seg70.syr

Mars-XC2S50-S-Core-V2.0开发板核心板的说明和设计文档

Release 7.1.04i - xst H.42
Copyright (c) 1995-2005 Xilinx, Inc.  All rights reserved.
--> Parameter TMPDIR set to __projnav
CPU : 0.00 / 0.61 s | Elapsed : 0.00 / 0.00 s
 
--> Parameter xsthdpdir set to ./xst
CPU : 0.00 / 0.61 s | Elapsed : 0.00 / 0.00 s
 
--> Reading design: seg70.prj

TABLE OF CONTENTS
  1) Synthesis Options Summary
  2) HDL Compilation
  3) HDL Analysis
  4) HDL Synthesis
  5) Advanced HDL Synthesis
     5.1) HDL Synthesis Report
  6) Low Level Synthesis
  7) Final Report
     7.1) Device utilization summary
     7.2) TIMING REPORT


=========================================================================
*                      Synthesis Options Summary                        *
=========================================================================
---- Source Parameters
Input File Name                    : "seg70.prj"
Input Format                       : mixed
Ignore Synthesis Constraint File   : NO

---- Target Parameters
Output File Name                   : "seg70"
Output Format                      : NGC
Target Device                      : xc2s50-6-TQ144

---- Source Options
Top Module Name                    : seg70
Automatic FSM Extraction           : YES
FSM Encoding Algorithm             : Auto
FSM Style                          : lut
RAM Extraction                     : Yes
RAM Style                          : Auto
ROM Extraction                     : Yes
ROM Style                          : Auto
Mux Extraction                     : YES
Mux Style                          : Auto
Decoder Extraction                 : YES
Priority Encoder Extraction        : YES
Shift Register Extraction          : YES
Logical Shifter Extraction         : YES
XOR Collapsing                     : YES
Resource Sharing                   : YES
Multiplier Style                   : lut
Automatic Register Balancing       : No

---- Target Options
Add IO Buffers                     : YES
Global Maximum Fanout              : 100
Add Generic Clock Buffer(BUFG)     : 4
Register Duplication               : YES
Equivalent register Removal        : YES
Slice Packing                      : YES
Pack IO Registers into IOBs        : auto

---- General Options
Optimization Goal                  : Speed
Optimization Effort                : 1
Keep Hierarchy                     : NO
Global Optimization                : AllClockNets
RTL Output                         : Yes
Write Timing Constraints           : NO
Hierarchy Separator                : /
Bus Delimiter                      : <>
Case Specifier                     : maintain
Slice Utilization Ratio            : 100
Slice Utilization Ratio Delta      : 5

---- Other Options
lso                                : seg70.lso
Read Cores                         : YES
cross_clock_analysis               : NO
verilog2001                        : YES
safe_implementation                : No
Optimize Instantiated Primitives   : NO
tristate2logic                     : Yes
use_clock_enable                   : Yes
use_sync_set                       : Yes
use_sync_reset                     : Yes
enable_auto_floorplanning          : No

=========================================================================


=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling verilog file "seg70.v"
Module <seg70> compiled
No errors in compilation
Analysis of file <"seg70.prj"> succeeded.
 

=========================================================================
*                            HDL Analysis                               *
=========================================================================
Analyzing top module <seg70>.
Module <seg70> is correct for synthesis.
 

=========================================================================
*                           HDL Synthesis                               *
=========================================================================

Synthesizing Unit <seg70>.
    Related source file is "seg70.v".
INFO:Xst:2117 - HDL ADVISOR - Mux Selector <dataout_buf> of Case statement line 60 was re-encoded using one-hot encoding. The case statement will be optimized (default statement optimization), but this optimization may lead to design initialization problems. To ensure the design works safely, you can:
   	- add an 'init' attribute on signal <dataout_buf> (optimization is then done without any risk)
   	- use the attribute 'signal_encoding user' to avoid onehot optimization
   	- use the attribute 'safe_implementation yes' to force XST to perform a safe (but less efficient) optimization
    Using one-hot encoding for signal <dataout_buf>.
    Found 8-bit register for signal <en>.
    Found 16-bit up counter for signal <cnt_scan>.
    Summary:
	inferred   1 Counter(s).
	inferred   8 D-type flip-flop(s).
Unit <seg70> synthesized.


=========================================================================
*                       Advanced HDL Synthesis                          *
=========================================================================

Advanced RAM inference ...
Advanced multiplier inference ...
Advanced Registered AddSub inference ...
Dynamic shift register inference ...

=========================================================================
HDL Synthesis Report

Macro Statistics
# Counters                         : 1
 16-bit up counter                 : 1
# Registers                        : 8
 1-bit register                    : 8

=========================================================================

=========================================================================
*                         Low Level Synthesis                           *
=========================================================================

Optimizing unit <seg70> ...
Loading device for application Rf_Device from file 'v50.nph' in environment D:/Xilinx.

Mapping all equations...
Building and optimizing final netlist ...
Found area constraint ratio of 100 (+ 5) on block seg70, actual ratio is 2.

