rarpsend.c,v

来自「TCP-IP红宝书源代码」· C,V 代码 · 共 109 行

head	1.1;
access;
symbols;
locks
	dls:1.1; strict;
comment	@ * @;


1.1
date	97.09.21.19.27.59;	author dls;	state Dist;
branches;
next	;


desc
@@


1.1
log
@pre-3e code
@
text
@/* rarpsend.c - rarpsend */

#include <conf.h>
#include <kernel.h>
#include <network.h>

static struct ep *mkarp();

/*------------------------------------------------------------------------
 *  rarpsend  -  broadcast a RARP packet to obtain my IP address
 *------------------------------------------------------------------------
 */
int rarpsend(ifn)
int	ifn;		/* the interface number */
{
	STATWORD		ps;
	struct	netif		*pni = &nif[ifn];
	struct	ep		*pep;
	int			i, mypid, resp;
	IPaddr			junk = 0; /* arg to mkarp; never used */

	mypid = getpid();
	for (i=0; i<ARP_MAXRETRY; ++i) {
		pep = mkarp(ifn, EPT_RARP, RA_REQUEST, junk, junk);
		if ((int)pep == SYSERR)
			break;
		disable(ps);
		rarppid = mypid;
		restore(ps);
		recvclr();
		write(pni->ni_dev, pep, EP_MINLEN);
		/* ARP_RESEND is in secs, recvtim uses 1/10's of secs	*/
		resp = recvtim(10*ARP_RESEND<<i);
		if (resp != TIMEOUT) {
			/* host route */
			rtadd(pni->ni_ip, ip_maskall, pni->ni_ip, 0,
				NI_LOCAL, RT_INF);

			/* non-subnetted route */
			rtadd(pni->ni_net, ip_maskall, pni->ni_ip, 0,
				NI_LOCAL, RT_INF);

			return OK;
		}
	}
	panic("No response to RARP");
	return SYSERR;
}


/*------------------------------------------------------------------------
 *  mkarp  -  allocate and fill in an ARP or RARP packet
 *------------------------------------------------------------------------
 */
static
struct	ep	*
mkarp(ifn, type, op, spa, tpa)
int	ifn;
short	type;
short	op;
IPaddr	spa;
IPaddr	tpa;
{
	register struct	arp	*parp;
	struct	ep		*pep;

	pep = (struct ep *) getbuf(Net.netpool);
	if ((int)pep == SYSERR)
		return (struct ep *)SYSERR;
	blkcopy(pep->ep_dst, nif[ifn].ni_hwb.ha_addr, EP_ALEN);
	pep->ep_order = ~0;
	pep->ep_type = type;
	parp = (struct arp *)pep->ep_data;
	parp->ar_hwtype = hs2net(AR_HARDWARE);
	parp->ar_prtype = hs2net(EPT_IP);
	parp->ar_hwlen = EP_ALEN;
	parp->ar_prlen = IP_ALEN;
	parp->ar_op = hs2net(op);
	blkcopy(SHA(parp), nif[ifn].ni_hwa.ha_addr, EP_ALEN);
	blkcopy(SPA(parp), &spa, IP_ALEN);
	blkcopy(THA(parp), nif[ifn].ni_hwa.ha_addr, EP_ALEN);
	blkcopy(TPA(parp), &tpa, IP_ALEN);
	return pep;
}
@