serial.syr

Mars-XC2S50-S-Core-V2.0开发板核心板的说明和设计文档

Release 7.1.04i - xst H.42
Copyright (c) 1995-2005 Xilinx, Inc.  All rights reserved.
--> Parameter TMPDIR set to __projnav
CPU : 0.00 / 0.83 s | Elapsed : 0.00 / 1.00 s
 
--> Parameter xsthdpdir set to ./xst
CPU : 0.00 / 0.83 s | Elapsed : 0.00 / 1.00 s
 
--> Reading design: serial.prj

TABLE OF CONTENTS
  1) Synthesis Options Summary
  2) HDL Compilation
  3) HDL Analysis
  4) HDL Synthesis
  5) Advanced HDL Synthesis
     5.1) HDL Synthesis Report
  6) Low Level Synthesis
  7) Final Report
     7.1) Device utilization summary
     7.2) TIMING REPORT


=========================================================================
*                      Synthesis Options Summary                        *
=========================================================================
---- Source Parameters
Input File Name                    : "serial.prj"
Input Format                       : mixed
Ignore Synthesis Constraint File   : NO

---- Target Parameters
Output File Name                   : "serial"
Output Format                      : NGC
Target Device                      : xc2s50-6-TQ144

---- Source Options
Top Module Name                    : serial
Automatic FSM Extraction           : YES
FSM Encoding Algorithm             : Auto
FSM Style                          : lut
RAM Extraction                     : Yes
RAM Style                          : Auto
ROM Extraction                     : Yes
ROM Style                          : Auto
Mux Extraction                     : YES
Mux Style                          : Auto
Decoder Extraction                 : YES
Priority Encoder Extraction        : YES
Shift Register Extraction          : YES
Logical Shifter Extraction         : YES
XOR Collapsing                     : YES
Resource Sharing                   : YES
Multiplier Style                   : lut
Automatic Register Balancing       : No

---- Target Options
Add IO Buffers                     : YES
Global Maximum Fanout              : 100
Add Generic Clock Buffer(BUFG)     : 4
Register Duplication               : YES
Equivalent register Removal        : YES
Slice Packing                      : YES
Pack IO Registers into IOBs        : auto

---- General Options
Optimization Goal                  : Speed
Optimization Effort                : 1
Keep Hierarchy                     : NO
Global Optimization                : AllClockNets
RTL Output                         : Yes
Write Timing Constraints           : NO
Hierarchy Separator                : /
Bus Delimiter                      : <>
Case Specifier                     : maintain
Slice Utilization Ratio            : 100
Slice Utilization Ratio Delta      : 5

---- Other Options
lso                                : serial.lso
Read Cores                         : YES
cross_clock_analysis               : NO
verilog2001                        : YES
safe_implementation                : No
Optimize Instantiated Primitives   : NO
tristate2logic                     : Yes
use_clock_enable                   : Yes
use_sync_set                       : Yes
use_sync_reset                     : Yes
enable_auto_floorplanning          : No

=========================================================================


=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling verilog file "serial.v"
Module <serial> compiled
No errors in compilation
Analysis of file <"serial.prj"> succeeded.
 

=========================================================================
*                            HDL Analysis                               *
=========================================================================
Analyzing top module <serial>.
	div_par = <u>0000000100000100
Module <serial> is correct for synthesis.
 

=========================================================================
*                           HDL Synthesis                               *
=========================================================================
INFO:Xst:1304 - Contents of register <txd_buf<7>> in unit <serial> never changes during circuit operation. The register is replaced by logic.

Synthesizing Unit <serial>.
    Related source file is "serial.v".
    Found 4-bit 4-to-1 multiplexer for signal <$n0024>.
    Found 4-bit adder for signal <$n0029> created at line 270.
    Found 4-bit adder for signal <$n0030> created at line 305.
    Found 4-bit comparator greatequal for signal <$n0078> created at line 301.
    Found 4-bit comparator lessequal for signal <$n0079> created at line 301.
    Found 4-bit comparator less for signal <$n0081> created at line 301.
    Found 4-bit comparator greater for signal <$n0082> created at line 301.
    Found 3-bit comparator less for signal <$n0088> created at line 169.
    Found 1-bit register for signal <clkbaud8x>.
    Found 20-bit up counter for signal <cnt_delay>.
    Found 3-bit up counter for signal <div8_rec_reg>.
    Found 3-bit up counter for signal <div8_tras_reg>.
    Found 16-bit up counter for signal <div_reg>.
    Found 1-bit register for signal <key_entry1>.
    Found 1-bit register for signal <key_entry2>.
    Found 1-bit register for signal <recstart>.
    Found 1-bit register for signal <recstart_tmp>.
    Found 8-bit register for signal <rxd_buf>.
    Found 1-bit register for signal <rxd_reg1>.
    Found 1-bit register for signal <rxd_reg2>.
    Found 3-bit up counter for signal <send_state>.
    Found 1-bit register for signal <start_delaycnt>.
    Found 4-bit register for signal <state_rec>.
    Found 4-bit register for signal <state_tras>.
    Found 1-bit register for signal <trasstart>.
    Found 7-bit register for signal <txd_buf<6:0>>.
    Found 1-bit register for signal <txd_reg>.
    Summary:
	inferred   5 Counter(s).
	inferred  33 D-type flip-flop(s).
	inferred   2 Adder/Subtractor(s).
	inferred   5 Comparator(s).
	inferred   4 Multiplexer(s).
Unit <serial> synthesized.


=========================================================================
*                       Advanced HDL Synthesis                          *
=========================================================================

Advanced RAM inference ...
Advanced multiplier inference ...
Advanced Registered AddSub inference ...
Dynamic shift register inference ...

=========================================================================
HDL Synthesis Report

Macro Statistics
# Adders/Subtractors               : 2
 4-bit adder                       : 2
# Counters                         : 5
 16-bit up counter                 : 1
 20-bit up counter                 : 1
 3-bit up counter                  : 3
# Registers                        : 27
 1-bit register                    : 25
 4-bit register                    : 2
# Comparators                      : 5
 3-bit comparator less             : 1
 4-bit comparator greatequal       : 1
 4-bit comparator greater          : 1
 4-bit comparator less             : 1
 4-bit comparator lessequal        : 1
# Multiplexers                     : 1
 4-bit 4-to-1 multiplexer          : 1

=========================================================================

=========================================================================
*                         Low Level Synthesis                           *
=========================================================================
WARNING:Xst:1988 - Unit <serial>: instances <Mcompar__n0082>, <Mcompar__n0079> of unit <LPM_COMPARE_4> and unit <LPM_COMPARE_2> are dual, second instance is removed
WARNING:Xst:1988 - Unit <serial>: instances <Mcompar__n0081>, <Mcompar__n0078> of unit <LPM_COMPARE_3> and unit <LPM_COMPARE_1> are dual, second instance is removed

Optimizing unit <serial> ...
Loading device for application Rf_Device from file 'v50.nph' in environment D:/Xilinx.

Mapping all equations...
Building and optimizing final netlist ...
Found area constraint ratio of 100 (+ 5) on block serial, actual ratio is 13.
FlipFlop start_delaycnt has been replicated 1 time(s)

=========================================================================
*                            Final Report                               *
=========================================================================
Final Results
RTL Top Level Output File Name     : serial.ngr
Top Level Output File Name         : serial
Output Format                      : NGC
Optimization Goal                  : Speed
Keep Hierarchy                     : NO

Design Statistics
# IOs                              : 22

Macro Statistics :