=========================================================================
*                            Final Report                               *
=========================================================================
Final Results
RTL Top Level Output File Name     : seg70.ngr
Top Level Output File Name         : seg70
Output Format                      : NGC
Optimization Goal                  : Speed
Keep Hierarchy                     : NO

Design Statistics
# IOs                              : 18

Macro Statistics :
# Registers                        : 9
#      1-bit register              : 8
#      16-bit register             : 1
# Adders/Subtractors               : 1
#      16-bit adder                : 1

Cell Usage :
# BELS                             : 71
#      GND                         : 1
#      INV                         : 2
#      LUT1                        : 1
#      LUT1_L                      : 14
#      LUT2                        : 3
#      LUT4                        : 18
#      LUT4_L                      : 1
#      MUXCY                       : 15
#      VCC                         : 1
#      XORCY                       : 15
# FlipFlops/Latches                : 24
#      FDR                         : 16
#      FDRE                        : 1
#      FDSE                        : 7
# Clock Buffers                    : 1
#      BUFGP                       : 1
# IO Buffers                       : 17
#      IBUF                        : 1
#      OBUF                        : 16
=========================================================================

Device utilization summary:
---------------------------

Selected Device : 2s50tq144-6 

 Number of Slices:                      23  out of    768     2%  
 Number of Slice Flip Flops:            24  out of   1536     1%  
 Number of 4 input LUTs:                37  out of   1536     2%  
 Number of bonded IOBs:                 18  out of     96    18%  
 Number of GCLKs:                        1  out of      4    25%  


=========================================================================
TIMING REPORT

NOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.
      FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT
      GENERATED AFTER PLACE-and-ROUTE.

Clock Information:
------------------
-----------------------------------+------------------------+-------+
Clock Signal                       | Clock buffer(FF name)  | Load  |
-----------------------------------+------------------------+-------+
clk                                | BUFGP                  | 24    |
-----------------------------------+------------------------+-------+

Timing Summary:
---------------
Speed Grade: -6

   Minimum period: 7.155ns (Maximum Frequency: 139.762MHz)
   Minimum input arrival time before clock: 6.154ns
   Maximum output required time after clock: 12.755ns
   Maximum combinational path delay: No path found

Timing Detail:
--------------
All values displayed in nanoseconds (ns)

=========================================================================
Timing constraint: Default period analysis for Clock 'clk'
  Clock period: 7.155ns (frequency: 139.762MHz)
  Total number of paths / destination ports: 272 / 32
-------------------------------------------------------------------------
Delay:               7.155ns (Levels of Logic = 2)
  Source:            cnt_scan_4 (FF)
  Destination:       en_0 (FF)
  Source Clock:      clk rising
  Destination Clock: clk rising

  Data Path: cnt_scan_4 to en_0
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     FDR:C->Q              2   1.085   1.206  cnt_scan_4 (cnt_scan_4)
     LUT4:I0->O            1   0.549   1.035  _n00009 (CHOICE217)
     LUT4:I1->O            8   0.549   1.845  _n000035 (_n0000)
     FDSE:CE                   0.886          en_6
    ----------------------------------------
    Total                      7.155ns (3.069ns logic, 4.086ns route)
                                       (42.9% logic, 57.1% route)

=========================================================================
Timing constraint: Default OFFSET IN BEFORE for Clock 'clk'
  Total number of paths / destination ports: 24 / 24
-------------------------------------------------------------------------
Offset:              6.154ns (Levels of Logic = 2)
  Source:            rst (PAD)
  Destination:       en_0 (FF)
  Destination Clock: clk rising

  Data Path: rst to en_0
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     IBUF:I->O             1   0.776   1.035  rst_IBUF (rst_IBUF)
     INV:I->O             24   0.549   3.060  en_1_N01_INV_0 (en_1_N0)
     FDSE:S                    0.734          en_1
    ----------------------------------------
    Total                      6.154ns (2.059ns logic, 4.095ns route)
                                       (33.5% logic, 66.5% route)

=========================================================================
Timing constraint: Default OFFSET OUT AFTER for Clock 'clk'
  Total number of paths / destination ports: 78 / 15
-------------------------------------------------------------------------
Offset:              12.755ns (Levels of Logic = 4)
  Source:            en_5 (FF)
  Destination:       dataout<4> (PAD)
  Source Clock:      clk rising

  Data Path: en_5 to dataout<4>
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     FDSE:C->Q             9   1.085   1.908  en_5 (en_5)
     LUT4:I2->O            2   0.549   1.206  Ker71 (N7)
     LUT4:I3->O            2   0.549   1.206  Ker5 (N5)
     LUT4:I3->O            1   0.549   1.035  dataout<4> (dataout_4_OBUF)
     OBUF:I->O                 4.668          dataout_4_OBUF (dataout<4>)
    ----------------------------------------
    Total                     12.755ns (7.400ns logic, 5.355ns route)
                                       (58.0% logic, 42.0% route)

=========================================================================
CPU : 8.49 / 9.19 s | Elapsed : 9.00 / 9.00 s
 
--> 

Total memory usage is 74756 kilobytes

Number of errors   :    0 (   0 filtered)
Number of warnings :    0 (   0 filtered)
Number of infos    :    1 (   0 filtered)