c51gui.opt

51单片机在lcd上实现zlg gui,希望好的请多加点分数

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (C51GUI), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(SRC),1,0,0
GRPOPT 2,(GUI),1,0,0

OPTFFF 1,1,1,754974722,0,111,134,0,<.\main.c><main.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,0,0,0,0,161,2,0,0,56,1,0,0 }
OPTFFF 1,2,1,0,0,0,0,0,<.\delay.c><delay.c> 
OPTFFF 2,3,1,184549376,0,0,0,0,<.\lcmdrv.c><lcmdrv.c> 
OPTFFF 2,4,1,16777216,0,0,0,0,<.\font5_7.c><font5_7.c> 
OPTFFF 2,5,1,33554432,0,0,0,0,<.\GUI_StockC.C><GUI_StockC.C> 
OPTFFF 2,6,1,100663296,0,0,0,0,<.\loadbit.c><loadbit.c> 
OPTFFF 2,7,1,0,0,0,0,0,<.\FONT8_8.C><FONT8_8.C> 
OPTFFF 2,8,1,301989888,0,0,0,0,<.\GUI_BASIC.C><GUI_BASIC.C> 
OPTFFF 2,9,1,603979776,0,0,0,0,<.\menu.c><menu.c> 
OPTFFF 2,10,1,352321536,0,0,0,0,<.\windows.c><windows.c> 

ExtF <.\GUI_CONFIG.H> 44,44,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,166,2,0,0,108,1,0,0 }

TARGOPT 1, (C51GUI)
 CLK51=33000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\LST\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\AT89C51XD2_DS.PDF>
  OPTBL 1,(Instruction Set Manual)<DATASHTS\ATMEL\AT_C51ISM.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pATRD2)(S8051.DLL)()(TP51.DLL)(-pATRD2)
  OPTDBG 48125,-1,()()()()()()()()()() ()()()()
  OPTDF 0x40000002
  OPTLE <>
  OPTLC <>
EndOpt