mulx.fit

数字秒表具有正及时倒计时功能包括一些设计要求和原资料

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/28/2008 00:06:17      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "mulx"
BEGIN

    DEVICE = "EPF10K20TC144-4";

    "CLK"                          : INPUT_PIN  = 55     ;
    "CLR"                          : INPUT_PIN  = 54     ;
    "EN"                           : INPUT_PIN  = 56     ;
    "HOUR0"                        : INPUT_PIN  = 125    ;
    "HOUR1"                        : INPUT_PIN  = 120    ;
    "HOUR2"                        : INPUT_PIN  = 60     ;
    "HOUR3"                        : INPUT_PIN  = 73     ;
    "M_1MIN0"                      : INPUT_PIN  = 91     ;
    "M_1MIN1"                      : INPUT_PIN  = 59     ;
    "M_1MIN2"                      : INPUT_PIN  = 14     ;
    "M_1MIN3"                      : INPUT_PIN  = 90     ;
    "M_10MIN0"                     : INPUT_PIN  = 116    ;
    "M_10MIN1"                     : INPUT_PIN  = 121    ;
    "M_10MIN2"                     : INPUT_PIN  = 65     ;
    "M_10MIN3"                     : INPUT_PIN  = 11     ;
    "S_1MS0"                       : INPUT_PIN  = 126    ;
    "S_1MS1"                       : INPUT_PIN  = 111    ;
    "S_1MS2"                       : INPUT_PIN  = 117    ;
    "S_1MS3"                       : INPUT_PIN  = 63     ;
    "S_1S0"                        : INPUT_PIN  = 119    ;
    "S_1S1"                        : INPUT_PIN  = 62     ;
    "S_1S2"                        : INPUT_PIN  = 89     ;
    "S_1S3"                        : INPUT_PIN  = 112    ;
    "S_10MS0"                      : INPUT_PIN  = 124    ;
    "S_10MS1"                      : INPUT_PIN  = 12     ;
    "S_10MS2"                      : INPUT_PIN  = 113    ;
    "S_10MS3"                      : INPUT_PIN  = 114    ;
    "S_10S0"                       : INPUT_PIN  = 118    ;
    "S_10S1"                       : INPUT_PIN  = 67     ;
    "S_10S2"                       : INPUT_PIN  = 110    ;
    "S_10S3"                       : INPUT_PIN  = 64     ;
    "S_100MS0"                     : INPUT_PIN  = 68     ;
    "S_100MS1"                     : INPUT_PIN  = 72     ;
    "S_100MS2"                     : INPUT_PIN  = 70     ;
    "S_100MS3"                     : INPUT_PIN  = 13     ;
    "OUTBCD0"                      : OUTPUT_PIN = 92     ;
    "OUTBCD1"                      : OUTPUT_PIN = 100    ;
    "OUTBCD2"                      : OUTPUT_PIN = 69     ;
    "OUTBCD3"                      : OUTPUT_PIN = 83     ;
    "SEG0"                         : OUTPUT_PIN = 102    ;
    "SEG1"                         : OUTPUT_PIN = 101    ;
    "SEG2"                         : OUTPUT_PIN = 98     ;
    "|LPM_ADD_SUB:114|addcore:adder|:55" : LOCATION   = LC4_C9 ;
    "|LPM_ADD_SUB:114|addcore:adder|:69" : LOCATION   = LC1_C9 ;
    ":36"                          : LOCATION   = LC6_C7 ;
    ":38"                          : LOCATION   = LC2_C5 ;
    ":40"                          : LOCATION   = LC6_C3 ;
    ":42"                          : LOCATION   = LC4_C1 ;
    ":44"                          : LOCATION   = LC2_C11;
    ":46"                          : LOCATION   = LC4_C11;
    ":48"                          : LOCATION   = LC3_C11;
    ":50"                          : LOCATION   = LC6_C9 ;  -- COUNT3
    ":51"                          : LOCATION   = LC3_C9 ;  -- COUNT2
    ":52"                          : LOCATION   = LC5_C9 ;  -- COUNT1
    ":53"                          : LOCATION   = LC8_C9 ;  -- COUNT0
    ":89"                          : LOCATION   = LC7_C9 ;
    ":551"                         : LOCATION   = LC5_C11;
    ":554"                         : LOCATION   = LC1_C7 ;
    ":567"                         : LOCATION   = LC3_C7 ;
    ":568"                         : LOCATION   = LC2_C7 ;
    ":575"                         : LOCATION   = LC8_C11;
    ":578"                         : LOCATION   = LC4_C7 ;
    ":587"                         : LOCATION   = LC4_C8 ;
    ":590"                         : LOCATION   = LC8_C7 ;
    ":599"                         : LOCATION   = LC6_C8 ;
    ":602"                         : LOCATION   = LC1_C6 ;
    ":611"                         : LOCATION   = LC2_C9 ;
    ":614"                         : LOCATION   = LC3_C6 ;
    ":623"                         : LOCATION   = LC1_C11;
    ":626"                         : LOCATION   = LC5_C7 ;
    ":635"                         : LOCATION   = LC6_C11;
    ":638"                         : LOCATION   = LC7_C7 ;
    ":647"                         : LOCATION   = LC7_C11;
    ":659"                         : LOCATION   = LC1_C5 ;
    ":663"                         : LOCATION   = LC4_C5 ;
    ":664"                         : LOCATION   = LC3_C5 ;
    ":665"                         : LOCATION   = LC8_C5 ;
    ":668"                         : LOCATION   = LC7_C8 ;
    ":671"                         : LOCATION   = LC5_C8 ;
    ":674"                         : LOCATION   = LC5_C5 ;
    ":677"                         : LOCATION   = LC6_C5 ;
    ":680"                         : LOCATION   = LC7_C5 ;
    ":692"                         : LOCATION   = LC1_C3 ;
    ":696"                         : LOCATION   = LC3_C3 ;
    ":697"                         : LOCATION   = LC2_C3 ;
    ":698"                         : LOCATION   = LC4_C3 ;
    ":701"                         : LOCATION   = LC3_C8 ;
    ":704"                         : LOCATION   = LC8_C8 ;
    ":707"                         : LOCATION   = LC5_C3 ;
    ":710"                         : LOCATION   = LC7_C3 ;
    ":713"                         : LOCATION   = LC8_C3 ;
    ":725"                         : LOCATION   = LC1_C1 ;
    ":729"                         : LOCATION   = LC3_C1 ;
    ":730"                         : LOCATION   = LC2_C1 ;
    ":731"                         : LOCATION   = LC6_C1 ;
    ":734"                         : LOCATION   = LC1_C8 ;
    ":737"                         : LOCATION   = LC2_C8 ;
    ":740"                         : LOCATION   = LC5_C1 ;
    ":743"                         : LOCATION   = LC7_C1 ;
    ":746"                         : LOCATION   = LC8_C1 ;