIS
    BRA wola_synthesis_done, Z

    // Shouldn抰 get here - break if debugging
    BREAK
    BRA mainloop


// ---------------------------------------------------------------------------
// WOLA Analysis done
// ---------------------------------------------------------------------------
wola_analysis_done:

    // Do Post Analysis processing here

    // Advance the WOLA state
    LDSI A, WOLA_STATE_GAIN
    LD XL_WOLA_STATE, A, X
    
    // Launch WOLA Gain Application
    WOLA_Start(UCODE_GAIN_FUNCTION)

    // Do While Gain Application processing here

    // Check if any more interrupts have occurred
    BRA mainloop    


// ---------------------------------------------------------------------------
// WOLA Gain Application done
// ---------------------------------------------------------------------------
wola_gain_application_done:

    // Do Post Gain Application processing here

    // Advance the WOLA state
    LDSI A, WOLA_STATE_SYNTHESIS
    LD XL_WOLA_STATE, A, X

    // Launch WOLA Synthesis
    WOLA_Start(UCODE_SYNTHESIS_FUNCTION)

    // Do While Synthesis processing here

    // Check if any more interrupts have occurred
    BRA mainloop    


// ---------------------------------------------------------------------------
// WOLA Synthesis done
// ---------------------------------------------------------------------------
wola_synthesis_done:

    // Advance the WOLA state
    LDSI A, WOLA_STATE_IDLE
    LD XL_WOLA_STATE, A, X
  
    // Do Post Synthesis processing here
    CALL Tone_Generation 

    // Check if any more interrupts have occurred
    BRA mainloop