409877fd93e0001c1f63a99703025034

Hi I send you this document

#daemon configuration
telnet_port 4444
gdb_port 3333

#interface
interface ft2232
ft2232_device_desc "Olimex OpenOCD JTAG A"
ft2232_layout "olimex-jtag"
ft2232_vid_pid 0x15BA 0x0003
jtag_speed 3

#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst separate

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup reset

#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
run_and_halt_time 0 30

#target_script 0 reset oocd_flash2138.script
working_area 0 0x40000000 0x7fff nobackup

#flash configuration
#flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14746 calc_checksum
flash bank lpc2000 0x0 0x80000 0 0 0 lpc2000_v2 12000 calc_checksum
#flash bank cfi 0x80000000 0x800000 2 2 0

# For more information about the configuration files, take a look at:
# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger