mulx.vhd

来自「数字秒表具有正及时倒计时功能包括一些设计要求和原资料」· VHDL 代码 · 共 65 行

LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
ENTITY MULX IS
PORT (CLK,CLR,EN:  IN STD_LOGIC;
S_1MS:     IN STD_LOGIC_VECTOR(3 DOWNTO 0);
S_10MS:    IN STD_LOGIC_VECTOR(3 DOWNTO 0);
S_100MS:   IN STD_LOGIC_VECTOR(3 DOWNTO 0);
S_1S:      IN STD_LOGIC_VECTOR(3 DOWNTO 0);
S_10S:     IN STD_LOGIC_VECTOR(3 DOWNTO 0);
M_1MIN:    IN STD_LOGIC_VECTOR(3 DOWNTO 0);
M_10MIN:   IN STD_LOGIC_VECTOR(3 DOWNTO 0);
HOUR:      IN STD_LOGIC_VECTOR(3 DOWNTO 0);
OUTBCD:   OUT STD_LOGIC_VECTOR(3 DOWNTO 0);
SEG:      OUT STD_LOGIC_VECTOR(2 DOWNTO 0));
END MULX;
ARCHITECTURE ART OF MULX IS
SIGNAL  COUNT:STD_LOGIC_VECTOR (3 DOWNTO 0);
BEGIN
PROCESS(CLK)
  BEGIN
IF  CLR='1'THEN
   COUNT<="0000";
ELSIF  RISING_EDGE(CLK)THEN
   IF  EN='1'THEN
        IF  COUNT="1001"THEN
                COUNT<="0000";
             ELSE
                 COUNT<=COUNT+'1';
             END  IF;
           END  IF;
         END  IF;
       END  PROCESS;
           PROCESS(CLK)
               BEGIN
               IF  CLK'EVENT  AND  CLK='1'THEN
                   CASE  COUNT  IS
            WHEN"0000"=>OUTBCD<=S_1MS;    SEG<="000";

            WHEN"0001"=>OUTBCD<=S_10MS;   SEG<="001";

            WHEN"0010"=>OUTBCD<=S_100MS;  SEG<="010";

            WHEN"0011"=>OUTBCD<=S_1S;     SEG<="011";

            WHEN"0100"=>OUTBCD<=S_10S;    SEG<="100";

            WHEN"0101"=>OUTBCD<=M_1MIN;   SEG<="101";

            WHEN"0110"=>OUTBCD<=M_10MIN;  SEG<="110";

            WHEN"0111"=>OUTBCD<=HOUR;     SEG<="111";

            WHEN"1000"=>OUTBCD<=S_1MS;    SEG<="000";

            WHEN"1001"=>OUTBCD<=S_10MS;   SEG<="001";

            WHEN OTHERS=>OUTBCD<=S_1MS;  SEG<="000";

                 END CASE;
             END  IF;
       END  PROCESS;
END  ART;