serial.gyd

Mars-XC2S50-S-Core-V2.0开发板核心板的说明和设计文档

Pin Freeze File:  version H.42

95144XL144TQ XC95144XL-10-TQ144
clk S:PIN128
key_input S:PIN100
rst S:PIN71
rxd S:PIN77
lowbit S:PIN94
en<7> S:PIN134
en<6> S:PIN133
en<5> S:PIN125
en<4> S:PIN124
en<3> S:PIN120
en<2> S:PIN126
en<1> S:PIN131
en<0> S:PIN132
seg_data<0> S:PIN119
seg_data<1> S:PIN118
seg_data<2> S:PIN116
seg_data<3> S:PIN115
seg_data<4> S:PIN113
seg_data<5> S:PIN111
seg_data<6> S:PIN107
seg_data<7> S:PIN106
txd S:PIN79


;The remaining section of the .gyd file is for documentation purposes only.
;It shows where your internal equations were placed in the last successful fit.

PARTITION FB1_8 div_reg<0> key_entry1 div_reg<1> start_delaycnt
		 cnt_delay<8> cnt_delay<19> cnt_delay<18> cnt_delay<13>
		 cnt_delay<12> cnt_delay<10> cnt_delay<0>
PARTITION FB2_1 send_state<0> div_reg<9> div_reg<7> div_reg<6>
		 div_reg<5> div_reg<4> div_reg<3> div_reg<15>
		 div_reg<14> div_reg<13> div_reg<12> div_reg<11>
		 div_reg<10> clkbaud8x send_state<2> send_state<1>
		 div_reg<8> div_reg<2>
PARTITION FB3_1 EXP10_ txd_buf<4> div8_tras_reg<0> div8_rec_reg<0>
		 state_tras<3> state_tras<2> rxd_reg2 txd_buf<5>
		 EXP11_ state_tras<1> key_entry2 div8_tras_reg<2>
		 div8_tras_reg<1> rxd_reg1 EXP12_ state_tras<0>
		 EXP13_ txd_buf<6>
PARTITION FB4_1 seg_data_1_OBUF lowbit_OBUF$BUF5 lowbit_OBUF$BUF1 EXP14_
		 rxd_buf<6> EXP15_ rxd_buf<5> rxd_buf<4>
		 lowbit_OBUF$BUF6 rxd_buf<3> lowbit_OBUF$BUF7 lowbit_OBUF$BUF0
		 EXP16_ rxd_buf<1> EXP17_ rxd_buf<0>
		 EXP18_ rxd_buf<2>

PARTITION FB6_1 state_rec<2> seg_data_7_OBUF state_rec<1> seg_data_5_OBUF
		 state_rec<3> recstart_tmp recstart seg_data_4_OBUF
		 seg_data_2_OBUF seg_data_3_OBUF seg_data_0_OBUF lowbit_OBUF$BUF4
		 div8_rec_reg<2> div8_rec_reg<1> lowbit_OBUF$BUF3 state_rec<0>
		 lowbit_OBUF$BUF2 rxd_buf<7>
PARTITION FB7_1 EXP19_ EXP20_ EXP21_ txd_buf<1>
		 EXP22_ EXP23_ txd_buf<3> EXP24_
		 EXP25_ txd_reg EXP26_ EXP27_
		 txd_buf<2> EXP28_ txd_buf<0> EXP29_
		 EXP30_ trasstart
PARTITION FB8_4 cnt_delay<9> cnt_delay<7> cnt_delay<6> cnt_delay<5>
		 lowbit_OBUF cnt_delay<4> cnt_delay<3> cnt_delay<2>
		 cnt_delay<1> cnt_delay<17> cnt_delay<16> cnt_delay<15>
		 seg_data_6_OBUF cnt_delay<14> cnt_delay<11>